Description

Massey-ferguson MF400 Parts Catalog – Factory OEM, Not Aftermarket Crap

Mike Callahan here. I’ve lost count of the hours I’ve wasted chasing wrong part numbers because someone used a third-party cross-reference. If you’re working on a Massey-ferguson MF400 tractor loader or dozer, this Parts Catalog is the only way to be certain. It’s 538 pages of factory-original data—not a reprint, not a scanned copy of someone’s dog-eared manual. This is the actual ICM-issued parts book, printed in Italy, covering the MF400 with supplements A through E.

Here’s what you get: four clear sections. The first (tables 1–99) covers the base machine—engine, drivetrain, hydraulics, frame. The second (101–199) covers the loader attachment. Third (201–299) covers the dozer blade. Fourth (300+) covers special equipment like rippers. Each table groups parts with a diagram and a reference number. No flipping between 50 pages to find a single bolt.

4 Sections That Break Down the MF400

A lot of parts catalogs just dump every part number in alphabetical order and call it done. Not this one. The MF400 book is divided by function: machine, loader, dozer, special. If you’re replacing a hydraulic cylinder on the loader, you go to table 120-something, not page 400. The table numbering tells you exactly which section you’re in. That saves you the headache of hunting through 500 pages blind.

Take the dozer section (tables 201–299). Every blade mount, tilt cylinder pin, cutting edge—each item has a line drawing and a part number. You don’t have to guess whether the bolt is a 5/8 or 3/4. The catalog gives you the MF part number and the quantity. If a pin comes in pairs, it says “2”. If it’s “upon request”, they note that too. I’ve seen guys order a single bushing when the diagram clearly shows two—this catalog puts that in black and white.

Numerical Indexes: The Map to the MF400 Parts

Before you dive into the tables, use the indexes at the front. One index lists Massey-Ferguson part numbers in progressive order; the other lists Perkins engine numbers. Each entry gives you the table number and the reference number on that table. Page 4 explains exactly how to use them, and don’t skip that page. I’ve watched guys try to thumb through every page because they didn’t read the foreword. 538 pages is a lot of paper—let the index do the work.

If you have an old part number that’s worn off, the index can still help if you know the approximate range. But the fastest way is to start with the serial numbers: engine, crawler, loader, dozer, and ripper. The foreword includes blanks for writing those down. Do that first—write the serial numbers on there before you lose them. That’s the difference between ordering a part that fits and ordering a paperweight.

Loader and Dozer Equipment: Separate Sections

The loader section (101–199) covers everything from the bucket to the control valve. The dozer section (201–299) handles the blade assembly, tilt mechanism, and mounting brackets. If you’re retrofitting an old MF400 with a new bucket cylinder, the table for that specific assembly is right there. You don’t need to chase down a separate catalog for the attachment. Once you have the table number, you order by the MF part number. No cross-referencing to aftermarket listings that might be wrong.

Special equipment (tables 301 and up) includes rippers, winches, or other factory options. The catalog notes the date of issue and any supplements. This particular copy includes supplements A through E, meaning it’s been updated with revisions from the factory. Always check the supplement list—if your machine falls under a later serial range, you might need an updated page. The OEM process is built for that.

Is This the Right Parts Catalog for Your MF400?

If you own or work on a Massey-Ferguson MF400 industrial tractor, yes. But confirm your machine’s serial number and compare it against the coverage range in the foreword. The catalog covers the tractor loader and tractor dozer models with Perkins engines. It does not cover service procedures—no torque specs, no repair steps. That’s the separate service manual. This is purely for ordering parts.

Still, having the correct part number is half the battle. I’ve seen a $20 seal turn into a $200 job because a guy ordered the wrong one. This catalog eliminates that. For related machines, check the Massey-ferguson MF300 Parts Catalog – 607 Pages – Factory OEM or the Massey-Ferguson MF500 1977 Parts Catalog – 517 Pages Factory OEM and Massey-ferguson MF 500 B 1973 Parts Catalog – Factory OEM.

538 Pages of Factory Data – No Aftermarket Guesswork

Page 1 states it’s printed in Italy, publication 1436 367 M1. That’s the OEM source. I don’t trust aftermarket parts catalogs for old construction equipment—they often skip revisions or misplace numbers. This book came from the manufacturer’s industrial and construction machinery division. The parts are listed in the same format Massey-Ferguson used in their own parts departments. If you’ve ever tried to use a generic parts listing and ended up with a bolt that’s a half-inch too short, you’ll understand why this matters.

For a broader look at how factory documentation structures repairs across industries, see the Automotive Industry Overview for context. But honestly, stick to the factory papers. That’s the only way to keep your MF400 running without chasing phantom parts.

Can I use this parts catalog for repair procedures?

No, this is a parts catalog, not a service manual.

Are torque specifications included in this manual?

This catalog lists part numbers and quantities, not torque values. For service specs, you need the separate service manual.

How do I find a specific part number using this catalog?

Start with the numerical indexes at the beginning of the book. They list all part numbers in progressive order with table and reference numbers. Once you locate the table number, flip to that section. The catalog is divided into four sections: machine, loader, dozer, and special equipment. Each table groups related parts with exploded diagrams. If you have the old part number, the index will lead you directly. If you only have a description, you may need to browse the relevant section.

Does this catalog cover the MF400 tractor only or also attachments?

It covers the base machine (tables 1–99), loader equipment (101–199), dozer equipment (201–299), and special equipment (301+). So yes, attachments are included.

When you order from a parts book like this, you’re buying certainty. The part numbers come from the same source the factory uses. There are no shortcuts—just the right drawing and the right number. If you want that kind of accuracy on your bench, Access the Factory Manual.