Description

Manitou MT 1030 2006 Parts Catalog

If you’re working on a Manitou MT 1030 2006 Parts Catalog, you already know one wrong part number can put a machine down for a week. This is the genuine factory catalog – 486 pages, published August 2006, covering the MT 1030 ST Série 2-E2. I’ve seen aftermarket catalogs that list a hydraulic filter that doesn’t even thread onto the housing. That doesn’t happen with this document. It’s the same exploded diagram set the dealer pulls up on his terminal.

Manitou MT 1030 2006 Parts Catalog: What You Get

This isn’t a service manual. It’s a parts catalog – which means every component is broken down into numbered diagrams with corresponding part numbers. Need the air filter cartridge? The security filter? The fan belt? They’re all in here. The OCR data shows items like “CARTOUCHE FILTRE A AIR” (air filter cartridge), “FILTRE A HUILE MOTEUR” (engine oil filter), and “COURROIE D’ALTERNATEUR” (alternator belt). Each item has a reference number tied to a diagram. You point, you order, you install. No cross-referencing a third-party website that may be wrong.

Filter and Belt Components Covered

Hydraulic oil filter cartridge, transmission oil filter, fuel filter – they’re all listed with part numbers. The catalog includes the cyclonic pre-filter, the hydraulic return oil filter cartridge, and the hydraulic pressure oil filter cartridge. For the belts, you get the alternator belt and fan belt with the correct length and profile. I’ve seen techs waste an hour trying to match a belt by eye. Use the part number from page 2 of this catalog. It’s stamped on the belt or you can look it up directly. For more service data, check out Manitou MT 1030, MT 732, MT 932, MT 728, MT 928 2010 Manual – that one has torque specs and procedures.

Why Aftermarket Parts Catalogs Fall Short

Aftermarket parts catalogs often combine models from different years or skip minor revisions. This catalog is specific to the 2006 Manitou MT 1030 with the ST Série 2-E2 designation. The tire sizes listed – DUNLOP 440/80-24 T37 158B TL and BF GOODRICH 400/80-24 156A8 TL – match exactly to the rim and load rating for this machine. If you’re working on a different series, look for K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages or K-D Manitou K5705, K5797, K5755, K1479, K1787 1991 Parts Catalog. Those are different machines, different parts.

Find the Hydraulic Return Oil Filter Cartridge

One of the most common failures on the MT 1030 is the hydraulic return oil filter cartridge. The catalog shows it clearly – the part number is listed alongside the pressure filter and the strainer for the principal circuit. If you’re replacing filters, do all of them at once. The engine oil filter, transmission filter, and fuel filter are all on the same diagram page. That way you don’t mix a return filter with a pressure filter. For reference, this Wikipedia article on diesel engines covers general maintenance intervals, but the part numbers come from this catalog.

Multilingual and Interactive: How to Navigate

The catalog is in five languages – French, German, Spanish, English, Italian. The English column is clearly labeled. The diagrams are numbered, so even if you don’t speak French, you can find the correct part by matching the number. This is a digital copy, so you can zoom in on the drawings. If you need more background on diesel engine fundamentals, read this Wikipedia article on diesel engines. For the Manitou, this catalog is your parts bible.

Frequently Asked Questions

Does this catalog include torque specifications?

No. This is a parts catalog, not a service manual. Torque specs are in the repair manual.

Can I use this for the MT 1030 ST Série 2-E2?

Yes. That exact variant is covered. Check the serial number range on the first page to confirm.

What languages are the part descriptions in?

The catalog features part descriptions in five languages – French, German, Spanish, English, and Italian. This is typical of Manitou’s European distribution, but the English column is clearly marked. You can identify the correct part without guessing the translation because the exploded diagram numbers are universal. If you’re a shop with Spanish-speaking techs, the Spanish column is right there. The catalog was first published in August 2006, so the part numbers reflect that era.

Is this a reprint or an authentic factory document?

This is a direct digital copy of the original factory catalog from Manitou. No third-party compilation. The part numbers listed are the ones used at the assembly line.

When you need to order the correct hydraulic return oil filter cartridge for your MT 1030, you want the part number that matches the machine. That’s what this catalog gives you. Access the Factory Manual and keep it on your tablet next to the lift.