Description

Dynapac CC800 2011 Parts Catalog

I’ve seen it happen in my shop more times than I want to count. A guy brings in a Dynapac CC800 2011 Parts Catalog roller needing a new hydraulic motor, and he’s got a part number he found on some forum. Turns out it’s the wrong revision, the splines don’t match, and now the machine is down for another week while he waits for the correct part. That’s why I tell every tech and equipment owner to get the factory parts catalog before you order anything. This 154-page document is exactly what Dynapac put together – exploded views, part numbers, service kit breakdowns, and the numerical index that lets you cross-check everything. You don’t guess with this thing. You look it up, you order it, you install it.

Engine Section: Perkins 403D-11 Part Numbers

If you work on the Perkins 403D-11 diesel in your CC800, you need the exact part numbers for rebuilds or replacements. This catalog breaks down the engine into cooling system, exhaust system, fuel system, and air intake system. Each component has a unique part number. The service kits for 50h, 500h, and 1000h intervals are listed with part numbers like 4700940208, 4700940209, and 4700940210. I’ve seen guys order a generic filter kit and end up with the wrong thread pitch on the oil filter. Don’t be that guy.

Hydraulic System Breakdown – Propulsion, Vibration, Steering

Your CC800 has three separate hydraulic circuits. The propulsion and brake system uses a hydraulic motor (4700387270) and pump (4700387269). The pump assembly is broken down into rotary group, port plate with pressure valves, gear pump, and control mechanism. The vibration circuit has its own components, and the steering circuit includes a steering valve (4700387274) and hydraulic cylinder (4700387275). The catalog shows every seal, every fitting, every port plate as a separate part. Ordering from an aftermarket list that lumps them together? You’ll get the wrong pressure valve and have to tear it apart again.

3 Reasons to Use the OEM Parts Catalog Over an Aftermarket List

First, aftermarket catalogs often combine revisions that don’t apply to your serial number range. This catalog is valid from S/N 10000300x0A000001 – and matches exactly the 2011 production. Second, the exploded diagrams show you how the parts fit together, not just a list of numbers. Third, the numerical index lets you verify a part number against the page. If you have a part in hand and the number is worn off, you can look up the index and find the right page. Aftermarket lists don’t have that.

Does This Catalog Cover the Drum Assembly and Scraper Kits?

Yes. The Drum section lists all drum components, including the eccentric shaft kit (4700945710), drum rotation kit (4700945711), and scraper kit (4700940672). The Frame section covers the hitch, scrapers, engine hood, and sprinkler system. I’ve ordered scraper kits for a CC800 from a third-party supplier and got the wrong blade angle. This catalog shows the exact part number and you can see the assembly. Also covered: shock absorber kit for drum (4700945552), repair kit for steering hitch (4700945928).

Get the Right Service Kit: 50h, 500h, 1000h Intervals

Maintenance intervals are critical. This catalog lists the complete service kits for the Perkins engine: 50-hour, 500-hour, and 1000-hour kits. Each kit part number bundles the filters, belts, and gaskets you need. If you’re doing a 500-hour service, order 4700940209 and you’ll have everything in one box. Dynapac CC800 2015 Parts Catalog covers later production, but the 2011 catalog is the correct one for your machine.

For other Dynapac models, check Dynapac CC800 Parts Catalog for alternative editions, or Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec if you work on a planer. The same OEM attention to detail applies. Automotive Industry Overview isn’t directly related, but the principle of using factory documentation is the same across all machinery.

Source Validity: This Is Not a Reprint

This is the original factory PDF from Dynapac, published in 2011. It’s not a scanned copy of a copy. The exploded views are clear, the part numbers are legible, and the numerical index is searchable. Aftermarket parts catalogs that claim to cover the CC800 often copy old data and miss updates. I’ve had a client order a “compatible” water tank option part that didn’t fit because the aftermarket list used an older revision. With this catalog, you get the exact part number for your serial number range. That’s all I care about.

Is this the same as a repair manual?

No. This is a parts catalog for ordering components, not a repair guide.

What serial numbers does this cover?

It covers CC800 rollers with serial number from 10000300x0A000001 and up, produced for 2011.

Does it include electrical diagrams?

The Electrical equipment section lists all electrical components with part numbers – control panel, relays, driving lights, working lights, rotating beacon (Rops option), back-up alarm option. It shows the assemblies as exploded diagrams so you can identify each relay, switch, and harness connector. However, this is a parts catalog, not a wiring diagram manual. If you need electrical troubleshooting, you’ll want the service manual. For ordering replacement parts, this is the source. Each part has a unique number and you can verify against the numerical index at the back. So you can order the exact headlight assembly or relay without cross-referencing.

Can I use this for a different year?

This edition is for 2011 rollers with serial numbers from 10000300x0A000001. Later revisions may have different parts. Always match your serial number before ordering.

Stop ordering parts and hoping they fit. Get the document that Dynapac built for this machine. Access the Factory Manual from the link above and keep your roller on the job.