Description

Dynapac CC 41 Parts Catalog – 242 Pages of Factory Parts Data

I’ve been torquing bolts since before most of you were born. When a CC 41 comes into my shop with a busted brake or a leaking hydraulic motor, I don’t reach for some aftermarket PDF that guesses at part numbers. I grab the Dynapac CC 41 Parts Catalog. 242 pages of factory drawings, exploded views, and genuine part references. No fluff. No reprints. This is the same binder the dealer techs used when this roller was new.

If you’re trying to rebuild a drum drive unit on a CC 41 and you’re using a third-party parts list, you’re wasting time and money. I’ve seen techs order the wrong brake assembly because they trusted a scan from a website that didn’t differentiate between Poclain, Prometheus, and Renondin drum drives. That mistake costs hours. This manual gives you the exact part numbers per build variant. Look at Group 2 DRUM: it lists separate exploded views for each drum coupling. Need the brake for a Prometheus drum drive? Page shows the brake component set with individual alphanumeric references. You don’t guess.

Engine Breakdown: Caterpillar D-3145 and D-3208

The manual splits Group 3 ENGINE into two distinct caterpillar engine families. That’s important because the fuel systems and air intake routing differ. The Parts Catalog gives you separate sections for each engine – fuel system pages for D-3145 and D-3208, the hydraulic pump gearing, and the air filter assembly. You get the OEM part numbers for injector lines, filters, and gaskets. No cross-reference guessing.

Brake Systems: Poclain, Prometheus, Renondin

Group 2 handles all brake variants. The catalog shows the disc brake assembly under Group 7 DRIVERS PLATFORM as well, but the primary brake components live under the drum drive groups. For Prometheus: pages identify the brake housing, friction discs, springs, and seals. For Renondin: same level of detail. If you’re rebuilding a brake on a CC 41 and you order the wrong seal kit because you didn’t know which drum drive you had, you lose a day. This manual tells you exactly which parts belong to which variant.

242 Pages – What’s Actually Inside

Seven main groups cover everything from the frame to the hydraulic system. Group 1 FRAME includes front and rear frames, steering link, water tanks, sprinklers, scrapers. Group 5 HYDRAULIC SYSTEM spans hydraulic diagrams, propulsion systems (Poclain vs Prometheus/Renondin), charge pump, steering cylinders, brake hydraulic lines. Group 6 ELECTRICAL EQUIPMENT lists battery and wiring harness components. Group 7 DRIVERS PLATFORM details instruments, controls, brake controls, console, cab ROPS, heater. Every page has a picture number and part reference. You get the factory numbering system so you can order directly from Dynapac.

Related manuals you might need: the Dynapac CC 41 Spare Parts Catalogue – Section: Group 6 Electrical Equipment for a deeper dive into the electrical side. Also check the Dynapac CC 41 1982 Technical Manual – OEM Factory Specs if you want service procedures. For a different machine, the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec covers a larger roller family.

Why an OEM Parts Catalog Beats Aftermarket

Aftermarket parts catalogs often merge drawings from different model years or skip hardware like snap rings and seals. This one is printed by Dynapac Heavy Equipment AB. The title page says “We reserve the right to change specifications without notice” – that’s factory talk. The catalog covers CC 41 with Caterpillar D3145 and D3208 engines. It includes reference numbers for each item, and the issue number S-10059-4 tells you it’s the fourth revision. That means updates over earlier versions. You’re not getting a first-draft scan.

I’ve seen guys try to use a generic parts list for a CC 41 and end up with a wrong charge pump because they didn’t have the group breakdown. The catalog groups hydraulic system components by function: propulsion, vibration, steering, brake. Each has its own section with illustrated hydraulic motors and valve blocks. For the brake hydraulic system, there’s a dedicated subsection. You get the exact part numbers for the wheel tube, steering unit, and brake control valves.

Does This Manual Include Torque Specs?

No. This is a parts catalog, not a service manual. It identifies components and their part numbers. For torque values and assembly procedures, you need the factory technical manual. But for ordering the right brake disc or hydraulic pump seal, this catalog is unbeatable. Pair it with the Automotive Industry Overview for background on OEM documentation standards. For official Dynapac info, visit Dynapac website.

Who Needs This Parts Catalog?

Anyone maintaining a CC 42 (CC 41) vibratory roller. Fleet mechanics, rental yard technicians, independent repair shops, and serious DIY owners. If you’ve got a CC 41 with a Caterpillar engine and you need to identify a hydraulic motor part number for a Prometheus drive, this is your reference. Beginners will appreciate that each part has a clear illustration and a reference number that matches the factory computer system. Professionals will value the speed of finding the right brake or engine component without cross-referencing multiple sources.

FAQ

Does this cover the electrical system?

Yes. Group 6 lists battery, wiring, and electrical equipment parts. But it’s a parts catalog – no wiring diagrams. For that you need the technical manual.

What if I have a CC 41 built after 1985 with a different drum drive?

The catalog includes three drum drive variants: Poclain, Prometheus, and Renondin. As long as your CC 41 uses one of those, the part numbers apply. The manual’s issue S-10059-4 likely covers the production range through the late 1980s. If your machine has a serial number outside the range, verify with a dealer. But for 90% of CC 41s, this catalog gives you the correct references.

Stop chasing wrong part numbers. Get the factory data that saves you return trips to the parts counter. Access the Factory Manual for the Dynapac CC 41 Parts Catalog today.