Description

Still RX60-40, RX60-45, RX60-50 2006 Parts Catalog

If you are trying to order parts for a Still RX60-40, RX60-45, RX60-50 and end up with the wrong bearing, seal, or wiring harness, you lose billable time and money. A factory parts catalog eliminates that guesswork. This 2006 Parts Catalog runs 550 pages and comes straight from Still—not a third-party reprint. You get the same part numbers, exploded views, and revision codes that Still service centers use.

RX60-40, RX60-45, RX60-50 Parts Catalog: What You Get

This catalog is organized by major system. Each section lists the figure number, part number, quantity, description, and any remarks or norm type. You open to page 2 and see the full table of contents: PRODUCT INFORMATION, ELECTRIC MOTOR, MECHANICAL DRIVE AXLE, CHASSIS, OPERATOR’S COMPARTMENT, STEERING SYSTEM, WHEELS AND TYRES, BRAKING SYSTEM, CONTROLS, DISPLAY ELEMENT, ELECTRICS; ELECTRONICS, ELECTRONIC CONTROLS, HYDRAULICS, WORKING HYDRAULICS, VALVE, LOAD LIFTING SYSTEM, MAST, LOAD CARRIER, ATTACHMENTS, SPECIAL EQUIPMENT NARROW AISLE TRUCKS, OTHER ACCESSORIES. That is every subsystem on the truck.

550 Pages of OEM Part Numbers

Page count matters. A 50-page aftermarket list leaves you hunting for the correct revision of a counterweight or the right option code for a heated cab. Here, the CHASSIS section alone breaks down into CHASSIS COMPL. (standard), CHASSIS COMPL. (6330, with prepare to battery full out thrust), FLOOR PLATE (standard with signal switch), and COUNTERWEIGHT COMPL. (R6327). You also get the PANELLING COVERING including the STILL badge. When a customer wants the exact floor plate with travel sender, you flip to that subsection and read the part number straight from the factory diagram.

Does This Catalog Cover the Steering System?

It does, and it goes deeper than most aftermarket lists. The STEERING SYSTEM section includes CONTROL UNIT, HANDBRAKE CONTROL, HAND BRAKE COMPL. (listed twice with different option codes), STEERING WHEEL WITH STEERING COLUMN, STEERING AXLE, and STEERING CYLINDER. Two date ranges are given for the steering cylinder: from week 44, 2003, and from week 48, 2007. That kind of revision tracking is typical of OEM documentation. If you order a cylinder for an early-2004 RX60-45 from a generic list, you might get the wrong port orientation. With this catalog, you match the week.

Get the Right Part the First Time

Stop ordering twice. The OPERATOR’S COMPARTMENT section lists DRIVER SEAT COMPL. (MSG 65 imitation leather without buckle switch) and PARTS INTERCHANGEABLE sets for the MSG75 with mini-lever. The OVERHEAD GUARD section carries a warning: CE conformity is voided for trucks without overhead guard and a lifting height over 1800 mm. That is the kind of legal note you will not find in a third-party PDF. The catalog also covers retrofits: standard cab weather guard, container cab, standard cabin, container cabin, tarpaulin cabin—each with its own retrofit kit part number. If your shop does a lot of used truck refurbishing, this section alone pays for the manual.

CHASSIS and OPERATOR’S COMPARTMENT Sections

The CHASSIS chapter includes detailed breakdowns of the counterweight, paneling, front hood, rear paneling, and steering column shroud. Under OPERATOR’S COMPARTMENT you get the driver cab types, seat assemblies, cover and panels insulation, superstructures (standard and Komatsu version), supports and storage facilities, heating, and overhead guard. The ELECTRICS; ELECTRONICS section maps cable trees for frame, roof, and control cable looms, plus lighting, working lights, electrical installation in roof/frame/counterweight, hazard warning system, and protective covers. A parts catalog this thick means fewer phone calls to the dealer and more parts installed on the first try.

For a complete picture of the RX60-40 family, see the related STILL RX60-40 RX60-45 RX60-50 2006 Parts Catalog. If you work on other Still models, check the Still RC 40-16 2013 Parts Catalog – OEM Spare Parts List and the Still R70-16T, R70-18T, R70-20T 2016 Parts Catalog – OEM.

The Automotive Industry Overview may give context, but for actual part numbers you need factory data. Automotive Industry Overview won’t help you identify the correct travel sender. Stick with the source.

Frequently Asked Questions

Is this the same as the service repair manual?

No. This is a Parts Catalog — it lists part numbers, quantities, and exploded diagrams. It does not contain step-by-step repair procedures. For repairs you need the corresponding workshop manual.

Does the catalog include part numbers for the mast and attachments?

Yes. The LOAD LIFTING SYSTEM, MAST, LOAD CARRIER, and ATTACHMENTS sections are all present. You also get SPECIAL EQUIPMENT NARROW AISLE TRUCKS and OTHER ACCESSORIES. If the truck has an option like a container cab retrofit, the part number is listed under RETROFIT.

What format is the PDF in?

Searchable PDF with bookmarks matching the table of contents. The original file is titled STILL_RX60-40-RX60-45-RX60-50_2006_Parts_Catalog_de-en-fr-it-44014007239.pdf, meaning it includes German, English, French, and Italian descriptions.

Can I use this for a 2008 RX60-50?

It covers up to 2006 model year. Some parts will carry over, but revisions after 2006 (like the steering cylinder from week 48, 2007) are noted. For later builds, cross-reference the revision remarks. If you need a 2008 catalog, look for a newer edition.

Parts ordering is only as reliable as your reference. This factory catalog gives you the Still part numbers, diagrams, and option codes that match your truck’s build sheet. Access the Factory Manual and stop guessing part orders.