Description

Manitou MHT10160 Parts Catalog – 512 Pages of OEM Parts Data

I’ve seen too many guys pull a part off a Manitou MHT10160, measure it with a tape, and order a generic replacement that doesn’t fit. That’s a waste of time and money. This is the factory parts catalog – 512 pages of exploded views, part numbers, and cross-references. No guesswork.

The catalog opens with a clear note: Manitou updates these manuals without notice. Page 1 tells you to contact the dealer or Manitou North America Parts Department if your model or part isn’t listed. That’s the kind of honesty you get from a manufacturer that doesn’t want you bolting on the wrong filter.

What’s Inside the 512-Page Parts Catalog

Every section is organized by system. You’ll find the engine oil filter, transmission oil filter, hydraulic oil filter cartridges (both exhaust and intake), fuel filter, air filter cartridge, engine belt, and hydraulic oil tank vent. Page 5 lists the exact OEM part numbers for these maintenance items. For the MHT10160, the hydraulic oil filter cartridge (intake) is listed with its own number – not a generic “fits all” substitute.

Beyond filters, the catalog covers the fuel tank plug, pump fuel filter cartridge, and all the seals and gaskets that keep your telehandler from leaking. If you’re chasing a hydraulic leak, the part numbers for O-rings and hoses are in the hydraulic section. You don’t get that from a third-party parts list.

Part Numbers You Can Trust

These are OEM numbers, not aftermarket cross-references. The catalog was published by Manitou North America, Inc., based in Waco, TX. It’s the same book the dealer uses when you call in a VIN. When you order a part using this catalog, you’re ordering the exact component that left the factory. That matters when you’re replacing a hydraulic pump or a steering cylinder.

For more on diesel engine basics, see this Wikipedia article on diesel engines. The MHT10160 uses a diesel powerplant, and understanding the filter circuit helps you avoid contamination issues.

Engine Oil Filter and Maintenance Parts

The filter section on page 5 is worth the price alone. You get the engine oil filter cartridge, the transmission oil filter, and the fuel filter – all with their own part numbers. The air filter cartridge is also listed. These are the parts you replace every 250 hours or at the annual service. Having the right number means you don’t waste time at the parts counter.

If you’re working on a diesel engine, this Wikipedia article on diesel engines explains the injection system that the fuel filter protects. The catalog includes the pump fuel filter cartridge as well – a separate part from the main filter. Don’t mix them up.

How to Order the Correct Part

Start by locating the system in the table of contents. Each exploded view shows the part with a callout number. Match that to the part list, get the OEM number, and call your Manitou dealer. The catalog gives you the Manitou North America Parts Dept. phone: 800-425-3727. Don’t rely on a generic parts website that lists “replaces OEM” – they often get it wrong.

When you order, mention the catalog number 6348276 and the revision date (11/06). This ensures the dealer references the same update level. The manual has been updated three times (05/04, 05/06, 06/06, 11/06), so if you have an earlier revision, you might miss superseded parts.

Why Aftermarket Parts Catalogs Fail

Third-party catalogs renumber parts and drop the “-L” suffix for the MHT10160L. The difference matters. The M Series E2 has a specific hydraulic filter configuration that’s different from the MHT10160 without the “L”. This catalog covers the MHT10160L variant. If you use a generic catalog, you’ll order the wrong intake filter cartridge and starve the pump.

Stick with the factory source. This is the same document that Manitou dealers use when they punch in a serial number. No guesswork, no “equivalent” parts that don’t seal.

Related Manuals for Your MHT10160

If you need repair procedures – not just parts – pair this catalog with the service manual. Manitou MHT10160 Operators/Service Manual gives you the torque specs and disassembly steps. For a complete set, also get Manitou MHT10160 Operator/Service Manual. If you work on other Manitou models, check K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages.

FAQ: Parts Catalog Questions

Is this manual specific to the MHT10160 model?

Yes. 512 pages dedicated to the MHT10160 M Series E2 (including the L variant).

Can I use this to order parts for other Manitou models?

No. This catalog is for the MHT10160 only. Using it for other models will give you wrong part numbers. For the MVT 1230L, see K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages.

What if a part number has been superseded?

The catalog includes updates through 11/06. Check with your Manitou dealer for any supersessions after that date. The part number on the page is the latest at the time of printing.

Do I need a separate service manual?

This is a parts catalog, not a repair manual. For torque specs, removal procedures, and diagnostics, you need the service manual. Get Manitou MHT10160 Operators/Service Manual to complement this parts catalog.

If you’re working on a MHT10160 and need the right part the first time, stop guessing and get the factory data. Access the Factory Manual today.