Description

Dynapac LF130 Parts Catalog – What You Need to Order the Right Part

I’ve lost count of how many times a tech has ordered a part blind—only to find it’s the wrong revision or doesn’t fit because they skipped the serial number check. That’s wasted money and downtime. The Dynapac LF130 Parts Catalog (80 pages) is the paper you need on the bench before you pick up the phone to call a dealer. This isn’t a generic list; it’s the OEM document Dynapac itself uses to identify every nut, bolt, and seal on the LF130 forward vibratory plate compactor.

Ordering Spare Parts: The 6 Data Points You Must Provide

Page 4 of the catalog spells it out: machine type, serial number, quantity, part number, denomination, and dimensions if ordering by length. Miss one of those—especially the serial number—and you’ll get a part that doesn’t match your machine’s build. I’ve seen guys assume all LF130s are identical. They’re not. The catalog clearly states “Valid from serial number” and lists three engine options: Honda GX160, Robin EX17, and Hatz 1B20. You need to know which one your machine has.

Engine Variants Covered: Honda, Robin, and Hatz

Each engine type changes the mounting hardware, the exhaust, even the vibration isolation mounts. The catalog breaks down the parts for each engine in separate sections. If you’re swapping a Robin for a Honda, you’ll need more than just a long block—the fastener diagrams on the relevant pages tell you exactly what brackets and spacers change. Don’t guess; use the OEM drawing.

Parts Catalog Organization: Exploded Views and Group Numbers

The manual organizes contents into groups—look at page 5 for the structure. Each group covers a system: engine, base plate, exciter, handle, etc. Under each group you get an exploded view with callouts and a parts list. This is how you confirm the part you think you need is actually the right item. I’ve had a flat rate tech order a complete handle assembly when all he needed was the rubber grip—the exploded view would have shown him that the grip is a separate part number.

Serial Number Validity and Catalogue Issues

The catalog you’re buying is the SLF130-1EN2 edition, dated 2009-04, replacing the earlier 2008-12 release. If your machine was built after serial number 27600001, this catalog covers it. Earlier machines might need the previous edition. Check the serial number plate on your LF130 before ordering. I’ve seen shops buy a catalog and then complain that a part doesn’t match—turns out they had a 2007 build. The manual can’t fix that, but it tells you exactly where your machine fits.

Why an OEM Parts Catalog Beats Aftermarket Lists

Aftermarket parts listings are often compiled from old revisions or copied from general diagrams. This 80-page PDF comes straight from Dynapac (part of Atlas Copco). Every part number is verified against the factory drawings. If you’re working on construction equipment and need to be sure the vibration damper matches the original, this is the only source you should trust. Automotive Industry Overview standards don’t apply here; this is heavy machinery with its own specs.

If you also work on larger Dynapac cold planers, check the related manuals: Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec, Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer, and Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings.

Does this parts catalog include torque values or repair procedures?

No. This is a spare parts catalog only. It shows exploded views, part numbers, and ordering info. For repair procedures and torque specs, you need the separate service manual.

How do I ensure I order the correct part when there are multiple subgroups?

Write down the serial number from your machine’s data plate, then open the catalog to the group that matches the system you’re working on (e.g., “Engine” or “Vibration”). Find the exploded diagram, note the item number, and cross-reference it with the part list on the same page. The part number includes a prefix that corresponds to the engine type—double-check that prefix matches your machine’s engine. If the catalog lists two different part numbers for the same visual item, one is for Honda, one for Robin. Your serial number tells you which engine was installed at the factory. Match the catalog engine variant to your machine. Call your dealer with the part number, not just the item description.

When you’ve got an LF130 on the shop floor and the customer needs it back by end of week, you can’t afford to wait for a wrong part to ship back. Access the Factory Manual and get the right part number the first time.