Description

Kramer 3207 2008 Parts Catalog – OEM Exploded Views and Part Numbers

You ever order a part for a Kramer 3207 based on an aftermarket number, only to find the bolt holes don’t line up or the seal is the wrong diameter? I’ve wasted enough billable time on that garbage. This Kramer 3207 2008 Parts Catalog is the factory-issued document – 226 pages of exploded views and original part numbers straight from the Kramer Werke GmbH press. No guesswork on supersessions, no mismatched illustrations. Each section covers a specific system: engine, cooling, brake assembly, drive units, steering, hydraulics, electrics, even the heating and air conditioning. If you’re working on a 3207 telescope loader built from serial number 401 02 0001, this is the only spare parts list you need on your bench.

Engine and Cooling Sections – Real Part Numbers for the 3207

The catalog dedicates separate chapters to the Engine (Motor / Moteur) and Cooling (Kühlung / Refroidissement). Inside, you will find exploded diagrams with callout numbers linked directly to the parts number reference list in the back. Unlike third-party reprints that blur the font sizes, this OEM scan keeps every figure legible. Need the thermostat housing gasket for a 2008 3207? The engine section shows the housing, the seal, and the bolt kit in the same view. No flipping back and forth between unrelated pages. The cooling section covers the radiator, fan assembly, and coolant lines – all with Kramer’s original part designations. That cuts order errors by a wide margin.

How to Use the Parts Number Reference List

The catalog includes a dedicated Teilesuchliste (Parts Number Reference List) in Part B of the document. This is a sorted list of all part numbers with corresponding figure numbers and item callouts. You locate the part number, then flip to the figure page to verify fitment. It’s the same system used at dealerships in Pfullendorf. If you have an old part number that starts with 1000106626, you can cross-check the supersession history printed in the legend (page 3 lists the edition history from 1.0 to 1.6, covering updates through December 2008). That Automotive Industry Overview might explain why OEM documentation is critical, but this catalog shows you exactly why.

3 Sections That Save You from Wrong Orders

Brake assembly (Bremsanlage / Système de Freinage) – this section shows the master cylinder, calipers, lines, and parking brake mechanism with original Kramer part numbers. One wrong seal and you’re bleeding brakes twice. The explosion views label every component individually.
Drive units (Antriebseinheiten / Unités de Propulsion) – covers the transmission, drive shafts, and axles. If you need a bearing or a flange, the diagram references the correct axle group (Achsen / Axes).
Loader unit / Arm system (Ladeanlage / Armsystem) – critical for the telescopic boom. Pins, bushings, cylinders – all illustrated with bolt sizes and quantities.

Check the Brake Assembly Section First

If you’re ordering parts for a 3207 that pulls to one side or has a spongy pedal, start with the Brake section. The catalog includes both the hydraulic system components and the mechanical linkage. Each line is drawn with the correct routing; the part numbers match what Kramer shipped in 2008. I’ve seen aftermarket catalogs swap the left and right calipers for these machines – the factory drawing shows the orientation. Trust the OEM diagram, not a screenshot from a forum.

Kramer 3207 2008 Parts Catalog: OEM vs Aftermarket

Aftermarket parts lists often copy old editions and miss revisions. The Kramer 3207 underwent several updates between 2006 and 2008 (editions 1.0 through 1.6). This catalog is edition 1.6 – the final version from December 2008. It includes all serial number cut‑ins and cut‑outs marked with “A” (discontinued parts) and “E” (newer parts). The “General Informations” section explains the pictograms: safety parts, non‑serviceable assemblies, torque symbols, and sealant locations. You will not find that level of detail in a generic compilation. For related models, check the Kramer 850 2010 Parts Catalog – OEM Spare Parts List”>Kramer 850 2010 Parts Catalog or the Kramer 750T Spare Parts List (German/English/French)”>Kramer 750T Spare Parts List (German/English/French). The Kramer 3606 Spare Parts List”>Kramer 3606 Spare Parts List covers a similar telescope loader family.

Does this catalog include torque specifications?

No. This is a parts catalog, not a service manual. Torque values for head bolts, caliper mounting, and hydraulic fittings are in the shop manual.

How do I find a part number if I only have the old 7‑digit number?

Flip to the Parts Number Reference List in Part B (page 4 onward). The list sorts numbers alphanumerically and links to the figure where the part appears. Match the old number to the new supersession – the legend explains the “A” and “E” annotations for discontinued or replacement parts. If the number isn’t found, check the edition history on page 2 to see if your serial number falls under a different revision. For example, edition 1.5 (June 2008) added several loader arm components; edition 1.6 (December 2008) updated the brake master cylinder assembly. The catalog covers all changes across serial number 401 02 0001 onward.

When you need a part number for a Kramer 3207, stop flipping through blurry aftermarket PDFs. Access the Factory Manual – the original 2008 Kramer parts catalog with 226 pages of verified diagrams and part numbers for the engine, cooling, brake, and every other system on the telescope loader.