Description

K-D Manitou MVT 1230L, MVT1230LC Parts Catalog

If you’ve ever ordered a part for a K-D Manitou forklift and got the wrong one, you know the headache. That cylinder that doesn’t match the one on your machine. The brake pad that doesn’t line up. This catalog kills that guesswork. It’s the OEM parts catalog – 264 pages, factory-issued, with exploded diagrams and part numbers that match the build sheet.

I’ve been wrenching for 28 years. When a tech comes to me with a parts book that’s a photocopy of a copy, I send them back. You need the real thing. This is it. K-D Manitou MVT 1230L, MVT1230LC Parts Catalog from the original print run. Not a third-party recompile. Not a Chilton. You want the part number that goes on the bolt? It’s in here.

Brake Pedal and Circuit – Page 18

That brake pedal assembly isn’t just a lever. It’s a circuit with master cylinder, lines, and return springs. Page 18 gives you the exact item numbers for the MVT 1230L and MVT1230LC. If you’re rebuilding the brake system, you don’t guess which seal kit. You pull the page, match the illustration, and order the right part. The manual includes both brake pedal and circuit – covers the entire hydraulic linkage.

Six Cylinder Assembly Sections

This catalog breaks out every Cylinder on the machine – carriage tilting (section 23), compensation (22), leveling (24), lifting (19), telescopic primary (20), and telescopic secondary (21). That’s six separate sections. Each one shows the seal kit, rod, gland, and mounting hardware. Need the piston for the main lift cylinder? Go to section 19. The drawing shows the exact retaining ring. No guessing which snap ring groove.

Engine and Hydraulic Systems Coverage

From the fuel injection pump (section 66) to the hydrostatic transmission circuit (section 9), this manual covers the whole powertrain. You get the front axle reduction gear (43), rear axle differential (46), and the steering system (47). The hydraulic control valve (30) and boom circuits (11, 12) are broken into primary and secondary loops. If you’re tracking down a drift in the boom, the parts breakdown for the spools and springs is right there.

Other related manuals you might need: K-D MANITOU Parts Catalog R109 (1991) for older models, K-D Manitou K5705 Parts Catalog R48 2000 for the K-series, and K-D Manitou MVT 665 T Parts Catalog for a smaller MVT variant.

Who Needs This Catalog

If you’re a shop that services K-D Manitou telehandlers, you need this on the bench. Parts counter guys – you’ll use the numerical part number index in the appendix. Home-garage guys who bought a used MVT 1230L – this catalog keeps you from ordering the wrong master cylinder. The manual is 264 pages of exploded views and item-numbered lists. It’s not a repair manual with torque specs – it’s strictly parts identification. But without it, you’re flying blind.

Why OEM Documentation from K-D Manitou

Aftermarket parts catalogs? They combine models into one diagram and hope it fits. This is the factory catalog – the same one the K-D Manitou dealer uses. The serial number breaks are real. The casting numbers match. If you need to know whether the MVT1230LC uses a different lift cylinder than the MVT 1230L, the part numbers will tell you. I trust the OEM print because I’ve seen the damage from using a wrong seal. For a deeper look at what a proper Automotive Industry Overview expects from documentation, this catalog sets the benchmark. And if you’re curious about the engine internals, the Internal Combustion Engine chapter in a standard textbook won’t give you the part numbers – this catalog will.

4 Common Questions About This Parts Catalog

Does this include torque specs or repair procedures?

No, this is a parts catalog only. It shows exploded views, part numbers, and quantities. For repair procedures you need the service manual. This is for ordering the correct parts.

Can I use this for both the MVT 1230L and MVT1230LC?

Yes, the catalog covers both models. The TOC lists separate sections where differences exist. The brake circuit (page 18) is the same for both models. Always verify your serial number when ordering.

How do I find a part number quickly?

Use the alphabetical contents index at the front. It lists every system alphabetically with section numbers. Then flip to that section, find the item number on the illustration, and read the part number from the table on the facing page.

Is this a genuine K-D Manitou publication?

Yes, this is the original OEM PDF. The front page has the K-D Manitou logo, the 1-800 parts number, and the disclaimer about part illustrations. No aftermarket reproduction.

If you’re tired of ordering parts that don’t fit, stop guessing. You can have this catalog on your screen in minutes. Access the Factory Manual and get the part numbers that match your machine.