Description

Kramer 320, 310 Parts Catalog – Factory Spare Parts List

Kramer 320, 310 Parts Catalog — 486 pages of factory-issued spare parts documentation. If you maintain a Kramer 320EURO or 310 wheel loader, this is the only parts list you need on the bench. I have pulled parts off machines blindly with aftermarket lists and wasted half a day on wrong fasteners. You do not have to do that. This book came out of Kramer-Werke GmbH in 1999 (Edition 2.0) and it carries the same part numbers the dealer uses. Order number 0 38 003 06 90. No guessing.

Aftermarket parts catalogs often use generic cross-references that do not match the actual bolt grade or thread pitch. That gets you a cracked housing or a hydraulic leak at the worst moment. This catalog is the original German/English/French document printed in the Federal Republic of Germany. Every exploded view, every part number, every quantity — verified by the manufacturer. The pdf file weighs in at 486 pages and covers both the 320 and 310 models. If you own either machine, buy this one catalog.

What the 486 Pages Contain

The table of contents starts with an Einleitung (Introduction), Zeichenerklärung (Signs and symbols — know what each cross means before you order the wrong seal), and Abkürzungen (abbreviations). After that, the manual groups parts by the major assemblies of the loader: engine, transmission, axles, hydraulic system, electrical, frame, and attachments. Each section shows an exploded illustration with call-outs. Right next to the drawing you get the official spare part number, description, and quantity per machine. No need to guess which revision of the hydraulic pump you have — the part number is there.

One thing I like: the catalog separates standard parts from optional equipment (SOs — Sonderausrüstungen). That keeps you from ordering a part that does not apply to your serial number. Speaking of serial numbers — this edition is valid from chassis serial no. 310 56 0001 upward. So if your machine falls in that range, the parts are correct.

Does This Catalog Cover the 320 and 310?

Yes. The title says Kramer 320, 310 Parts Catalog, and inside the book both models are treated together. The 320EURO is the wheel loader shown on the cover. The 310 is the smaller companion. Most sections list parts for both with a column to indicate which model uses each part. If you run a mixed fleet, one catalog covers both machines. The file name confirms it: Kramer_320-310_Parts_Catalog_de-en-fr-36514005579.pdf. Three languages, two models, one reference.

Parts Catalogs vs. Service Manuals — Know the Difference

This is not a repair manual. It does not tell you how to remove the cylinder or what torque to apply on the wheel nuts. It is a parts catalog — exploded diagrams with part numbers and ordering codes. If you need repair procedures, look for the corresponding service manual. For ordering the correct replacement part, this is your document. After you identify the part number, you can call a dealer and give them the exact eight-digit number from the book. No wasted calls, no returns.

I have seen shops use aftermarket parts books and end up with the wrong bearing because the cross-reference was for a different production year. The OEM catalog from Kramer eliminates that. The edition history printed inside shows updates from 1.0 (September 96) through 2.0 (February 99). Each rev fixed errors and added new parts. This is the final paper edition.

Source Authenticity — Not a Photocopy or Third-Party Reprint

The document we sell is a direct digital copy of the original factory book. It was printed by Kramer-Werke GmbH in Überlingen, Germany. The copyright notice on page one forbids reproduction without written permission — that is how you know it is the real thing. No scanner noise, no missing pages, no aftermarket watermark. The file opens clean on any PDF reader. If you work on construction equipment, you know the difference between an OEM binder and a cheap knockoff. This is the original.

You can cross-check the order number on the cover: 0 38 003 06 90. That number is unique to this parts catalog. If someone sells you a parts list for a Kramer 320 without that order number, be suspicious. We do not deal in reprints or aftermarket compilations. Factory spec only.

7 Systems and Assemblies Covered in the Catalog

Based on the section numbering in the file, the catalog covers at minimum these major systems:

• 31056e0100 — likely engine-related parts (radiator, filters, mounts)
• 31056e0800 — drivetrain (axles, differential, final drives)
• 31056e1000 — hydraulic system (pump, valve block, cylinders)
• 31056e1600 — electrical system (starter, alternator, wiring harnesses)
• 31056e1700 — frame and attachments (bucket, linkage, cab)
• 31056e2000 — steering system
• 31056e2100 — brakes and air system

Each section includes a parts drawing with numbered balloons and a table with part numbers, descriptions, and quantities. The index (Inhaltsverzeichnis) starts on page I-1 and lists every group. You flip to the section you need, find the illustration, read the part number. That is it.

FAQ — Four Questions You Will Ask

Will this parts catalog work for my 1997 Kramer 310?

Yes, if the chassis serial number is 310 56 0001 or higher. The catalog edition 2.0 (Feb 99) covers all earlier models as well, but the parts listing is updated to the 1999 spec. For a 1997 machine, most parts will be correct. Check the part number against the actual part before ordering if you are unsure.

Is this manual in English?

The catalog is trilingual: German, English, French. The part descriptions and headings appear in all three languages on each page. For an English speaker, the English column is present throughout.

Can I print the PDF?

Yes. The file is not locked. You can print individual pages or the entire 486-page book. We recommend printing only the section you need to avoid a stack of paper on your bench.

Why should I buy from AutoRepairManuals instead of a free access site?

The free documents often are incomplete — missing pages, wrong edition, or corrupted scans. This is a complete, clean digital copy of the original Kramer book. We guarantee it matches the factory binder. Plus, you get support if the file does not open. A free site will not answer your email when a page is missing.

Related Manuals You Might Need

• Kramer 320 Spare Parts List
• Kramer 850 2010 Parts Catalog – OEM Spare Parts List
• Kramer 3207 2008 Parts Catalog – OEM Spare Parts List

If you are serious about keeping your Kramer loader running without costly downtime, get the factory parts catalog. One purchase gives you every exploded view and part number for the 320 and 310. No wasted phone calls to the dealer guessing which hydraulic fitting you need. Automotive Industry Overview — I mention that external link only because understanding the difference between OEM and aftermarket documentation applies to every piece of equipment you work on. Access the Factory Manual now and keep it on your tablet in the shop.