Dynapac CC100 1999 Parts Catalog – 130 Pages of OEM Specs

Description

You’ve got a Dynapac CC100 1999 Parts Catalog in front of you. Not a photocopy. Not a scan from a scan. A real, factory-issued spare parts catalogue from Svedala Dynapac. I’ve been turning wrenches for 28 years, and nothing burns my time faster than ordering the wrong part because somebody used a third-party list. This book fixes that. 130 pages of exploded views, part numbers, and the exact ordering info you need to get the right piece the first time.

Dynapac CC100 Parts Breakdown: What You Get

Every section in this catalogue is laid out like a professional shop drawing. You get the roller serial number range (page 3 tells you which serial numbers this edition covers), then each assembly is shown with callouts. The part number, the denomination, the quantity. No guessing. On page 4 you’ll find the ordering instructions in six languages – they want your machine type, serial number, quantity, part number, denomination, and dimensions if it’s a cut-to-length item. That’s the standard for a reason: mistakes cost money and downtime.

Order Parts the Right Way – Use the Factory Method

I’ve seen guys walk into a dealer with just a description and get handed the wrong filter bracket. This manual eliminates that. You match the part number from the exploded view to the list below it. The notes column on page 5 flags changes and special remarks. Pay attention to the dots next to items – those indicate notes at the bottom of the parts list. If you skip that step, you’ll end up with a part that doesn’t fit your CC100’s revision level.

Why OEM Documentation Beats Aftermarket Copies

Aftermarket parts catalogs often combine multiple model years into one volume, dropping details specific to your 1999 roller. This is factory-issued for the CC100 with the SCC100-1EN1 catalogue code. The original printer in Sweden (Svedala Compaction Equipment AB) reserved the right to change specifications. You need that nuance – a changed bolt thread or a revised bearing count can wreck your rebuild. Dynapac built this machine to last, and only an OEM manual gives you the exact specs they used on the line. For comparison, check the Dynapac CC100 Spare Parts Catalog – same factory source.

130 Pages of Factory Drawings

That’s not filler. Every page has an illustration and a corresponding parts table. You’ll see groups like the vibratory system, frame, engine mounting (Isuzu diesel, listed on page 3), and electrical. The catalogue is indexed by group number – look up the group, find the picture, order the part. No swap-meet guesswork. Need a hydraulic hose? The drawing shows the routing and the exact length. That’s the kind of detail that keeps your roller running instead of waiting on a mis-shipped hose.

Does This Manual Cover Your CC100 Serial Number?

Open to page 3. The catalogue issue date is 1999-07, and it’s valid for serial numbers from 60750102 onward. If your roller has an earlier number, you need a different edition. This matters because Dynapac updated parts mid-production. I’ve had guys complain that a part didn’t line up – nine times out of ten, they were looking at the wrong serial range. Verify before you order. You can also browse the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec or the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer if you run a mixed fleet.

Real-World Use for the Home Shop and the Crew

A DIY equipment owner with a CC100 needs this to keep the roller going without dealer markups. A mechanic on a job site needs it to get parts ordered before lunch. The manual doesn’t care if you’re a beginner or a veteran – it gives you the data straight. Safety warning: always use OEM-grade fasteners and torque specs when reassembling. This catalogue won’t list torque values (that’s in the service manual), but it will give you the exact bolt part number so you source the correct grade. Don’t substitute. If you need more context on how OEM documentation fits into the wider industry, read the Automotive Industry Overview for background on quality standards.

Can I use this manual for the CC100’s engine?

Yes, it covers the Isuzu diesel. Page 3 lists engine details.

How do I ensure I order the right part from the catalogue?

Start by confirming your roller serial number matches the range on page 3. Then find the correct assembly group – for example, the vibratory system is a separate group. In the parts list, match the item number from the drawing to the table. Write down the part number exactly as printed, including any suffix letters. Include the denomination if required. If the part is sold per meter (like a hose or seal), specify the length in millimeters. Use the remarks column (page 5) to check for superseded parts – if a note says ‘use item 12 instead of 10’, follow it. Call your dealer with all six pieces of information from page 4. That’s the factory method, and it works every time.

You need parts to stay in spec. You need a catalogue that doesn’t cut corners. Access the Factory Manual and put these drawings on your bench – your CC100 will thank you.