Description

Dynapac CC 40 Parts Catalog

I’ve seen guys order the wrong water pump for a Deutz FOL 912 because they looked at a third-party parts list. That’s money down the drain. This Dynapac CC 40 Parts Catalog is the factory book from Vibro-Verken, 138 pages long, and it’s what I’d use if I had a CC 40 roller come into my shop. You don’t guess part numbers with this. You look them up.

Each section is laid out with Fig. and Page references so you can cross-check the exploded view against the part number table. The catalog covers the exact machine starting from roller number 495522. If your machine falls in that range, this is the document you need.

Dynapac CC 40 Parts Catalog: What You Get

The catalog breaks down every major assembly. You get the General view (section 100), Frame, scuttles and seat (200), Engine and fuel system (300) – that’s the Deutz FOL 912 parts. Sprinkler front and rear (400, 500), Scrapers (600), Drum and drum gear box (700), Hydraulic steering (800), Power train (900). Each one has its own figure and page number so you jump straight to the right diagram. No flipping through generic illustrations.

Engine and Fuel System: Section 300 Breakdown

Section 300 runs from page 14 and covers the motor and fuel system. That includes injectors, fuel lines, filters, and all engine gaskets. If you need to replace a cylinder head gasket or the fuel lift pump, this is where the factory part numbers live. The catalog uses the original 9-digit code system that Vibro-Verken introduced in 1970. Don’t try to cross-reference an old 6-digit number without this book.

3 Critical Systems to Verify Before Ordering

First, the hydraulic diagram (section 1300) and wiring diagram (1400) – these are not just schematics. They list the specific part numbers for hoses, fittings, and electrical components. Second, the vibration control section (1800) and brake section (2000). Third, the speed range selector (2100) and forward-reverse control (2200). Ordering a wrong solenoid for the vibration engagement can cost you a day of downtime. This catalog eliminates that.

Why the Wiring Diagram Matters (Section 1400)

Page 71 in this catalog shows the wiring diagram. If you’re chasing an electrical problem – alternator, starter, or a short in the instrument cluster – you need the correct connector part numbers. Aftermarket diagrams often swap wire colors or use generic symbols. This one is factory. It lists the electric equipment (section 1500) and battery (1700) separately. The battery section includes the hold-down parts, cables, and terminal numbers.

Get the Correct Part Number: Hydraulic and Vibration Sections

Section 1000 covers both rear drum vibrating system and hydraulic tank (page 49) and front drum vibrating system (page 50). The hydraulic diagram on page 69 (section 1300) gives you the pump, motor, and valve details. If you need a new hydraulic filter or a seal kit, those part numbers are listed with the figure callouts. The same goes for the gear box section (1200) and transmission (1100).

I trust Dynapac‘s factory documentation because they built the machine. For background on construction equipment standards, see the Automotive Industry Overview.

FAQ

Does this catalog include torque specs?

No, it’s a parts catalog, not a service manual.

What engines are covered in the Engine and Fuel System section?

Section 300 covers the Deutz FOL 912 engine and fuel system components. It includes exploded views with all part numbers for injectors, fuel lines, filters, and engine gaskets. If you need to order a fuel pump or a cylinder head gasket, this is where you find the exact factory number. The manual was valid from roller number 495522, so verify your machine’s serial number before ordering parts.

Access the Factory Manual and keep a copy on your shop tablet. When a CC 40 shows up with a hydraulic leak or a dead vibration system, you’ll have the part numbers in seconds instead of chasing aftermarket catalogs. This is factory data from 1970 – still the most accurate source for your roller.

Related Manuals

• Dynapac CC 40 Parts Catalog – Factory OEM Spare Parts List (138 Pages)
• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer