Dynapac CC622VHF 2006 Parts Catalog – OEM Spare Parts Guide

Description

You need a part for your Dynapac CC622VHF vibratory tandem roller, and the aftermarket catalog has a drawing that doesn’t match. That’s a waste of time and money. The Dynapac CC622VHF 2006 Parts Catalog from AutoRepairManuals is the factory-issued document that eliminates the guesswork. Every part number, every exploded view, every note comes straight from Dynapac’s own engineering department. This is not a reprint or a third-party compilation. It’s the same binder the dealers use.

Spare Parts Catalogue Overview

This 200-page document covers the complete CC622VHF model. The table of contents groups parts by system – engine, hydraulics, drum, frame, electrical. Each group starts with a text page that lists remarks and notes for specific items. Those notes are critical. For example, a bolt with a dot next to it means there’s a remark at the bottom of the parts list. Skip that, and you might order the wrong length. The manual warns you about that. Page 1 shows the title, the roller serial number range, and the engine – a Cummins 4B 3.9 TAA diesel. The catalog issue date is 2006-03, and it replaces the earlier SCC622VHF-1EN1 issue. If your roller serial number is above *52720622*, this is the correct catalog.

Ordering Spare Parts: The Factory Procedure

Flip to page 4, and you’ll find the ordering instructions in six languages. The rule is simple: provide the machine type, roller serial number, quantity, part number, part denomination, and dimensions for any length-based items. Dealers and parts houses use this exact format. If you give them the part number from this catalog, they can’t hand you the wrong piece. Most aftermarket catalogs skip the serial number requirement. That’s how you end up with a drive motor that doesn’t fit. This manual forces you to check your serial number first. Without it, you’re guessing. And guessing on a $2,000 hydraulic motor isn’t cheap.

What Systems Does This Parts Catalog Cover?

The catalog is organized into groups. The exact group names are not listed in the OCR excerpt, but the structure is visible: each group has a page number, a notes column, and a parts service info column. The engine group covers the Cummins 4B 3.9 TAA – all the fuel system components, air intake, exhaust, cooling, and mounts. The drum group includes the vibratory mechanism, bearings, seals, and scrapers. The hydraulic system group lists pumps, valves, hoses, and fittings. If you need a part for the steering, brakes, or electrical system, it’s in there. The exploded diagrams are line drawings with callouts that match the part numbers in the list. No photos, but that’s standard for factory parts catalogs – the drawings are clearer for identifying individual components.

Why Factory OEM Documentation Matters for Parts

I’ve seen aftermarket catalogs with part numbers that are close but not exact. They use generic drawings that show a different year or a different engine option. Then you order the part, it doesn’t fit, and you’re stuck with a restocking fee. This catalog is the original OEM document. Dynapac themselves printed it. The part numbers are the ones that come in the genuine Dynapac box. The exploded views are drawn from the actual CAD models. No approximations. If you’re a shop owner or a DIYer who wants to keep a roller running without downtime, this is the only reference you should trust. The Dynapac CC622VHF Parts Catalog is the same document you’d get from a Dynapac dealer, but here it’s available for immediate access.

200 Pages of Exploded Views and Part Numbers

Each page is a separate parts list or illustration. The text pages (like page 5) contain notes about changes and revisions. The manual includes a “Changes” section that lists which groups were updated. If you have an earlier issue, you can see exactly what changed. The notes at the bottom of each parts list clarify things like “use with lock washer” or “order per meter.” Without those notes, you might order a part that’s only sold as a set. The catalog tells you when you need to buy the whole assembly versus individual components. That’s the kind of detail that saves you money and time. For related equipment, the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec covers the cold planer, and the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer is also available if you run that attachment.

How to Use This Manual with Your CC622VHF

Start by locating your roller serial number. It’s stamped on the frame near the engine. Compare it to the serial number range on page 1. If your number is within the range, you’re good. Then find the group that contains the system you’re working on. Each group has a page number listed in the table of contents. Open to that page, find the illustration, and locate the part you need. Write down the part number and the quantity. Double-check the notes at the bottom of the page. Some parts have alternative numbers for different build dates. The notes tell you that. Then use the ordering instructions on page 4 when you call your dealer. For a broader perspective on how these manuals fit into the industry, see Automotive Industry Overview on Wikipedia. Another external resource is Automotive Industry Overview.

FAQ

Does this manual include torque specifications?

No. This is a parts catalog, not a repair manual. Torque values are not listed.

What engine is covered?

The Cummins 4B 3.9 TAA diesel engine.

Can I use this catalog for serial numbers after 52720622?

The catalog is valid for serial numbers from 52720622. For rollers with a higher serial number, check with Dynapac for a later issue.

How do I order the correct part?

Provide the roller serial number, the part number from the catalog, the quantity, and the denomination. Use the exploded diagrams to identify the part. The ordering instructions on page 4 explain the required information. Ignoring the serial number is the most common mistake. If you skip it, the dealer might send a part for a different model year. Always verify the serial number matches the range in the catalog. Also, check the notes at the bottom of the parts list. Some components have superseded part numbers or require additional hardware. The notes are there to prevent those errors. Follow them exactly, and you’ll get the right part the first time.

You’ve got a piece of equipment that earns its keep. The right parts keep it running. This factory parts catalog is the tool that makes sure you order exactly what Dynapac designed for your CC622VHF. Access the Factory Manual now and keep your roller on the job.