Description

Dynapac F800T 2015 Parts Catalog – OEM Factory Specs

Some parts catalogs are photocopies of photocopies. This one is the actual OEM file from Dynapac Dynapac—470 pages of factory part numbers, exploded views, and kit breakdowns. If you are maintaining a F800T tracked paver with serial number 10002133TFC004579 and the QSB6.7-C173 engine, you need this Dynapac F800T 2015 Parts Catalog on the bench beside the machine, not a third-party list that swapped a bolt for a bushing. Parts catalogs look boring until you order the wrong conveyor bearing and the paver sits for a week. This one kills that downtime.

Service and Maintenance Kits: What You Get

Page 1 lists the startup kit for the 100-hour service. Page 3 continues with maintenance kits at 500, 1000, and 2000 hours. Each kit groups every gasket, seal, filter, and fastener you need. The hopper skirt kit, conveyor chain kit, and sprocket kit are all broken out separately. If you are planning a major service interval, flip straight to the kit pages instead of hunting individual part numbers. The catalog also includes the D717955090 Uptime kit—that is the one you want for quick field repairs on the screed disconnect system. No guessing which o-ring fits which port.

Mechanical Breakdowns: Frame, Cover, and Screed Arm

The mechanical section starts with the frame assembly on page 43. It includes the fume extractor assembly and the blower (D717012501) separately. Cover assemblies, engine cover panels—left, right, front, rear, middle—every stamping gets its own exploded view with a callout. The screed arm assembly on page 75 shows the front guide wheel, slope arm assembly, and the scaleplate assembly (4812248631). Left and right indicator scale assemblies are on pages 85 and 87. If you have a worn scaleplate or a bent slope arm, you can pull the exact part number without calling the dealer.

Auger and Conveyor: Two Critical Systems

Auger assembly for the 8′ paver begins on page 95. It covers the sprocket box suspension left and right, the auger drive assembly (including the gearbox), main auger bearing, and the prevent segregation device. The base backplate assembly splits into left and right main support assemblies on pages 117 and 119. Conveyor drive assembly starts on page 129 with the tensioner, chain assembly, and the lubrication system. The complete conveyor drive assembly—including the motor and gearbox—is detailed from page 137. If you need to replace a conveyor chain or rebuild the auger drive, the illustrations show exact bolt patterns and spacer locations.

3 Major Assemblies Under the Hood

First, the engine section covers the F800 engine system, the full engine assembly (including the air cleaner 4812222043), the exhaust stack, and the cooling system (4812248665). Second, the drive section lists the track group assemblies for RH and LH sides, the drive sub-assembly, the track drive gearbox (D717170600), bogie assembly, idler wheel hub, and the bracket for hopper. Third, the hydraulic system includes the fuel tank assembly, the hydraulic component assembly with motor and gearbox, pump drive complete, and the propel pump (D717191000). That pump costs enough to justify buying this catalog twice over.

Get the Right Part Numbers from Dynapac

Every part number in this catalog is verified from the original Dynapac engineering database. The copyright on page 2 states ©2015 Dynapac (China) Compaction & Paving Equipment Co., Ltd., part number 4812247561. This is not a reprint or a scan—it is the exact PDF the factory uses. Use only authorized parts. The catalog specifies that any damage from unauthorized parts voids warranty and product liability. When you order a hydraulic extension auger kit or a basic auger blade, the number you read here matches the bin at the parts counter. For an overview of the automotive industry standards that apply to heavy equipment, see this Automotive Industry Overview Automotive Industry Overview.

Related Manuals

If you also service other Dynapac machines, check these factory parts catalogs:

• Dynapac F800T 2015 Parts Catalog – OEM Factory Specs
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer

Frequently Asked Questions

Does this catalog include torque specs or service procedures?

No. This is a parts catalog, not a service manual. It is for ordering parts only.

How do I find a specific part, like the conveyor chain, in this catalog?

Use the table of contents starting on page 3. The conveyor chain assembly for one side is listed under “Service, repair and wear part kits” on page 15. If you need the complete conveyor drive assembly with motor and gearbox, go to page 137. Each exploded view has numbered callouts that correspond to a parts table with quantities and descriptions. Cross-reference the illustration number with the part number column, then order that number. If you cannot find it, check the index at the back of the PDF—every major assembly is listed alphabetically under “Conveyor.”

This catalog runs 470 pages and covers every nut, bolt, hose, and hydraulic component for the F800T paver. If you wrench on these machines, you need the factory parts breakdown. Access the Factory Manual now and keep a copy on your tablet or print the pages you need for the job.