Description

K-D Manitou K5705, K5797, K5755, K1479 Parts Catalog

You are rebuilding a mast on a K-D Manitou forklift and you need the right part number. This 45-page OEM K-D Manitou K5705, K5797, K5755, K1479 Parts Catalog is what you want on the bench — not some aftermarket reprint that guesses at the seal kit or the chain pitch. The catalog came from the factory in Waco, Texas, and every illustration matches what K-D Manitou shipped. If you have ordered mast parts before and got the wrong cylinder because you gave a model number without the serial, you already know why this document matters.

Forty-five pages of exploded diagrams tied directly to part numbers. No generic cross-references. Each assembly — from the mast rail to the internal hose kit — is broken out by item number, description, quantity, and compatible model. The manual even leaves blanks for you to write down your mast model and serial number, because K-D Manitou knows that without the serial number you are guessing. Guessing costs you time and money.

K-D Manitou K5705, K5797, K5755, K1479 Parts Catalog: What’s Inside

Open the contents and you see the real structure. Mast rail assemblies start on page 2. Then come the primary cylinder assemblies — three different variants: R19875_1 (and similar), R25390_1 or R19875_1_FX, and R22375. The catalog separates them because the mounting brackets and seal profiles differ. Secondary cylinder assemblies follow: R19880_1 and R22395. Chain sections cover primary, secondary, and tertiary chains with the correct pitch and pin count. The hydraulic system section on page 28 covers the lines and fittings. Carriage sections split by serial number break: 700396 and below, then 700397 and above. Hose reel kits — 3-way and 4-way — and an internal hose kit round it out. A mast decals supplement and parts index finish the document.

Mast Rail Assemblies and Cylinder Parts

If you are replacing a worn outer rail or need the wear strips, the mast rail assemblies page shows the rail sections and hardware. The cylinder assemblies are where most of the work happens. Each primary cylinder assembly page lists the cylinder tube, piston, rod, seals, and retaining hardware. The secondary cylinder assemblies follow the same structure. Without the correct cylinder part number you risk ordering a bore that does not match your mast model. The catalog makes that match possible because it ties every item number to a specific model: K5705, K5797, K5755, or K1479. Do not assume one primary cylinder fits all four.

Does This Catalog Cover Hydraulic Systems?

Yes, but only the mast-related hydraulic circuits. Page 28 shows the hydraulic system for the mast — hoses, fittings, and the hose reel kits. The internal hose kit section (page 40) lists the hoses that run inside the mast rails. If you need the main hydraulic pump or control valve, those are not here. This is a mast parts catalog, not a full truck manual. But for the mast plumbing, it is complete. You can identify the correct hose assembly by the model and serial number, then order the factory part.

45 Pages of Factory Part Numbers

Forty-five pages sounds thin next to a full service manual, but for parts identification it is all you need. Each page carries one or two exploded views with a table underneath. The item number, part number, description, quantity, and model applicability are right there. No flipping to a separate index for every part — the index is at the back. The supplement pages include the parts index. The catalog was published with revision R/08-99 (catalog R371), so the part numbers reflect what K-D Manitou used at that time. If your mast was modified after manufacture, the catalog says modifications must be authorized by K-D Manitou and noted in your records. That is straight from the manufacturer.

Ordering the Correct Parts: Serial Number Required

Inside the front cover the catalog states: “Most important when ordering parts, is providing the correct serial number as assigned to the mast at the factory.” It then provides blanks for mast model number and serial number. Every time you call a dealer, you need that serial number. The identification plate is stamped on the right side of the outer rail at or above eye level. Write it down. If you do not, you will get the wrong carriage section — because the catalog splits carriages at serial number 700396/700397. That split exists for a reason: the mounting geometry changed. The catalog saves that headache by showing both versions.

Chain, Carriage, and Hose Reel Sections

Chain selection is not guesswork. Primary chain on page 22, secondary and tertiary on page 24. Each chain assembly lists the chain part number, connecting links, and anchor pins. The carriage sections (pages 32 and 34) show the fork carriage, backrest, and related hardware — one for serial numbers 700396 and below, one for 700397 and above. The hose reel kits (3-way and 4-way) on pages 36 and 38 cover the reel, roller brackets, and hose routing. The internal hose kit on page 40 lists the hoses that run inside the mast structure. Every section relies on the same item-number-to-part-number logic.

Why OEM Documentation Beats Aftermarket Copies

I have seen aftermarket parts catalogs that miss a seal variation or merge two cylinder assemblies into one drawing. Then you order a seal kit that does not fit and the machine is down another day. This catalog is the original OEM print from K-D Manitou. The part numbers are the ones the factory stamped into the steel. The illustrations match the real hardware because they were drawn from production drawings. If you want to avoid that headache, stick with factory documentation. For more on the importance of OEM specs in heavy equipment, see Automotive Industry Overview. The same principle applies to forklift mast parts — the difference between a working mast and a leaking cylinder is often a single correct part number.

Related manuals that cover other K-D Manitou models include K-D Manitou Mast Parts Catalog and K-D Manitou MVT 1230L MVT1230LC Parts Catalog – 264 Pages. For the 1991-era variants, check K-D Manitou K5705, K5797, K5755, K1479, K1787 1991 Parts Catalog. Additional context on industry standards is available at Automotive Industry Overview.

Can I use this catalog for all K-D Manitou mast models?

No. This catalog covers only K5705, K5797, K5755, and K1479.

What information do I need when ordering parts?

You need the mast model number and the mast serial number. The model number is on the identification plate on the right side of the outer rail. The serial number is critical because the carriage, cylinder, and chain assemblies differ by serial number range. For example, carriage sections split at serial number 700396/700397. Without the serial number, the dealer cannot guarantee the correct part. The catalog includes blanks for recording these numbers and recommends doing so immediately. Also note any authorized modifications — K-D Manitou requires modifications to be documented and approved. If you skip the serial number, you risk ordering a primary cylinder that does not match the mast bore or a chain with the wrong pitch. The catalog’s table of contents shows every assembly tied to specific models and serial breaks. Do not order without it.

Time is money in a shop. When the mast is torn down and you need the seal kit for the secondary cylinder, you do not want to flip through a generic parts guide. You want the factory drawing with the K-D Manitou part number right there. That is what this 45-page catalog gives you. Access the Factory Manual and keep it on your tablet or print it for the toolbox. Your next mast rebuild will go smoother.