Description

TCM FG20C13, FG25C13, FD20C13, FD25C13 Parts Catalog

If you’ve ever ordered the wrong hydraulic fitting or bracket for a forklift attachment because the aftermarket cross-reference flagged the wrong part number, you know the waste. Machine down, customer waiting, your billable hour shot. The only fix is factory documentation. This TCM FG20C13, FG25C13, FD20C13, FD25C13 Parts Catalog runs 623 pages of OEM-sourced part numbers, illustrations, and assembly breakdowns for attachments that bolt onto those specific forklift models. I’ve been turning wrenches since 1995, and I will not trust a third-party parts list for anything that moves under load.

Attachment Breakdown: Side Shift and Load Stabilizer Coverage

The catalog doesn’t waste space on generic theory. It dives straight into the attachment families used on the FG20C13, FG25C13, FD20C13, and FD25C13 chassis. Side shift units (SS22E, SS23E, SS25C, SS26C, SS27C, SS29A0) get their own illustrated parts lists. Load stabilizers with side shift (SS22A, SS28A, SS2CA, SS2DA, plus the SSS series) are broken down to the bolt level. You get factory figures (FIG. numbers) that match the physical assembly on the machine. Fork shift models (FS20B, FS22B, FS23B, FS2A1, FS2B1, FS2C1, FS2D1, FSM20B) and hinged fork units (HF24B, HF21B, HF22B, HF23B) are all included. Need the part number for a load grab side-shift cylinder seal kit? It’s in the LGS2A7 through LGS2H7 section.

Each attachment group lists every nut, bushing, and hose in exploded-view format. The FIG. number cross-references to the parts list table with the OEM part number, description, and quantity. No surprises. No creative interpretation.

Why a Parts Catalog, Not a Service Manual?

Some guys grab a service manual when they need a part number. That works if you want to sift through torque sequences and fluid capacities to find a single bolt. This document is the opposite: it is a dedicated Parts Catalog built for ordering. Every single page serves one purpose – telling you the exact part number for the component you need, where it goes, and how many you get in the assembly. Service manuals tell you how to take it apart. This tells you what to order before you tear down.

For a shop that runs multiple TCM forklifts with attachment swaps, you will use this catalog every week. Check the mounting brackets for a rotating fork clamp (RFL2A7–RFL2H7) or the hydraulic line routing for a drum clamp (DLG214). The catalog covers those. It also includes the ATT PIPING section (AP021L, AP121L, AP221L) so you can match the hydraulic hose assemblies to the correct fittings.

623 Pages of Factory Part Numbers

Page count matters when you need to cover 18 different attachment families plus the base machine compatibility list. This catalog weighs in at 623 pages. That is not filler. That is every variant of side shift, load stabilizer, fork shift, hinged fork, extension fork, load grab, load grab with side shift, fork clamp, drum clamp, block clamp, turret fork clamp, carton clamp, rotating clamp, rotating fork, rotating load grab, rotating fork clamp, rotating drum clamp, rotating device, fork extension sleeve, scoop, ram, grain arms, hook, and ATT piping. The index at the front lets you jump to the right FIG. number in seconds. Section markers are clear.

Torque specs and fluid capacities are not in this document – it is a parts catalog. If you need assembly torque values, get the corresponding service manual. But for ordering the correct seal kit or hydraulic line, nothing beats the 623-page factory source.

How to Use This Parts Catalog Correctly

Open the front cover. You’ll see a Japanese and English intro. The “How to Use” section explains the FIG. number system. You find the attachment name in the contents, locate the FIG. number, then scan the illustration to identify the component. Note the item number, then go to the parts list table for that FIG. to grab the part number and machine serial number range. Always verify the serial number (machine number) on the name plate before ordering. The catalog has a warning in all caps: “We cannot guarantee any loss or trouble attributable to other parts than ours.” That is TCM telling you not to substitute. Listen to them.

Abbreviations are listed: ASSY means assembly, RH is right side facing forward, LH is left, AR means as required, * marks set/kit parts, # marks parts not sold individually. Know these before you flip pages.

Who Needs This Catalog?

If you own or service a TCM forklift in the FG20C13, FG25C13, FD20C13, or FD25C13 line – with any attachment from side shift to rotating drum clamp – you need this. Parts managers at dealerships, fleet maintenance supervisors, independent lift truck techs, and serious DIY machine owners. If you are a home garage guy fixing a single forklift, this catalog will save you from ordering the wrong $200 hydraulic cylinder. The investment pays for itself on the first correct order.

For related factory manuals, check out the TCM FG20C13, FG20W3, FD25Xx, FG20C1, FG20T3 Parts Catalog – 592 Pages if your machine falls outside the specified models. Another option is the TCM FD60Z8 FD70Z8 FD80Z8 FD100Z8 Parts Catalog – 650 Pages for larger capacity forklifts. For engine-specific parts on Isuzu-powered TCMs, the TCM Isuzu-4218A-E Parts Catalog – 478 Pages OEM Factory Manual matches the same attachment hardware.

Context on the broader industry: Automotive Industry Overview and the general Internal Combustion Engine design principles apply here, but for forklift attachments, the TCM catalog is your one source of truth.

Source Authenticity: OEM Print

This is not a reprint of a reprint. It is scanned directly from the TCM Corporation-issued parts catalogue. The OCR excerpt shows the original Japanese and English text, including the factory introduction and ordering instructions. No aftermarket editor has redrawn the exploded views or consolidated part numbers. What you see is what TCM published for their dealers. If you have ever tried to order a part from a generic manual that showed a wrong illustration, you understand why authenticity matters. This document carries the TCM logo and part numbering system – the same one dealers use to place orders.

Frequently Asked Questions

Does this catalog include part numbers for the base forklift chassis, not just attachments?

No. This is an attachment-specific parts catalog. It covers side shifts, clamps, grabs, forks, and all the add-on equipment listed in the front matter. For chassis parts (engine, transmission, mast, counterweight), you need the base machine parts catalog.

Can I use this catalog to find the correct hydraulic seal kit for a Load Grab LGS2A7?

Yes. The LGS2A7 section lists every seal, O-ring, and wiper in the cylinder assemblies by part number. Match the FIG. number and item number to the illustration. Cross-check the serial number range of your machine before ordering.

Is this document in English?

Bilingual. The introduction, how-to-use instructions, and table headers appear in both English and Japanese. Part descriptions and part numbers are numeric or alphanumeric – language independent. The illustrations are universal.

Why 623 pages for attachments? That seems excessive.

Excessive? No. The catalog covers 18 distinct attachment families, each with multiple model variants. Every variant gets its own exploded view and parts list. Add the ATT PIPING sections for hydraulic line routing on each chassis model, and the page count makes sense. You want a manual that omits a variant so you have to guess? That wastes time. 623 pages means every attachment variant TCM offered for these forklifts is documented.

Stop ordering parts blind. Get the factory part numbers off your workbench instead of hoping the aftermarket catalog is right. Access the Factory Manual and keep a copy at your parts counter or in your toolbox. Your future self – and your service manager – will thank you.