Description

Dynapac F2500C 2014 Parts Catalog – OEM Factory Parts Book

If you’ve ever ordered a part for a F2500C paver and ended up with the wrong flange, wrong hydraulic pump, or a seal that doesn’t fit, you already know the value of a genuine factory parts catalog. The **Dynapac F2500C 2014 Parts Catalog** puts the complete exploded view and OEM part numbers in front of you – no aftermarket guesswork, no cross-referencing three different websites. This is the original 2014 edition, 567 pages thick, covering serial numbers 0G000443 through V5100TV 3100430. It’s what my guys use when we need to pull a part number fast on a machine that’s down.

What Makes the Dynapac F2500C 2014 Parts Catalog Different?

Aftermarket parts sites will sell you a blurry PDF that might or might not match your machine. This catalog comes straight from Dynapac GmbH, Wardenburg, Germany – the people who built the paver. Page 4 starts with a table of contents that shows every assembly group, from Gr.01 Main frame to Gr.09 Hydraulic. Each section has the exact part numbers for your serial range. You don’t have to guess whether a wear part kit fits a short track group – the catalog breaks it down by left-hand and right-hand, with subassemblies like drive gear box (part 4812035018) and rubber plate wear kit (4812035550). That level of detail saves you billing a customer for the wrong part and having to reorder.

Gr.02 Track Group – Where Most Parts Mistakes Happen

The track group on a paver takes a beating. Rubber plates wear out, scrapers get chewed up. In this catalog, Gr.02 Track group (starting on page 9 in the TOC) lists both short track assemblies – left-hand (4812027751) and right-hand (4812027752). Each one includes the drive gear box and the wear part kit for rubber plates. There’s also a separate listing for the track cleaner assembly (4812028439) with scraper part numbers left and right. If you’ve ever installed a scraper that didn’t line up with the track, you know why having the factory drawing matters. This is the page you bookmark if you work on these machines regularly.

567 Pages – A Breakdown by Assembly Group

567 pages sounds overwhelming, but the structure is logical. The catalog groups parts by major systems: Main frame, Track group, Push roller, Conveyor, Hopper, Side screed arms, Drive (TIER 3), Split gear, Hydraulic. Each group gets its own set of pages with exploded diagrams and callouts. For example, Gr.04 Conveyor is broken into conveyor drive, motor, limit switches, and wear parts for both single and double bar configurations. The hydraulic section (Gr.09) is massive – includes pumps, control blocks, hose packages, and a cylinder schema. You want to order a pressure relief valve for the conveyor? Part number 4812026541 is right there next to the directional spool valve drawing. No flipping through five pages of unrelated parts.

Does This Parts Catalog Cover Your Serial Number?

This edition covers F2500C serial number 0G000443 up to V5100TV serial number 3100430. If your machine falls inside that range, every assembly listed applies. The first page of the manual explicitly states the machine type and serial numbers it supports. If you have a later production run, check the Dynapac F2500C 2017 Parts Catalog – OEM Factory Specs or the Dynapac F2500C 2014 Parts Catalog – OEM Factory Specs (note: this is the same edition). For other Dynapac pavers like the PL2000LS, the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec covers a different machine. Always verify serial range before ordering – the table of contents on page 4 has an “X” mark showing which assemblies are used in your specific machine.

Get the Right Part Number the First Time

Every part number in this catalog is the genuine Dynapac factory number. Use these to order from any dealer. The catalog also notes when parts belong to a specific subassembly – for instance, the wear part kit for conveyor chains has one part number for single-bar conveyors (4812029178) and another for double-bar (4812027444). If you mix them up, you’ll be reordering. I’ve watched guys try to cross-reference aftermarket numbers and end up with a chain pitch that doesn’t match the sprocket. This catalog eliminates that waste. Stick with factory data.

FAQ

Can I use this catalog for a different serial number range?

Only if your machine falls within the serial range listed – 0G000443 to V5100TV 3100430.

Does the catalog include torque specs or repair instructions?

No. This is a parts catalog, not a service manual. It is designed solely for ordering spare parts. It contains exploded views and part numbers for every assembly, but you still need the Safety and operating instructions for any disassembly or reassembly work. The front page of the catalog explicitly states: ‘This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts.’ For torque values or repair procedures, you want the factory service manual for your specific model. That said, having the correct part number in hand before you open a wrench halves the chance of a comeback.

If you want to verify the official Dynapac part numbering system, check the Dynapac website. This level of detail is what separates factory documentation from aftermarket copies – ask anyone in the [Automotive Industry Overview]. Access the Factory Manual and get your paver back to paving.