Description

Dynapac PL2000S Parts Catalog – Factory Specs for Your Cold Planer

You’re on a job site, the cold planer drops a track motor, and you need a part number fast. If you’re digging through generic aftermarket charts, you’re wasting billable hours. That’s why the Dynapac PL2000S Parts Catalog exists. 157 pages of factory-issued exploded views, exact part numbers, and assembly breakdowns for the PL2000S cold planer. No photocopy guesswork. No blurry scans from a third-party site. This is the same document Dynapac technicians used to build the machine from the ground up.

157 Pages of Factory Parts Breakdown

Every page in this catalog is a direct scan of the original Dynapac spare parts catalogue for model 500.117, the PL2000S. You get the same table of contents that lists every assembly group, from the main frame down to the round shank bits. Page 5 of the document shows the machine identification block – serial number, engine serial number, delivery date – all the fields you need to match your specific unit. That data is critical when ordering parts for a machine that’s had field modifications over the years.

What Sections Does the Dynapac PL2000S Parts Catalog Cover?

Open the table of contents and you’ll find ten major sections. Engine components appear under the Drive section (500-06140 fuel system, exhaust system, mounting parts). The catalog also covers:

• Main frame assembly (500-01200 through 500-01260) – includes hood, tank protection, engine hood, foot room, lift and tip-up mechanism
• Planer unit (500-02110 to 500-02130B) – cutting drum housing, side plates, spray system, tension lever, planetary gear (part number 951056556)
• Material feeder (rigid) – sliding shoe, hoist/swivel unit, collating conveyor, conveyor
• Steering assembly (500-04110)
• Track group (500-05210)
• Drive – drive unit, cooler, air filter, fuel and exhaust system
• Hydraulic equipment – oil tank, steering 1 & 2, drive, belt drive, rotation drives, fill pump option, aggregate with canopy
• Electric equipment – operating stand, input, clamp boxes, switch box for cameras, electric surveys, operator panels
• Water system – cooling system
• Accessories – rear shank bite box, quick disconnect holders, round shank bits
• Options – canopy, GfK roof, high-pressure cleaner, water fill hose, fill pump, compressed-air plant, shank bit extender, pressure air hose

Main Frame, Planer Unit, and Material Feeder: Exploded Views

Each subsection includes exploded diagrams with callouts. For example, the planer unit section (PL2000S02_01_B_) shows the cutting drum housing along with side plates and the spray system. The tension lever for the cutting drum is detailed with its own planetary gear assembly – part number 951056556. If you need to rebuild that tension lever, you won’t find a better reference for the correct bearing and seal sizes. The material feeder section covers both the collating conveyor (two versions listed – 500-03130 and 500-03140) and the main conveyor. Having the exact part number for the sliding shoe (500-03110) means you order the right wear part without measuring old parts.

Track Group, Drive, and Hydraulic Equipment Parts

The track group is a single assembly (500-05210) but the drive section goes deeper. The drive unit (500-06110C), cooler (500-06120A), air filter intake (500-06132), and the fuel/exhaust mounting group are all separated. Hydraulic equipment covers seven subsystems: the oil tank, two steering circuits, drive, belt drive, rotation drives, fill pump option, and the aggregate with canopy. That’s a lot of hydraulics to order parts for without a catalog. The electrical equipment section includes clamp boxes, operator panels, and two electric surveys (500-08301 and 500-08302). If you’re troubleshooting a wiring issue, those survey diagrams are the only factory reference for wire colors and connector locations.

Source Authenticity: OEM Print Only

I’ve worked with enough aftermarket catalogs to know the difference. This is an original Dynapac document, scanned from the factory archive. Not a reprint where someone cropped out margins or lost resolution on the part numbers. The page headers clearly show the Dynapac GmbH logo, address in Wardenburg, Germany, and customer info fields. That kind of traceability matters when you’re ordering a $2,000 hydraulic pump and need to confirm the revision level. Compare that to the Automotive Industry Overview standards for documentation – OEM parts catalogs are the baseline. This is the baseline for your PL2000S.

Frequently Asked Questions

Is this a reprint or a photocopy?

It’s a direct factory PDF from Dynapac’s archive, not a reprint.

Does this catalog include torque specifications or repair procedures?

No, this is a parts catalog, not a service manual. It focuses on part numbers and exploded views for ordering replacement components. For torque specs, you need the service manual. However, having the correct part number prevents ordering the wrong cutting drum bearing or hydraulic filter, which saves you from a return shipping headache. The catalog lists each assembly down to the bolt, so you can cross-reference to the service manual if needed. It’s a companion document, not a substitute.

Can I use this catalog for a Dynapac PL2000LS model?

This catalog is specifically for the PL2000S (model 500.117). The PL2000LS is a different configuration with longer tracks and different frame components. You’ll want the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec or the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer for that machine.

What file format is the access?

It’s a high-resolution PDF, 157 pages, searchable by part number. You can print individual pages or use the bookmarks to jump to any section.

If you’re tired of cross-referencing blurry third-party diagrams and guessing at part numbers, this catalog puts the factory spec in your hands. Dynapac PL2000S Parts Catalog is the same document used by Dynapac dealers worldwide. Dynapac themselves would tell you to use the original parts book. Access the Factory Manual and stop wasting time on aftermarket junk.