Description

Still R50-10, R50-12, R50-15, R50-16 2016 Parts Catalog – The Only Source You Need for Genuine Part Numbers

If you’re turning wrenches on any of these four Still electric forklifts – R50-10, R50-12, R50-15, R50-16 – you’ve already learned that aftermarket parts catalogs are garbage. Part numbers are wrong, drawings are blurred, and the little details like counterweight variations for Bundesbahn or DaimlerChrysler builds? Forget it. This 1,641-page factory PDF from 2016 gives you the exact part numbers Still stamped into the steel. No guesswork, no wasted trips to the dealer counter.

That’s why I spec this manual on my bench. You get the original STILL Electronic Documentation System layout – every figure, every spare parts list, every remark about validity periods. If you need a wheel cylinder for the left-side running axle on an R5041, the part number is right there on page 2 of the TOC under RUNNING AXLE. You don’t have to hunt through generic cross-references.

Frame and Counterweight Variations

The frame section alone covers 20+ configurations. R5041 series, R5042-44 series, Bundesbahn, DaimlerChrysler with skirting board, even a VW build. Counterweights range from standard series to Komatsu spec, with specific 1.6-ton versions for superelastic tires (200/50-10). The manual lists each one by part number, weight, and mounting holes. If you bolt on a wrong counterweight the truck handles like a shopping cart with a flat tire – this PDF stops that.

Running Axle and Brake Parts

Axle assemblies break down left and right for R5041 and R5042-44 plus R5051-55. Brake parts, wheel cylinders, even the little return springs – everything has a Still part number. I’ve seen techs try to match aftermarket cylinders by eyeball. That ends in leaks and rework. Use the factory diagram and order the exact stamped cylinder. Page 2 of the electrical installation section also covers the travel sender setups tied to floorplate variants (with or without horn push, two-pedal control).

Why This Parts Catalog Over Aftermarket Sources?

Aftermarket catalogs copy from old reprints and often screw up the revision dates. Still released this in August 2016 – the date on every page is 03.08.2016. That means all supersessions and validity notes up to that date are baked in. When the manual says FRAME R5044; VW, it means that specific frame only fits the VW-badged build. Aftermarket books lump them all together and you get the wrong bracket. You don’t have time for returns.

Related manuals you might need: STILL RC 40-16/18/20 Forklift Spare Parts Catalog for smaller electrics, or for bigger lifts check the Still R70-16T, R70-18T, R70-20T 2016 Parts Catalog – OEM. The R60 family shares some running axle parts – see STILL R60-35/40/45/50 Electric Fork Truck Parts Catalog.

Does It Cover All Four Models?

Yes. The title page lists R50-10, R50-12, R50-15, R50-16. Inside the TOC, every section shows a validity column that tells you which models a part fits. Some components are shared across all four; others are specific to, say, the R50-10 with superelastic tires. You won’t accidentally buy a mast bearing meant for the heavier R50-16. The manual even breaks down accessories like overhead guard variants (Macrolon cover with/without flap, 100 mm higher than standard, etc.).

3 Key Sections You Will Use Repeatedly

MAST – complete breakdowns for each lift height and tilt cylinder (NEIGZYLINDER). ELECTR. INSTALLATION – wiring harness diagrams and fuse/relay locations. FORK – fork dimensions and part numbers for each capacity. If you’re swapping forks or rebuilding a mast, you need this. The alternative is disassembling, measuring, calling the dealer, waiting – that costs five times the price of this PDF.

Masts, Forks, and Hydraulics

The MAST BEARING, ATTACHMENT, and HYDRAULIC SYSTEM sections cover every valve, hose, and cylinder. For general forklift operations, an Automotive Industry Overview might give you background, but for the actual bolts and O-rings, use the factory book. Still even includes add-on hydraulics and single-lever operation panel configurations – the exact part numbers for levers, cables, and brackets. If you are curious about how the electric motor interfaces with the drive, the Internal Combustion Engine link doesn’t apply – but the ELECTRIC MOTOR SYSTEM chapter does.

FAQ

Is this a repair manual or just parts?

Parts catalog only – no torque specs or removal steps.

Can I use this to identify parts for a R50-14?

No. The manual explicitly covers R50-10, R50-12, R50-15, and R50-16 only. The R50-14 is not listed in any frame or axle variant. Trying to force fit parts from a different model can cause hydraulic mismatches or brake failure. If you have an R50-14, you need the corresponding factory catalog – do not guess from adjacent models because the mast tilt geometry often changes between capacity ratings.

You’ve got enough headaches keeping electric forklifts running. Stop chasing part numbers through three different web forms. Access the Factory Manual, get the exact Still part numbers, and get the job done.