Description

Hangcha 16t 2007 Parts Catalog – Factory OEM Parts Breakdown

If you've ordered a part for a 16-ton Hangcha forklift and watched it sit on the shelf because the aftermarket number didn't match, you know the problem. This Hangcha 16t 2007 Parts Catalog fixes that. It's the factory document – 122 pages of OEM part numbers, drawings, and assembly references for the CPCD160-W2 and CPCD160-W25 variants. Not a reprint, not a scan of a scan. Original factory print from 2007.

What's Inside the 122-Page Catalog?

You get the complete parts breakdown for every major assembly on these 16-ton counterbalance forklifts. The Table of Contents lists 21 figures covering the driving system (Fig. 2), steering axle (Fig. 3), steering cylinder (Fig. 4), steering tyre (Fig. 5), steering device (Fig. 6), drive system (Fig. 7 for the W2, Fig. 8 for the W25), air inlet (Fig. 9 and 10), exhaust system (Fig. 11), cooling system (Fig. 12 and 13), fuel system (Fig. 14 and 15), engine mount (Fig. 16), truck body (Fig. 17), hydraulic oil tank (Fig. 18), fuel tank (Fig. 19), counterbalance (Fig. 20), and small oil tank (Fig. 21). Page 21 holds the full exhaust system diagram with every part number and the model code indicator so you know exactly which muffler or bracket fits your specific truck.

Each figure is accompanied by a parts table listing the drawing code, standard number, description, and applicable model (○A for CPCD160-W2, ○B for CPCD160-W25). That kind of detail saves you from ordering a throttle cable that's half an inch too short.

Two Variants, One Catalog

This catalog covers both the CPCD160-W2 (6BTA5.9 engine, 3WG-171 transmission) and the CPCD160-W25 (QSB6.7 engine). The factory uses a simple marker system: wherever you see ○A, that part goes on the W2; ○B means it fits the W25. Some parts are shared, and those have no marker. The instruction section on page 2 explains the lookup method clearly in English and Chinese. If you own either model, this is the only parts list you need.

Factory Part Number Accuracy – Why It Matters

Aftermarket parts catalogs often leave out revision codes, supersession notes, or the subtle differences between model years. This OEM document gives you the exact drawing number and standard code straight from Hangcha's engineering department. Page 3 of the catalog states: "It is recommended to use the parts and components made by us for ideal service and maintenance." They mean it. When you order a part using the number from this catalog, you get the factory-designated piece – not a generic substitute that might need a washer stack to seal.

How to Use This Catalog to Order Parts

Start by finding the assembly drawing that matches the component you need. For example, if the steering cylinder is leaking, go to Fig. 4 on page 12. Identify the part number in the table, note the model marker, then quote that number along with your forklift's model and serial number when calling the parts counter. The catalog even gives the part name in both Chinese and English. Skip the guesswork – use the factory lookup method described on page 2.

Related Manuals for Hangcha Forklifts

• Hangcha CPDS13-CPDS20JC1 Parts Catalog – 96-Page Factory Parts List
• Hangcha J Series Parts Catalog – 94 Pages of Factory Specs
• Hangcha CPCD120-160 Series 2011 Parts Catalog – 178 Pages OEM

For broader context on industrial equipment standards, see the Automotive Industry Overview.

Another useful reference on forklift design lineage is the Automotive Industry Overview.

Frequently Asked Questions

Can I use this catalog to rebuild the transmission?

No. This is a parts catalog, not a service manual. It lists part numbers and diagrams, not torque specs or assembly steps.

Will this catalog fit my CPCD160-W2 forklift from 2008?

This 2007 edition covers the CPCD160-W2 and W25 models exactly as built in that production year. If your forklift was built in 2008, the part numbers should still match unless Hangcha issued a revision. Cross-check the engine and transmission codes on your nameplate (Fig. 1 of this catalog lists the nameplate details) against the specifications on page 4. For any discrepancy, contact Hangcha parts support with your serial number – the catalog includes the contact page from the factory.

Stop wasting time on mismatched parts and returned orders. Access the Factory Manual now and get the exact OEM part numbers for your Hangcha 16t forklift.