Description

AUSA 150 DH, 120 DH, 108 DH Parts Catalog – Factory OEM Exploded Views

Ever ordered a part for an AUSA 150 DH, 120 DH, 108 DH Parts Catalog machine only to get the wrong piece because you guessed the number? I’ve seen guys pull a hydraulic pump seal that looked right but was 0.5mm off. That’s a lost afternoon and a tow bill. This is the actual factory-issued parts catalog – the same binder the dealer uses. 98 pages of exploded-view drawings, table numbers, figure numbers, and OEM reference codes. No aftermarket transcription errors. No third-party guesswork. If you’re working on a 150 DH, 120 DH, or 108 DH and need to order anything from a brake cylinder to a steering knuckle, this is the document you want on your bench.

Parts List Format: Four Numbers You Need

Page 5 of the catalog spells it out: to order a spare, you must provide the chassis number, table number, figure number, and reference number. The manual is trilingual (English, Spanish, French, German) so the part descriptions are cross-referenced. The manufacturer includes a note that specs can change without notice – that’s why you trust the factory document, not a photocopy from 2008. For a 150 DH, the chassis range P R O 1 2 0 4 0 0 5 6 is listed; confirm yours falls in the range before ordering.

98 Pages of Exploded Diagrams

Each major component – transmission, axles, steering, hydraulic system – gets its own figure with numbered callouts. The parts list underneath gives the OEM part number, quantity, and description. If you’ve ever tried to match an aftermarket catalog’s generic drawing to your actual AUSA 120 DH, you know the headache. This catalog shows the exact shape and orientation. Rear axle seal? You’ll see the snap ring groove and the exact seal profile. That saves you from buying a seal kit that doesn’t fit the bore depth.

Related manuals for similar-model AUSA equipment: AUSA 120 DH D 108 RM D 150 RM Parts Catalog 98 Pages OEM, AUSA C 500 H Parts Catalog – Factory OEM Exploded Diagrams, AUSA D 150 AHG Parts Catalog – Factory Exploded-View Manual.

Why Factory OEM Beats Aftermarket Copies

I’ve seen reprints from third-party houses where the figure number is smudged or the reference number is shifted by one digit. That gets you a $400 master cylinder instead of the $15 o-ring. The original file for this catalog – AUSA_150_DH-120_DH-108_DH_Parts_Catalog_es-fr-en-de-16214013225.pdf – is a direct scan of the manufacturer’s release. No redrawn lines. No reinterpreted dimensions. If you need to match a bolt thread pitch, the drawing scale is correct. This matters when you’re standing in the parts room and the counter guy asks, “Table and figure?”

The Automotive Industry Overview covers the wider context of industrial vehicle standards, but this catalog gets specific. Another Automotive Industry Overview article won’t tell you the part number for the 108 DH steering column bushing. This catalog will.

Who Needs This Catalog

If you own a single AUSA 108 DH or manage a fleet of 150 DH dumpers, same answer. The parts list covers all three models – 150 DH, 120 DH, 108 DH – in one document. The exploded drawings are the same, but the reference numbers differ by model. You don’t need a separate manual for each. A home garage mechanic swapping a hydraulic filter on a 120 DH can use the same diagrams the dealer tech uses. The only difference: the hobbyist will need to read the chassis number off the frame tag (it’s stamped near the steering column).

One warning: this is a parts catalog, not a service manual. It won’t give you torque specs or disassembly steps. For that, you need the corresponding repair manual. But if you’re ordering parts, don’t mix them up.

FAQ

Does this manual include torque values?

No. This is a parts catalog – exploded views and part numbers only. Torque specs are in the service manual.

Will this catalog work for my AUSA 150 DH built in 2005?

Check the chassis number range printed on page 5: P R O 1 2 0 4 0 0 5 6. If your chassis number falls within that batch, the drawings match. If not, you may need a later revision. The manufacturer reserves the right to change parts without notice, so always verify the table and figure numbers against your actual machine.

Can I print this PDF and take it into the shop?

Yes. The searchable PDF is high-contrast, and each figure is on its own page. Print the figure you need and circle the reference number. I do that for every job – keeps grease off the screen.

How do I order parts using this catalog?

You need four pieces of info from the manual: chassis number, table number, figure number, and reference number. Page 5 explains the process in four languages. Take those numbers to your nearest AUSA dealer. If you try ordering without all four, expect delays or wrong parts.

Stop playing the parts lottery. When you need a genuine AUSA 150 DH, 120 DH, or 108 DH part, reference the factory diagrams and part numbers directly from the source. Access the Factory Manual now and keep it on your tablet or printed binder.