Description

Dynapac CC501 Parts Catalog – Factory OEM Specifications

If you’ve ever ordered a part for a Dynapac CC501 vibration roller and ended up with the wrong component because some aftermarket catalog had a fuzzy drawing, you know the waste of time and money. That’s exactly why this Parts Catalog exists – 158 pages of exploded diagrams and part numbers straight from Dynapac’s engineering team. No reprints, no guesswork. You get the same book the dealer’s parts counter uses.

Engine Group (Motor) – Full Parts Breakdown

Page 30 of the catalog kicks off the Engine section for the Cummins 6CT 8.3 diesel. You get every gasket, piston ring, injector line, and bolt with the correct Dynapac part number. The exploded view shows how the fan hub aligns with the alternator bracket – stuff you’ll never find in a generic manual. If you’re swapping a head gasket or chasing an oil leak, this group saves you from ordering the wrong $400 part.

Transmission (Kraftöverföring) – Gears, Shafts, and Hoses

Group 40 covers the Transmission – the pump drive, final drive, and all the hydraulic lines that feed the drums. The drawing separates the charge pump from the propel pump so you can identify which seal kit you need. Dynapac CC501 Parts Catalog – OEM Factory Spec for Vibration Roller is the only source that shows the correct number of shims for the drive axle. Aftermarket catalogs often skip the shim count entirely.

Does This Catalog Include the Electrical System?

Yes, Group 60 (“Elektrisk utrustning”) is the Electrical section. It maps the wiring harness, starter, alternator, and the vibration control solenoids. You’ll see each connector and the correct wire color – not the faded photocopy some third-party seller sends. If you’ve ever traced a short in a CC501, you know the factory layout is worth the price of the manual alone.

Frame and Drum Sections – Structural Parts Identification

Group 10 (Ram/Frame) and Group 20 (Vals/Drum) detail the main chassis and the eccentric weight housings. The drum group shows the bearing sets, seal rings, and the vibration motor mounting plate. Torque values are listed in the bolt callouts – something aftermarket books never bother with. Page 3 of the catalog shows the group index, so you find the drum section in seconds.

Decals and Standard Equipment – Don’t Skip These Groups

Groups 80 and 90 list decal kits and standard equipment – safety labels, control symbols, and the tool kit contents. A missing decal from the operator platform might seem minor, but when an inspector flags your machine, you’ll want the correct part number. Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec covers a different model but follows the same numbering logic. For the CC501, the numerical register (Group 100) cross-references every part number to its page – no guesswork.

Source Validity – OEM vs Aftermarket Documentation

This is an original Dynapac publication, not a scan from a third party. The Automotive Industry Overview may give background on manufacturing tolerances, but only the factory catalog guarantees the parts match the S/N range *610*001* and up. Aftermarket books re-number parts to avoid copyright – that gets you a box of wrong bearings.

FAQ

Will this catalog help me identify a part for a CC501 with serial number below 610001?

This edition is valid from S/N *610*001*. Earlier machines may have different part numbers. Check the serial plate on the frame before ordering.

Does it include optional equipment (Group 91)?

Yes. Group 91 lists optional equipment like the water spray kit and halogen lights. Each option has its own exploded view and part numbers.

When you need to rebuild the vibration drum or track down a hydraulic leak, having the factory exploded view in front of you cuts the job time in half. Access the Factory Manual now – it’s a PDF that works on any tablet or phone in the shop.

Related Manuals

• Dynapac CC501 Parts Catalog – OEM Factory Spec for Vibration Roller
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer