Description

Hangcha CPDS13, CPDS15, CPDS16, CPDS18, CPDS20JC1 Parts Catalog

If you’re digging through a forklift transmission or trying to match a steering cylinder seal, you need the exact part number. That’s where this Hangcha parts catalog earns its keep. Not a generic reprint — this is the factory-issued parts list for the Hangcha CPDS13, CPDS15, CPDS16, CPDS18, CPDS20JC1 J-series three-wheel electric forklifts. 96 pages of exploded-view drawings, OEM part numbers, and the kind of detail that saves you from ordering the wrong hydraulic valve and waiting another week.

I’ve had enough phone calls from guys who used an aftermarket schematic and ended up with a pump that didn’t fit. This catalog puts every figure in front of you: drive system, transmission gear box, steering axle, brake pedal assembly, electrical system, mast components. You get Chinese and English descriptions, model-specific callouts, and a separate optional parts section starting page 61. No guesswork.

Transmission Gear Box (I)(II)(III) — 3 Detailed Exploded Views

Figures 3, 4, and 5 of the catalog cover the transmission gear box for the JC1 models. Each view breaks down the internal gears, shafts, bearings, and seals. The part numbers are listed right next to the callout numbers. You won’t need to cross-reference a separate key. Page 4 shows the first breakdown, page 5 the second, page 6 the third. If you’re rebuilding a CPDS18 transmission, you pull the figure that matches your serial number prefix. No aftermarket guessing.

Does This Parts Catalog Cover the AC Controller Variants?

Yes. The catalog includes three separate controller figures: DC controller (Fig.24, page 49), AC controller for JD1 models (Fig.25, page 50), and AC controller for JC1 models (Fig.26, page 51). Each shows the controller board, wiring harness connectors, and mounting hardware. If you need to replace a MOSFET or a capacitor pack, the part number is there. But remember — this is a parts catalog, not a repair manual. You still need the service manual for removal and installation torque specs.

7 Major Systems Indexed in 96 Pages

The catalog is organized by figure number from 1 to 35. Systems covered: counterweight, drive system, transmission (3 views), steering axle (2 views), steering wheel and device, priority valve, overhead guard, chassis body (3 views), air breather, brake pedal assembly, acceleration pedal, parking brake, brake oil pipes, pump device and pump unit, control valve (3 views plus valve section breakdowns), steering and tilt oil pipes, electrical system (4 views), lamps (head, front, rear), meter panel, combination switch, controllers (DC and AC), battery box, lifting parts (duplex mast, 4 views), fork carriage, chain assembly, lifting cylinders, tilt cylinder, mast piping, and side shift. That’s a lot of ground for 96 pages.

Get the Correct Part Numbers Before You Order

Take the steering axle assembly (Fig.4, page 9). The exploded view shows the kingpin, bearings, tie rod ends, and steering cylinder. Each item has a number that corresponds to a row in the table. The table lists description, model applicability, and page number for the next level of detail. If you need the steering gear itself, Fig.7-A splits it into two pages (15 and 16). Don’t order a generic seal kit when you can pull the OEM number for the exact CPDS15 steering gear.

Steering, Brake, and Electrical: Factory Diagrams

Brake pedal assembly (Fig.13, page 25) shows the pedal, return spring, master cylinder pushrod, and mounting bracket. The brake oil pipe assembly (Fig.16, page 28) includes every tube, fitting, and clamp. Electrical system diagrams run from Fig.21-A to Fig.21-D (pages 40-43). If you’re chasing a short in the head lamp circuit, the wiring harness is drawn with connector shapes and wire colors. The factory diagram is the only one I trust when I’m tracing a 48V system.

For related manuals, check out the Hangcha J Series Forklift Parts Catalog Manual for more model coverage. The HANGCHA 12-16t IC Counterbalanced Forklift Parts Catalogue – Section: Lifting Sy covers larger trucks, and the Hangcha 5t-6t Side Forklift Parts Catalogue 3rd Edition – Section: Lifting Syste is useful if you work on sideloaders. For wider industry context, see Automotive Industry Overview and Internal Combustion Engine.

FAQ

Can I use this catalog for the CPDS20JC1?

Yes, the CPDS20JC1 is listed throughout the transmission and controller figures. The catalog covers all five models: CPDS13, CPDS15, CPDS16, CPDS18, and CPDS20JC1.

How do I match part numbers to my forklift’s serial number?

The catalog groups parts by figure number and model series. You need to identify your forklift’s series from the nameplate (CPDS13 through CPDS20JC1). Then locate the corresponding figure for the system you’re working on. Each part has an item number and description in Chinese and English. Cross-reference with your forklift’s existing part if possible. If you have the serial number, you can contact a Hangcha dealer to verify model-specific variations. The catalog includes an optional parts list starting page 61 that covers accessories like side shifters and additional hydraulics. Start by locating the figure that matches your system, then narrow down by the model column in the table. The exploding diagrams are drawn to scale, so you can visually confirm bolt patterns and housing shapes. That’s more reliable than matching by description alone — I’ve seen two similar pumps that look identical but have different port orientations. Use the figure number and the item number together, and you’ll get the right part.

Access the Factory Manual. This is the only parts catalog that matches the Hangcha factory build. If you’re ordering parts for a J-series three-wheeler, start here and save the headache of returns.