Description

Genie S-40, S-45 2012 Parts Catalog – OEM Factory Manual for SN 831 to 7000

I’ve been turning wrenches for 28 years. Know what burns my time? Ordering the wrong part because some third-party diagram had the damn part number crossed. That’s why you need the Genie S-40, S-45 2012 Parts Catalog – not a reprint, not a PDF someone scanned off a coffee-stained copy. This is the factory OEM document from Genie, part number 52090, covering serial numbers 831 to 7000. 190 pages of actual part breakdowns, not guesses. I’ve seen guys waste an entire afternoon chasing the wrong hydraulic filter because their aftermarket catalog had a typo in the cartridge number. This manual eliminates that. You want to fix your Genie lift without making two trips to the dealer? This is the place to start. Match your serial number to the range on page 3, then order with confidence that you’re getting the correct Genie part.

Reading the Serial Number – Don’t Skip This

Your Genie lift has a serial number stamped on the chassis and a label under the cover. Page 3 of this manual shows you exactly how to read it. The format: model, year, sequence. Example: S4008-12345 means S-40, 2008 model year, sequence 12345. This manual covers S-40 and S-45 from SN 831 to 7000. If your machine is outside that range, you need a different edition. Match your serial first, or you’re ordering parts for the wrong machine.

Decals: Two Views, One Critical Set

The decal section (View 1 and View 2) lists every safety label and identification decal on the machine. These aren’t decorations – they’re required for OSHA compliance and safe operation. The manual gives you the exact Genie part number for each decal, so you can replace faded or missing labels correctly. Don’t guess which “Danger” sticker goes where.

2WD Drive Chassis Components – What Breaks Most

Page 14 covers the steer axle linkage for oscillating models. The exploded diagram shows every bushing, pin, and washer. This section alone saves you hours of trying to figure out which tie rod end fits. Genie’s OEM part numbers are right there. Aftermarket catalogs often use superseded numbers – this factory catalog has the correct current part.

Parts Stocking List – Know What to Keep On Hand

There’s a section called Parts Stocking List (page 7). Genie, the manufacturer, tells you which parts wear fastest and should be in your inventory. That’s a list built from field experience, not a marketing department guess. If you run a rental fleet or a service truck, this list is gold.

Ordering Parts the Factory Way

Pages 8-9 include a Service Parts Fax Order Form. That form is set up exactly how Genie’s parts department expects orders. Fill it out, fax it, and get fewer “what’s your serial number?” calls back. The manual also explains how to order parts directly from Genie or their dealers. No middleman confusion.

Don’t waste time on aftermarket part lists that might be wrong.

Does this manual cover my S-45 with serial number 5500?

Yes, if your serial number is between 831 and 7000. Check the serial plate under the cover.

Is this a repair manual or a parts catalog?

Parts catalog. You get exploded diagrams with OEM part numbers, not step-by-step repair procedures. Use the factory service manual for repairs.

How often is this manual updated?

Genie updates the electronic version of this manual frequently. If you have a printed copy, you can keep it up to date by accessing new figures from the Genie website at www.genielift.com. For the most up-to-date parts information, you should use the Parts Lookup System on the Genie website. This 2012 edition, Rev E21, covers the specific serial number range from 831 to 7000. If your machine has a serial number above 7000, you will need the later manual, part number 89721. Always verify your serial number before ordering parts – using an outdated manual will result in wrong part numbers and wasted time. Genie also encourages readers to notify them of errors for future printings. That level of manufacturer support is why you buy OEM.

Can I use aftermarket parts catalogs instead?

You can, but be prepared for errors. Aftermarket copies often miss updates or mislabel parts. This factory catalog ensures you get the exact Genie part number.

Genie, a Terex brand, is a major player in the Automotive Industry Overview. For background on the industry, check the Automotive Industry Overview.

If you need a later version, see the Genie S-40 S-45 2017 Parts Catalog.

• Genie S-60, S-65 2012 Parts Catalog – Factory OEM Manual
• Genie S-80 S-85 Parts Manual SN 966 to 3081

Stop guessing part numbers. Click the button and Access the Factory Manual for your Genie S-40 or S-45. Your parts orders will match what’s on the machine.