Description

Dynapac F2500C 2014 Parts Catalog – OEM Factory Specs

If you’re tracking down a part number for a Dynapac F2500C paver, you need the real catalog. The Dynapac F2500C 2014 Parts Catalog is 567 pages of factory-issued part numbers, exploded views, and assembly breakdowns. Anything else is a gamble. I’ve seen guys order the wrong conveyor chain because they used a third-party list. That costs a week of downtime and a return shipping headache. This catalog comes straight from Dynapac GmbH, Wardenburg, Germany – the same source the dealer uses.

A parts catalog doesn’t tell you how to fix the machine. It tells you exactly which bolt, bearing, or hose to order. That matters more than most DIY guys realize. Order the wrong part and you’re waiting another week.

Gr.07 Drive TIER 3 – Engine and Fuel System Parts

Assembly group 07 covers the drive system for TIER 3 machines. Inside you’ll find the combined cooler and air filter (part 4812039023), fuel system components including the tank (4812028928), engine mounting brackets, muffler, and the end pipe / rotary feedthrough assembly. Each subassembly is broken down with individual part numbers and quantities. If your F2500C needs a cable W12 (4812005952) or a joint rod (4812037585), this is where you find it. Page 12 gives you the drive gear box breakdown for both left and right track groups – part 4812035018 with the wear part kit rubber plates (4812035550) listed right under it. The table of contents on page 4 shows every group at a glance.

Track Group and Undercarriage Parts

Gr.02 Track group splits into left and right short track assemblies. Each includes the drive gear box and rubber plate wear kits. The catalog also covers the track cleaner assembly, scrapers, push roller (Gr.03), and side arm guiding components. These parts take a beating on a paver. Having the correct part numbers for the scrapers (4812030910 left, 4812030911 right) keeps the track cleaner working properly. The splash guard and steering guide are listed under Gr.01 Main frame. Using factory drawings means you see the exact orientation and fastener count – something aftermarket catalogs often skip.

Hydraulic System Breakdown: Gr.09

Two versions of Gr.09 appear in the TOC – one for earlier serial numbers and one for later. Both cover the hydraulic drive pumps (4812026136 and 4812026139), manual pump, auger control block, conveyor directional spool valves, tamper/vibration hydraulics, and the hydraulic fan circuit. The tank assembly includes the return suction filter. A cylinder schema is also included. Hydraulic parts need exact match due to pressure ratings and port sizes. The catalog’s part numbers tie directly to Dynapac’s ordering system. No cross-referencing from generic manuals.

Conveyor Wear Part Kits and Chain Guides

Gr.04 Conveyor has multiple variants: single bar count and double bar count. Each has its own wear part kit for conveyor plates and chain. The conveyor limit switches – left and right – are listed under two different subassembly numbers (4812030487 and 4812009079) depending on the machine configuration. Chain guide part D635060800A is a common replacement item. The conveyor motor and turn assembly are also covered. Wear part kits save you from ordering individual plates one by one. You get the kit part number (e.g., 4812027441 for plates, 4812027440 for guide plates) and order the whole set.

What Makes This Catalog Different from Aftermarket Lists?

Aftermarket parts catalogs often combine multiple models, use generic illustrations, or omit supersession information. This OEM catalog is specific to the F2500C with serial number range 0G000521 through V5100TV s/n 3100519. Dynapac itself warns against unauthorized parts – they affect warranty and liability. The catalog states: “Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability.” That’s a direct quote from page 2. Using this factory catalog means every part number has been verified against the engineering drawings. If you need the 2017 revision of this catalog, check Dynapac F2500C 2017 Parts Catalog – OEM Factory Specs. For the wheeled paver version, see Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec. And for the exact same manual, Dynapac F2500C 2014 Parts Catalog – OEM Factory Specs is the direct link.

Get the Right Part Number Before You Order

Before you call the dealer or search online, open this PDF and find the assembly group. The 567 pages are searchable. Type in the old part number and see if it’s listed or superseded. Dynapac Dynapac is part of Atlas Copco, and their part numbering system is consistent across product lines. For a broader look at industry part numbering standards, see Automotive Industry Overview. But for this machine – stick with the factory catalog. Access the Factory Manual and keep it on your tablet in the shop. It beats flipping through a greasy paper catalog or guessing from an online forum.

Does this catalog include torque specs?

No. This is a parts catalog. Use the service manual for torque values.

Can I use this catalog for serial numbers outside the range listed?

The catalog covers F2500C s/n 0G000521 to V5100TV s/n 3100519. If your machine falls outside this serial number range, the part numbers may differ. Dynapac makes engineering changes that revise part numbers. Using the wrong catalog can result in ordering incorrect components, leading to fitment issues. You should verify your machine’s serial number and consult with a Dynapac dealer or refer to the specific catalog for your serial number range. That said, the majority of F2500C units in North America fall within this range.

Is this a PDF or a printed manual?

It’s a digital PDF format, 567 pages, searchable. You can print specific pages as needed.

How do I find a specific part number?

Use the table of contents or the part number index. The catalog is organized by assembly groups: Gr.01 main frame, Gr.02 track group, etc. Each group has exploded view diagrams with callouts. Find the assembly, then locate the part number. If you know the old part number, you can search the PDF. Dynapac also lists supersessions in some cases, but not always. If you don’t see a supersession, check the latest revision from Dynapac. This catalog is from 2014, so later revisions may have changes. Always confirm with a dealer for critical parts.

• Dynapac F2500C 2014 Parts Catalog – OEM Factory Specs”>Dynapac F2500C 2014 Parts Catalog – OEM Factory Specs
• Dynapac F2500C 2017 Parts Catalog – OEM Factory Specs”>Dynapac F2500C 2017 Parts Catalog – OEM Factory Specs
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec”>Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec