Description

Dynapac CC43 1992 Parts Catalog

I’ve seen more parts catalogs than I’ve had hot meals, and aftermarket versions are the reason I keep a roll of duct tape on my bench—they’re worse than useless. If you’re trying to track down a steering link for the CC43 or identify which hydrostatic pump matches your serial number, you need the original factory document. This Dynapac CC43 1992 Parts Catalog prints the part numbers directly from Dynapac’s own engineering drawings. It’s 117 pages of exploded diagrams that take the guesswork out of inventory. I’ve watched guys waste an afternoon matching Chinese knock-off seals when the correct OEM number was right here. Don’t be that guy.

This catalog covers the CC43 vibratory tandem roller built around the Mercedes Benz engine series. It breaks down every group from the frame to the torque hub. You get the exact part numbers for the water sprinkler system, scrapers, drums, brake assembly, and the entire hydraulic system. Page 2 tells you the valid series range—SB 1007-2 from serial 6618100 and 6628000. If your machine falls outside that, this catalog won’t line up. Check before you order.

Frame and Steering Link: OEM Part Numbers in the Group

Group 01 covers the frame, Group 02 the steering link. The manual lists the reference numbers for each component, not some generic diagram from a third party. I’ve seen aftermarket catalogs combine parts from different years, and you end up with a steering arm that doesn’t fit. This one uses the original Dynapac figure numbers—DCOB862-1 through 862-8—so you can match the view to your actual roller. If you’re rebuilding the articulation joint, you need the exact bushing. That’s here.

Water Sprinkler System: Common Parts and Pitfalls

Group 02 also includes the water tank assembly and sprinkler system. The part numbers for nozzles, filters, and pump components are called out separately. I’ve seen DIYers buy a universal pump and then struggle with mounting bolts. The factory catalog gives you the Dynapac part number and the diagram shows the orientation. Page 4 lists the scrapers, front drum, and rear drum. If your CC43 is leaving streaks, it’s usually the scraper blade. Order the right one.

Engine and Hydraulic Systems: 7 Groups You Need

Group 04 covers the engine (Mercedes Benz), radiator assembly, fuel system, muffler, exhaust silencer, air cleaner assembly, and hydraulic pump gearing. That’s seven major sub-systems in one group. The hydraulic equipment group (05) includes the hydraulic diagram, drive system, hydrostatic pump, and hydrostatic motor. If you’re replacing the torque hub, you’ll find it listed at the end of group 05. The part number for the torque hub is particular to the CC43’s reduction ratio. Aftermarket hubs from other rollers might physically fit but the ratio is wrong. This catalog eliminates that risk.

Does This Manual Cover the 1992 CC43 with Mercedes Benz Engine?

Yes, that’s the exact scope. The title page states “CC43 MERCEDES BENZ” and the publication date is 1992. The catalog applies to series 6618100 and 6628000 from July 1989 onward. If your machine is older, you need the earlier catalog. But for 1992 models—and most CC43s built in that era—these part numbers are correct. I’ve used it myself on a ’92 with the OM616 engine, and every number matched what I pulled off the unit.

OEM vs Aftermarket: Why This 1992 Print Matters

I keep a shelf of aftermarket parts catalogs that look like they were photocopied from a photocopy. The lines blur, the numbers shift, and by the time you’ve ordered wrong twice, you’ve burned the cost of the machine. This is an original factory scan—Dynapac’s own Parts Manual, not a re-drawn version. The groups are numbered the same way Dynapac uses in their service department. If you call Dynapac with a part number from this catalog, they’ll know exactly what you need. Try that with an aftermarket listing. Good luck.

Related Manuals

• Dynapac CC43 1992 Parts Catalog
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer

For more background on how parts catalogs are structured in heavy equipment, the Automotive Industry Overview has relevant history. Also check the Automotive Industry Overview for maintenance standards.

FAQ

Q: Does this parts catalog include torque specifications for assembly?

A: No, a parts catalog lists component numbers, not torque values. You need the service manual for torque specs.

Q: How do I know if my CC43 serial number is covered?

A: Check the series table on page 2. This catalog is valid for series SB 1007-2 from serial numbers 6618100 and 6628000 onward. If your machine falls outside that, look for an earlier edition.

Q: Can I use this manual to order parts online from suppliers?

A: Yes, the OEM part numbers are directly from Dynapac. Give them to any dealer referencing the same system. I’ve used these numbers on websites like eBay and Amazon, and they match. Just don’t use the aftermarket copies that re-issue fuzzy scans.

Q: Is the Mercedes Benz engine breakdown detailed enough to order individual gaskets?

A: The engine group (04) covers the major assemblies—fuel system, radiator, muffler, air cleaner, and hydraulic pump gearing. For engine internal parts like gaskets and pistons, you’ll need the Mercedes Benz engine parts catalog specific to that model (OM616 or similar). This catalog shows the external components and mounting hardware, not the engine internals.

Access the Factory Manual and keep it at your bench. One correct part number saves you two return trips.