Description

Manitou MT 5519 Parts Catalog

Manitou MT 5519 Parts Catalog is what you need when a boom cylinder seal blows or a hydraulic hose splits and you’re staring at a parts diagram that doesn’t match your machine. I’ve seen guys order three sets of gaskets before they get one that fits. That’s time and money down the drain. This factory catalog—174 pages of OEM part numbers, exploded views, and serial number breaks—puts an end to that. It’s the same binder the dealer parts counter uses, minus the markup.

What This 174-Page Parts Catalog Actually Covers

The catalog is built around the MT 5519 telescopic handler starting with serial number 25141. It covers the whole machine: from filters and belts to decals, hydraulic components, cab interior, drivetrain, and everything in between. The table of contents is straightforward—no fluff. You get sections like “Filters and Belts” and “Decals” right up front, then a Numerical Index and Subject Index so you can cross-reference part numbers. If you’ve ever tried to match a part using a blurry photo from the internet, you know how valuable that index is.

Filters, Belts, and Decals: Where the Catalog Saves Time

Turn to the “Filters and Belts” section and you’ll find the exact OEM part numbers for oil filters, fuel filters, air filters, and belt part numbers specific to the MT 5519. No guessing, no cross-referencing aftermarket charts that may be wrong. The decal section (page 18 references interior cab options, and the warning decal is on page 126) shows every label location and its part number. Missing a safety decal? You can order the correct one by number, not by description. That matters when a safety inspector walks through or when you need to sell a machine that’s compliant without having to hunt down a dealer who won’t call you back.

3 Reasons You Need a Factory Parts Catalog

First, the serial number breaks. The catalog shows precisely which parts apply to which serial number range—(SN 999 and before), (SN 1000 – 2000), (SN 999 and up). You can’t get that from aftermarket sources. Second, genuine Manitou part numbers. Using non-OEM parts on a telehandler can cause hydraulic system failures. Third, the hydraulic and electrical schematics are referenced to the operator’s and service manuals—meaning this catalog tells you exactly which manual to grab for schematics.

Order Parts Correctly: The Serial Number Rule

The introduction spells it out: “When ordering service parts, specify the correct part number, full description, quantity required, the machine model number, and serial number.” I’ve seen too many orders fail because someone skipped the last five digits of the serial number. The catalog uses icons to indicate seal kits, repair kits, and port designations. Miss those and you’ll get a part that doesn’t fit.

The Decal Section: Not Just Stickers

Decals include warnings, operation labels, and identification plates. Losing a decal might seem minor, but a missing “Warning – High Pressure” sticker is a liability. This catalog gives you the exact decal number and location. On page 126, you’ll find the warning decal. Don’t skip that section.

What This Manual Doesn’t Tell You (And Why That Matters)

This is a parts catalog, not a service manual. It won’t walk you through removing the cylinder or bleeding the system. For that, you need the Operator’s Manual (P/N 50960067) and the Engine Parts Manual (P/N 50960075). But without this catalog, you’ll be guessing which seal kit to buy. For background on diesel engines, see this Wikipedia article on diesel engines. If you want to understand the engine internals better, check this Wikipedia article on diesel engines.

Related manuals: MANITOU MT 5519 Parts Catalog, K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages, K-D Manitou K5705, K5797, K5755, K1479, K1787 1991 Parts Catalog.

Get the part number right the first time. Access the Factory Manual and stop ordering wrong parts.

Can I use this catalog to find torque specs?

No. This catalog is for parts identification only. Torque specs are in the service manual.

What serial numbers does this cover?

Beginning with S/N 25141 for the Manitou MT 5519. The catalog includes serial number breaks for different component revisions.

Does this include wiring diagrams?

Hydraulic and electrical schematics are not printed in this catalog. They are referenced to the Operator’s and Service Manuals. You need those manuals to see the full schematic drawings. The parts catalog tells you which manual to use for each system. If you are troubleshooting a no-spool issue, you will need the service manual, not this catalog. But without this catalog, you cannot order the correct replacement valve or seal kit. So both are necessary. The catalog’s index and serial number breaks ensure you get the exact part for your machine’s production run. Without the correct part, even a perfect wiring diagram won’t help you fix a cracked housing.

How do I know if a part is still available?

The catalog lists part numbers but does not indicate availability. Contact your Manitou dealer with the part number and serial number to check stock.