Falconlift TAZIO 15-30 Parts Catalog – 87 Pages of OEM Part Numbers

Description

You’re a tech who’s had to return a brake cylinder three times because the parts house gave you the wrong seal. That stops here. This Falconlift TAZIO 15, TAZIO 18, TAZIO 20, TAZIO 25, TAZIO 30 Parts Catalog is the 87-page factory document that shows you exactly which part number goes where. Every exploded diagram comes straight from Falconlift’s engineering files. No third-party reprints, no generic listings – just the same pages the dealer uses to order stock.

Falconlift TAZIO 15-30 Parts Catalog: What Each Section Covers

Getting the right part starts with knowing the section numbering. Falconlift splits the forklift into A-coded groups. A301 covers the differential and transmission assembly. A302 is the drive axle and wheel brake. A303 steers you through steering axle, cylinder, gear, and power steering. A305 dives into the car body and fitting system, including the engine hood and counterweight. Each group has its own page range, and the index on page 3 maps every assembly to an exploded view. You don’t need to flip through blindly – the table of contents shows exactly where each system lives.

Transmission, Differential, and Drive Axle Breakdown

Transmission assy lives on page 6. A301-2 lists every gear, shaft, and bearing in the gearbox. Page 7 gets into the transmission gear box itself. Oil pump is on page 9. If you’re rebuilding a differential, page 5 shows the A301-1 differential assy with all shims and bearings. The drive axle section – A302-1 on page 12 – includes the wheel brake assy on page 13 and tire assy on page 14. When I see a shop try to order a wheel cylinder without the parts catalog, they almost always get the wrong bore diameter. The manual’s drawing includes the item number and the quantity column. Match the number to the list, and you get the correct seal kit.

Brake and Steering Hydraulics – Exact Cylinder Seals

Every Brake component is cross-referenced from the pedal assy (page 26) to the master cylinder and lines in the brake system (page 27). The parking brake section on page 25 is separate – don’t confuse its parts with the service brake. For Steering, the steering Cylinder is on page 16, steering gear on page 17, and power steering on page 18. If your machine has a wandering wheel, you’ll be ordering a steering gear rebuild kit – but only if you have the correct part number from this catalog. The exploded views show the exact orientation of seals and O-rings. Aftermarket catalogs often combine several generations into one blurry diagram. Falconlift’s factory file keeps each variant separate.

Why Factory OEM Beats Aftermarket Parts Lists

Falconlift’s own introduction on page 2 states: “Be sure to use FalconLift genuine parts when purchasing or replacing parts. If non-genuine parts are used, forklift failure is not under our quality warranty.” That’s not marketing – that’s liability. When you order a Valve assembly from the electric control valve section (page 10) or the control valve assy (page 11), the number you get from this catalog matches the factory bin. Aftermarket cross-references often substitute a valve that fits but cracks at a different pressure. I’ve seen a shop blow a hydraulic line because they used a generic spool. Don’t be that shop. Stick with the OEM numbering from this 87-page index.

Use the Index to Find Part Numbers Fast

Flip to page 2 and you’ll see the instruction table: locate the item number in the illustration, then read across columns for new part number, old part number (if superseded), quantity, and applicable models. Each assembly page has a drawing with callouts. For example, the mast system two-stage starts on page 30. Need a tilt cylinder seal? That’s page 36 under A308-2. The lift cylinders for two/three stages are spread across pages 38–48 depending on left/right and container form. Don’t mix them up – the manual uses separate drawings for each configuration. Suppliers like FalconLift Achille 15-30 Spare Parts Catalogue and Massey-Harris-Ferguson FF 30 GS 1957 Parts Catalog | OEM Fastener Guide follow similar logic, but this Falconlift catalog is specific to the TAZIO chassis. For broader context on forklift drivetrain design, check Automotive Industry Overview and Internal Combustion Engine – but for part numbers, you need the factory file.

87 Pages of Genuine Part Numbers – No Reprints

Every page is an original scan from Falconlift’s spare parts catalogue. The cover says “TAZIO AND GIUSEPPE 15/18/20/25/30/35 SERIES.” That means this catalog covers the TAZIO 15, 18, 20, 25, and 30, plus the 35 variant. The PDF includes over 60 exploded views covering differential, transmission, drive axle, steering, body, mast, hydraulic lines, LPG bracket, and repair kits. Bolzoni sideshift attachment is listed on page 72. If you’re retrofitting a sideshift, that section gives you the mounting hardware part numbers. This is not a service manual – it won’t give you torque specs or removal steps – but it’s the only reliable way to order parts that actually fit. Pair it with the factory service manual for the full picture. For related OEM part listings, see Futura FC200-FC400 Parts Catalog – OEM Wear Parts Specs.

Does this catalog list engine internal parts?

No. This catalog covers chassis and drivetrain only – transmission, axle, brakes, steering, mast, hydraulics, and body. Engine internal parts are not included.

How do I cross-reference old part numbers?

The index on page 4 explains the table columns. You’ll see “Old Part NO.” and “New Part NO.” columns. If your part has an old number, find it in the list and use the new number for ordering. The manual includes a note that old versions are out of use, so always use the new number. This is critical because Falconlift updates parts without changing form. For example, a lift cylinder seal from two years ago may have a different number than the current production part. The cross-reference table on each assembly page shows both numbers. Note that some old numbers may still be in stock – the manual says to contrast old and new, but orders should always reference the new number. The quantity column also tells you if you need one or two per machine. This saves you from ordering a single seal when the system requires a pair.

Can I use this catalog for the TAZIO 35?

The cover says TAZIO and GIUSEPPE 15/18/20/25/30/35 series, so yes, it includes 35. The part number columns have separate columns for each model – you just check the column that matches your serial number.

Are torque specs included?

No. This is a parts catalog, not a service manual. You need the separate Falconlift service manual for torque values and repair procedures.

Don’t waste another day swapping wrong parts. Access the Factory Manual and get the exact part numbers Falconlift stamped on the drawings. Your brake system, transmission, and cylinders will thank you.