Description

Dynapac F2500CS 2017 Parts Catalog

I’ve been torquing bolts for 28 years, and if there’s one thing that burns my ass, it’s ordering a part that doesn’t fit because somebody grabbed a number off a forum. This is the Dynapac F2500CS 2017 Parts Catalog – 614 pages of factory-sourced part numbers, exploded views, and kit breakdowns. No aftermarket guessing game. The first two pages of this document warn you: use only authorized parts or kiss your warranty goodbye. That’s not a suggestion.

Dynapac F2500CS 2017 Parts Catalog: Service Kits and Wear Parts

You want to keep this tracked paver running? Then you need to know which service kit to throw at it. This catalog breaks out every service interval: 500-hour and 1000-hour kits for Tier3 / Stage IIIa engines. Part numbers like 4700691229 (500h TIER 3) and 4812046969 (1000h TIER 3, stage 2) are listed with full component breakdowns. Wear part kits for the auger, hopper, conveyor, and drive – all separate sections. Conveyor chain wear parts come in double (4812027444) and single (4812029178) variants. Page 12 gives you the 500-hour kit contents. Page 18 covers the lubricants and operating substances. If you’re ordering a filter kit, the 1000h filter kit number is 4812023923. Don’t mix up intervals – the catalog tells you exactly what goes in each.

Mechanical Section: Main Frame and Side Screed Arms

Locking mechanical assembly? Page 26. That’s where you find the part number 4812029222. The mechanical section covers the main frame (part 4812016237), side screed arms (l.h. 4812029165, r.h. 4812029197), push roller with hydraulic crosshead (4812044911A), and the isolated covering. Each subassembly has its own exploded diagram with callouts. The covering section alone runs from page 35 to 50+, with every hood support, air guide, and retainer listed. If you need a side arm guiding part, cross-reference 4720000097 – it appears on both left and right screed arms. This catalog saves you from cross-referencing three different PDFs to find one bolt.

Why Factory Part Numbers Matter

Aftermarket parts catalogs are garbage for precise part numbers. I’ve seen guys order a “compatible” wear part kit for the auger and end up with wings that don’t match the Ø380mm spec. This catalog lists the exact OEM part numbers – like 4812027478 for the auger wings – so you get the right diameter and mounting hole pattern. The document explicitly states: any damage from unauthorized parts voids warranty and product liability. You want to trust your $200,000 paver to a Chinese cross-reference site? Your call. I’d rather spend the $30 on the factory PDF.

Real-World Use Case: Replacing the Conveyor Chain

You’re on a job site. The conveyor chain snaps. You need the wear part kit fast. Instead of measuring pitch and guessing, you open this catalog. Go to the Conveyor kits section. You’ll see two options: double chain kit (4812027444) and single chain kit (4812029178). The exploded diagram shows exactly which plates and rollers come in the kit. Page 8 covers the conveyor plates complete assembly (4812016660). You order the right part once. No returns. No downtime waiting for a replacement of a replacement. That’s what a factory parts catalog does – it keeps your machine running and your customer happy.

Source Authenticity: OEM Print vs Aftermarket PDF

This is an original Dynapac factory document printed on 9th Jan 2017. The OCR excerpt I read shows the exact disclaimer language – use only authorized parts. The PDF includes the Atlas Copco copyright and Dynapac GmbH branding. Aftermarket reprints often miss the latest revision numbers or use scanned images that lose detail on part callouts. This one is clean, searchable, and contains the full 614 pages including the covering section that splits into two variants based on serial number (pre- and post-FG001594). If you need the operator’s safety procedures alongside this, grab the Dynapac F2500C F2500CS Operators Manual – Factory Specs & Safety. For the PL2000LS cold planer, check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec or the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer. The Dynapac factory designed this machine for Tier3/Stage IIIa compliance, and the catalog reflects that. For context on industry standards, see Automotive Industry Overview – though that’s general, not paver-specific.

Questions About the F2500CS Parts Catalog?

Is this the same as a service or repair manual?

No. This catalog lists parts, not repair instructions.

How do I find the correct part number for my F2500CS?

Start with the exploded diagrams in the Mechanical section. Find the assembly group (e.g., Main frame on page 19). Cross-reference the part number with your machine’s serial number. The catalog covers both pre- and post-serial number FG001594 for the covering section. If you need a wear kit, go to the service kits chapter – for example, the 500-hour service kit (part 4700691229) is listed on page 12. Always verify with your machine’s configuration because Tier3 has different kits than earlier stages. Do not rely on aftermarket cross-reference sites; they get it wrong half the time.

If you’re serious about keeping your paver on the job instead of in the shop waiting on wrong parts, this catalog is the only way to go. Access the Factory Manual now.