Description

Dynapac PL2000S Parts Catalog – Factory OEM Exploded Views and Part Numbers

If you’ve ever had a cold planer down because you ordered the wrong planetary gear or a seal that didn’t match the serial number, you know the cost of guessing. This Dynapac PL2000S Parts Catalog puts the factory parts breakdown in your hands — 158 pages of exploded views, part numbers, and assembly order. No third-party interpretation. No “compatible with” nonsense. You get the exact reference that Dynapac used to build the machine.

Main Frame – Hoods, Tank Protection, and Mounting Parts

The first section (PL2000S01_01_A_) breaks down the main frame into sub-assemblies: main frame part number 500-01200, hood front and tank protection 500-01210, accessories box and belt protection 500-01220, engine hood and foot room 500-01230. If you need to replace a damaged hood or a mounting bracket, the exploded view shows exactly which bolt goes where. The lift and tip-up mechanism (500-01260) is also here — critical if you’re doing engine access work.

Planer Unit – Cutting Drum, Side Shields, and Planetary Gear

Section PL2000S02_01_B_ is where the heavy cutting action lives. Cutting drum housing with side plates and spray system (500-02110), complete side shields (500-02120), and the tension lever for the cutting drum (500-02130B). The planetary gear (part number 951056556) is listed with its own sub-section. If you’re chasing down a vibration or a leak around the drum drive, you need this page to identify the correct bearing and seal kit. The catalog shows the gear assembly in an exploded view so you can order individual parts instead of a complete unit.

Drive System – Cooler, Air Filter, Fuel System

Under PL2000S06_01_D_, the drive section covers the drive unit (500-06110C), cooler (500-06120C), air filter and air intake (500-06132), plus the fuel system and exhaust mounting parts (500-06140). The fuel system diagram includes the tank, lines, and mounting brackets. If you’re retrofitting a new fuel filter or replacing a cracked coolant line, the part numbers here are the ones Dynapac stamped on the original components. Do not rely on a generic cross-reference — use this manual to pull the OEM number and order with confidence.

Hydraulic Equipment – Tanks, Steering, and Rotation Drives

Section PL2000S07_01_A_ is the biggest in the book. Hydraulic oil tank complete (500-07110), steering circuits 1 and 2 (500-07120 / 500-07130), drive hydraulics (500-07140), belt drive (500-07150), rotation drives (500-07160), optional fill pump (500-07161), and the aggregate with canopy (500-07170). Every hose, fitting, and pilot line is listed with its part number. When a steering cylinder starts leaking or a rotation motor loses power, you don’t waste time pulling the wrong seal kit. The exploded view shows the order of assembly — critical for getting the o-rings and backup rings in the correct sequence.

Electric Equipment – Operator Panels and Clamp Boxes

PL2000S08_01___ covers all electrical components: operating stand guide (500-08110), input module (500-08130), clamp boxes (500-08150 and 500-08160), switch box for cameras (500-08170), electric surveys 2 and 3 (500-08301 / 500-08302), and operator panels right and left (500-08200 / 500-08210). If a camera feed drops or a control panel button sticks, you can trace the wiring harness and connector part numbers. The clamp box diagrams also show terminal layouts, which helps when you’re troubleshooting a short without the factory wiring schematic.

Who Needs This Catalog – And Why It Saves You Money

You maintain a fleet of cold planers, or you own one PL2000S that you can’t afford to keep down for a week waiting for the wrong part. This catalog is for the guy who does his own rebuilds — the shop owner who knows that guessing on a planetary gear costs more than the manual. The exploded views let you point to the exact component on the phone with the parts counter. Combine this with the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer for related models. The Dynapac factory documentation is the only reliable source when you’re ordering seals, bearings, or hydraulic cartridges.

Source Authenticity – OEM vs. Aftermarket Parts Books

Every page in this catalog is scanned from the original Dynapac publication. No aftermarket transcription, no re-drawn line art. The part numbers match what’s stamped on the castings and plates. I’ve seen aftermarket catalogs that swap a metric hex bolt for a standard one because they “cross-referenced” wrong. That gets you a stripped thread and a $3,000 cooler removal. Stick with the factory file. The Automotive Industry Overview might teach you about production, but it won’t give you the part number for a cutting drum tension lever.

FAQ

Does this manual include torque specifications?

No. It’s a parts catalog, not a service manual. Torque specs are in the repair manual for this model.

How do I use the exploded views to order the right part?

Each exploded view has a callout number next to each component. The accompanying part list gives the Dynapac part number, description, and quantity. If you see a hydraulic hose assembly in the diagram, note the callout, then find that number in the list. Write down the part number exactly as printed — even one digit off will get you a non-fit. Cross-check with the serial number of your machine (the catalog asks for Engine Serial No. and Paver Type on the first page). This is especially important for sections like the rotation drives (500-07160) where there are multiple revisions based on build date.

You’ve got 158 pages of factory-accurate part information here. For related equipment, see the Dynapac PL2000S Parts Catalog – Section: Option Canopy for canopy, high-pressure cleaner, and water fill hose accessories. Also check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec if you work on the larger model. Stop guessing what part goes where. Access the Factory Manual.