Description

Manitou M 26-2, M 26-4, M 30-2, M 30-4, M 40-2 2012 Parts Catalog

Look, I’ve been wrenching for 28 years, and nothing burns my ass like ordering a part by eyeballing a blurry aftermarket diagram. You end up with the wrong seal, the wrong bearing, and 40 minutes of wasted labor. This Manitou M 26-2, M 26-4, M 30-2, M 30-4, M 40-2 2012 Parts Catalog from Manitou Americas gives you 574 pages of factory exploded views and part numbers. No guessing. No cross-referencing three different sources. You get the exact OEM number for every component on those machines.

Engine and Motor Components (PG_MOTEUR)

The PG_MOTEUR section breaks down the ST3B engine into every nut, bolt, and gasket. You’ll find separate listings for the M 26-2 and M 40-2 blocks, cylinder heads, fuel injection, and cooling systems. Each page groups parts by function with quantity and reference numbers. Need a water pump for a 2012 M 30-4? Flip to the appropriate APxxxx page and match your serial number prefix. This is the same data Manitou uses on their own assembly line.

Transmission and Gearbox (PG_BOITE) Parts

Two separate transmission sections – PG_BOITE_264389 and PG_BOITE_264390 – cover the gearbox and torque converter assemblies. The catalog lists internal components like clutch plates, bearings, and seals with part numbers that cross directly to the OEM bin. If you’ve ever ordered a “universal” transmission seal for a M 26-4 and ended up with a leak, you’ll appreciate having the factory specification right there on the page.

Driveshaft and Axle Assembly Diagrams

Front and rear axle assemblies are covered in PDG_ESSIEU_AV and PG_ESSIEU_AR sections. These pages show every spindle, hub, brake component, and differential part in exploded view. The catalog includes both standard and optional configurations, so you can verify whether your machine has the heavy-duty axle before ordering. I’ve used this section to track down a wheel stud for a M 40-2 that no parts store could identify – the answer was in the AX series drawings.

Hydraulic System: Cylinders, Hoses, and Fittings

Hydraulic diagrams cover the steering, boom, and auxiliary circuits. The illustrations show routing and orientation of hoses, plus the exact seals for each cylinder. When a M 30-2 lift cylinder started weeping, I found the correct seal kit under 9AA664_Modified. Without this catalog, I would have had to disassemble the cylinder, measure the old seals, and hope the aftermarket kit matched. That’s lost time.

Index Pages: Your Starting Point

Begin with the Index Pages at the front. They list every part number in alphanumeric order with page references. Find your part number (e.g., AP3245, BP203) and the catalog tells you which assembly page to open. This is how a professional parts department works – you don’t flip through 574 pages blind. Use the index, save yourself an afternoon of head-scratching.

Who Needs This Catalog?

If you own a Manitou telehandler from the M 26-2 through M 40-2 range (2012 model year), this is your parts bible. Home garage enthusiasts who maintain their own fleet will save hours of phone calls to dealers. Even professional shops that see multiple Manitou models need this on the shelf – a $28.95 service fee to look up a part number is stupid when you can own the factory reference for less than that. For those working on diesel engines, check out this Wikipedia article on diesel engines for general background, but get the actual part numbers from this catalog.

Why OEM Documentation Beats Aftermarket

Aftermarket parts catalogs often use generic drawings or skip revisions. This one is a direct scan of the 2012 Manitou OEM release, including updates through 12/2013. The page count is 574, the file name is MANITOU_M_26-2-M_26-4-M_30-2-M_30-4-M_40-2_2012_Parts_Catalog_fr-de-es-en-23814006098.pdf. Every illustration is labeled with the exact part number and quantity. I trust aftermarket documentation about as far as I can throw a torque wrench – don’t risk it. If you want to understand diesel engine basics, this Wikipedia article on diesel engines can fill you in on theory, but for real parts ordering you need the factory book.

Related manuals you might need for your shop:

• Manitou M26/M30/M40/M50 Parts Catalog 2014
• K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages
• K-D Manitou K5705, K5797, K5755, K1479, K1787 1991 Parts Catalog

Frequently Asked Questions

Can I use this catalog for the M 50-2 models?

Yes, the catalog lists M 50-2/4 ST3B on the cover and includes parts for those machines.

How do I find a part number if I only have the machine serial number?

Start with the Index Pages at the front. The catalog includes a comprehensive index of part numbers and a breakdown by component groups. Locate your serial number range to identify which revision your machine falls under, then go to the appropriate section (e.g., PG_MOTEUR for the engine, PDG_ESSIEU_AV for the front axle). Each assembly page has a ‘See plate’ reference that matches the diagram to your specific model. This is the same method used by Manitou dealers – it’s fast and eliminates guesswork.

If you’re tired of chasing wrong parts and burning billable hours, this is the tool that stops the waste. Access the Factory Manual now and keep it on your workbench or tablet. One lookup and you’ll wonder how you got by without it.