Description

Dynapac CC800 Parts Catalog

Look, I’ve spent more hours tracking down parts for compactors than I care to admit. You get the wrong seal, you wait three days for the return, the machine sits, and the customer breathes down your neck. That stops when you have the Dynapac CC800 Parts Catalog on your bench. This is the real OEM document – 146 pages of exploded diagrams and part numbers straight from Dynapac. No aftermarket reinterpretation, no missing revisions.

This catalog is built around the Dynapac CC800 vibratory roller with the Perkins 403D-11 diesel engine. It covers every serial number range listed on page 3, and if you’re ordering parts, you absolutely need to read page 4 before you touch the phone. Failing to give your dealer the machine serial number and the part number from this book is the fastest way to get a box of wrong stuff.

Ordering Spare Parts: The 6-Step Procedure on Page 4

Page 4 spells it out in six points: type of machine, roller serial number, quantity, part number, denomination, and dimensions if you’re ordering by length. I’ve seen techs skip step two and get a hydraulic motor for a different production run. That’s wasted money. The catalog insists on these steps in four languages, and there’s a reason – Dynapac doesn’t want the returns either. You follow that, you get the right part.

Perkins 403D-11 Diesel Engine: What the Parts Catalog Shows

The engine section covers every component from the fuel injection pump to the oil pan gasket. You get exploded views with labeled callouts, and each part has a unique number. Want the water pump seal? Look up the group for the cooling system. No guessing which revision – the catalog specifies which engine variant (403D-11) and which catalogue issue (SCC800-2EN1, -2EN2, or -2EN3) matches your serial number. That level of detail keeps me from ordering the wrong thermostat housing.

146 Pages of Exploded Views — Not Just a Parts List

Don’t confuse this with a flat list of numbers. The catalog is organized by assembly groups – frame, drum, hydraulic system, electrical, engine. Each group has its own section with page headers that tell you exactly what you’re looking at. Page 5 shows a notes and changes table so you can track revisions. That matters because Dynapac updates parts without changing the whole manual. If you have a roller from 2009, you need the SCC800-2EN3 issue. This catalog gives you the data to verify.

How to Identify Your CC800 Serial Number and Catalogue Issue

Page 3 lists the valid serial number ranges for each catalogue issue. You need to find the serial number plate on your machine – it’s stamped near the operator platform. Then match it to the table. If yours falls under SCC800-2EN3, you’re holding the right manual. Don’t guess. I’ve had to tell guys their roller was built in 2008 and they needed the -2EN1 version. That mistake costs a week of downtime.

Safety Warnings When Handling Components

This being a parts catalog, it doesn’t have service procedures, but you still need to apply common sense. Hydraulic systems under pressure, heavy drum sections – use proper lifting equipment. The catalog lists components like the vibration motor mounts and hydraulic filters. When you order seals or O-rings, confirm the material compatibility with your hydraulic fluid. Dynapac’s part numbering system includes revision letters, so a -A1 might supersede an earlier version. Check the notes on page 5 before ordering.

OEM vs Aftermarket: Why Factory Documentation Wins

Aftermarket parts catalogs often reprint old drawings, skip revision updates, or leave out the multi-language ordering instructions. This one is the actual factory PDF – same as what Dynapac dealers use. You get the part numbers, the denomination in English, Swedish, German, Italian, Spanish, and French, and the serial number validation. That’s why I won’t touch a third-party copy. You want the part to fit the first time? Use the original print.

If your work involves other Dynapac models, check the related catalogs: Dynapac CC800 2015 Parts Catalog for later production runs, Dynapac CC800 2011 Parts Catalog for mid-cycle machines, or the general Dynapac CC800 Parts Catalog selection. For broader context on how heavy equipment documentation differs from automotive, see this Automotive Industry Overview.

Does this catalog include torque specs for the vibratory drum?

No. This is a parts catalog, not a service manual. It lists part numbers and exploded views. You’ll need a separate service manual for torque values.

Can I use this for my CC800 with a different engine?

This catalog specifically covers the CC800 vibratory roller with the Perkins 403D-11 diesel engine. If your machine has a different engine, you need the correct catalog for your serial number. Check the valid serial number range on page 3. The catalogue issue (e.g., SCC800-2EN3) is tied to that engine configuration. Using the wrong catalog will give you wrong part numbers for the engine group.

How do I order a part not listed in the exploded views?

The catalog is organized by groups — you’ll find sections for the engine, hydraulic system, frame, etc. If you can’t find a part, contact your dealer with the machine serial number. The catalog includes a “Notes” section on page 5 and a changes table for superseded parts. But if a part isn’t illustrated, call Dynapac directly. They can often cross-reference from the serial number and production date. Don’t skip step two on page 4 — that serial number is your key.

What is the difference between this Parts Catalog and a Service Manual?

This catalog is for ordering parts only. It has no repair procedures, torque specs, or diagnostic steps. Get the service manual separately.

You want to stop wasting time on wrong parts? Access the Factory Manual today and keep it in your tool box next to your tablet.