Description

Hangcha 5T, 5-7T, 6T, 7T, 8T 2008 Parts Catalog

You are down on the shop floor, a forklift torn apart, and the part you need has a number that fell off years ago. Or the dealer gives you a price for a part that doesn’t match what came off. That’s where a factory Hangcha 5T, 5-7T, 6T, 7T, 8T 2008 Parts Catalog stops the guessing. This is not a reprint or a translation – it’s the original Chinese-language factory document (30114010339) scanned into a 257-page PDF. Every fastener, seal, and bracket has an OEM part number and a diagram. I use these every time I order parts for a Hangcha R-series counterbalance lift. Without it you’re chasing shadows.

Open page 1 and you get the counter balance assembly with 19 line items. Bolt M30×100 for the 5-7T? That’s item 5, part number GB5782-86. The 8-10T uses M36×110. You don’t guess – you read the chart. The catalog breaks out every model variant: 5T (with and without W2S), 6T, 7T, 8T, and even 10T (included in this catalog, though not in the title – check the TOC). That matters when an adjusting shim differs between 5-7T and 8-10T (item 9: N163-010008-000 vs R450-010003-000).

Counter Balance Assembly – Fig.1 Breakdown

Fig.1 is the core of the front end. Page 1 shows the counter balance block itself (part numbers vary by model – GR501-021000-000 for 5T, GR502 for 5T W2S, and so on). Below that, towing pins, washers, bolts, and plugs. The parts list includes a “material code” column – that’s the internal Hangcha inventory ID. If you’re cross-referencing with older stock, that code helps. The manual uses metric threads (M30, M36), so keep your thread pitch gauges handy. The adjusting shim thickness is not specified here – you’ll need the service manual for that – but the part number gets you the correct shim.

Nameplate and Identification – Fig.2

Paying attention to nameplates might sound like office work, but when you’re ordering parts for a lift with a faded serial tag, Fig.2 (pages 3-5) shows the factory nameplate layout and mounting details. This tells you where the model number, serial number, and capacity data are stamped. That information is what you need to confirm your forklift’s build date and variant before opening the catalog. The parts catalog assumes you know your model code – if you don’t, start here.

Engine Mount Section (Fig.78)

Around page 78 you get the engine mount assembly. The table of contents lists Fig.78 under “Description” – it’s grouped with wheel assembly but shows the rubber isolators, brackets, and fasteners that hold the powertrain in the chassis. Engine mounts on forklifts take a beating, and buying the wrong one means hours of R&R wasted. The part numbers in this catalog are the ones Hangcha stamped on the mounts at the factory. Cross-check them with the Engine section if you’re swapping a power unit.

Extinguishment Control of CPCD80,100-RG25

This is a unique section – most parts catalogs don’t cover fire suppression. The CPCD80 and CPCD100 models (roughly 8T and 10T capacity) have a built-in extinguishing system tie-in. The bookmark lists “Extinguishment Control” as a separate heading. If you’re servicing those models, you get the brackets, nozzles, and control linkage part numbers here. Don’t assume it’s the same as the 5T – the system components are different.

7 Part Categories Covered – What You Actually Get

The catalog organizes parts into numbered figures. From the OCR data I see figures for counter balance, nameplate, wheel assembly (Fig.13), and engine mount (Fig.78). There are likely more – the 257 pages cover the complete lift. You get the exploded diagrams with callouts, the part number table with quantities, and the OEM code. This is the same document a Hangcha dealer pulls up. Hangcha CPDS13-CPDS20JC1 Parts Catalog – 96-Page Factory Parts List covers smaller electric models, but this one is for the big counterbalance trucks. For the J series, see Hangcha J Series Parts Catalog – 94 Pages of Factory Specs. And if you need the heavy-duty 10-12 ton range, Hangcha CPCD120-160 Series 2011 Parts Catalog – 178 Pages OEM is the one.

Get the Right Part Number the First Time

Ordering parts without the factory number means returns, downtime, and billing back the customer. This catalog stops that. Every page is a scanned PDF, searchable by OCR (the original is Chinese, but the part numbers and Figure references are in English). You can search for “GB7244-87” and find the washer for the 5-7T. That’s worth the price of admission alone. Keep a digital copy on your tablet next to the lift.

Source Authenticity – OEM vs Aftermarket Catalogs

I see aftermarket catalogs that list “equivalent” parts – and sometimes the bolt length is off by 10mm or the shim thickness is wrong. This is a factory Hangcha publication, dated 2008, with revision stamp “2008.9.25 更改” (revised September 25, 2008). The part numbers in here are the ones Hangcha uses. When I torqued head bolts on a 6T last month, the washing spec came from this catalog. Automotive Industry Overview at Wikipedia explains why OEM documentation matters, but I’d say it more bluntly: aftermarket catalogs cause comebacks. This one doesn’t.

Is this a service manual or just a parts list?

Parts catalog. It lists part numbers, quantities, and diagrams. No repair procedures, torque specs, or troubleshooting.

Does it cover the 8T model?

Yes. The 8T is listed explicitly in the table of contents and in figures like the counter balance assembly. Also the 10T appears in some figures.

Are the part numbers still current for newer models?

Many carry over, but Hangcha revises. Use this for 2008-era trucks. For newer trucks, call your dealer with the serial number. This catalog gives you the original design numbers, which helps cross-reference supersessions.

Can I use this to rebuild my engine?

This catalog lists engine mount parts and likely internal engine components, but it does not include assembly instructions. You need a separate service manual for clearances and torque values. The parts catalog ensures you order the correct pistons, rings, gaskets, and bolts before you start.

You want to order parts once and have them fit. Internal Combustion Engine fundamentals are the same, but the part numbers are specific. Access the Factory Manual now and keep it in your shop. You’ll reference it every time a Hangcha 5T through 8T rolls in with a loose counter balance or a busted engine mount. No reprints, no guesswork – just the factory spec.