Description

Dynapac CA302D Parts Catalog – 384-Page OEM Spare Parts Manual

You’ve got a CA302D down in the pit, and you need a new hydraulic pump bracket or a filter head gasket. You pull up a third-party parts list, cross your fingers, and hope the number matches. That’s how you end up with the wrong part, a dead machine for another week, and a pissed-off operator. I’ve seen it happen more times than I care to count. That’s why the Dynapac CA302D Parts Catalog from the factory matters. It’s 384 pages of nothing but OEM exploded diagrams, genuine part numbers, and ordering instructions straight out of Karlskrona, Sweden.

OEM Exploded Diagrams and Part Numbers

Every assembly in this catalog is drawn out with each component called out by its factory part number. Need the isolation mount for the vibration system? Flip to the frame section and you’ll see the exact bracket, rubber isolator, and bolt – each with a 6-digit part code. The manual groups parts by system: engine, drive, vibration, steering, electrical, frame, and hydraulic. No guesswork. If you’ve got the serial number of your roller, you cross it with the issue table on page 3 of the PDF to make sure you’re using the right edition for your machine.

What Serial Number Range Does This Cover?

This Dynapac CA302D Parts Catalog applies to rollers from serial number *68410303*- and later, with the DEUTZ BF4M2012C diesel engine. The cover page lists catalogue issue SCA302D-2EN5, dated 2008-09. If your machine is older, check the serial number against the revision history printed on page 3 – there are earlier editions (EN1 through EN4) that might be needed. If you’re ordering parts, you must provide the type of machine, roller serial number, quantity, part number, and part denomination. That list is printed on page 4 in five languages so the warehouse guy can’t screw it up.

384 Pages for the CA302D – No Missing Sections

I’ve seen aftermarket parts catalogs that skip the electrical harness or combine multiple models into one vague PDF. This one doesn’t. 384 pages covering every nut, seal, hydraulic hose, and control lever. The manual even includes dimensions for items sold by length – like hose or wire – so you order the right meterage. If you’ve ever wrestled with a generic parts book that shows a “similar” bracket that doesn’t fit, you’ll appreciate having the factory drawing. This catalog is the same document the Dynapac dealer uses. Dynapac themselves published it, part of the Atlas Copco Group.

Order Spare Parts the Right Way

When you call the parts counter, they’re going to ask for the roller serial number. If you don’t have it, they’ll guess and you’ll get the wrong stuff. This manual teaches you exactly what info to have ready: 1) machine type, 2) serial number, 3) quantity, 4) part number, 5) part denomination, 6) dimensions if applicable. That’s it. No running back to the shop because you forgot to write down the part number from a smudged tag. The exploded diagrams are clear enough that even a green mechanic can point to the right component and hand the parts man the correct number. DYNAPAC CA302D 2011 Parts Catalog covers later revisions, but this 2008-09 edition is the one you want for the common BF4M2012C engine.

Deutz BF4M2012C Engine: Included Sections

The engine breakdown covers the fuel injection pump, injectors, cylinder head, oil cooler, and turbocharger components. If you’re rebuilding the block or just swapping a glow plug, the part numbers are there. The vibration system section shows the eccentric weights, bearings, and housing seals. Hydraulic section includes the pump, control valve, and motor groups. Every part that moves or wears is listed with a factory number. No aftermarket substitutes, no “equivalent to” nonsense. Automotive Industry Overview might not cover compaction equipment, but the same principle applies: use the factory data or waste money.

FAQ – Common Questions About This Parts Catalog

Does this manual include repair procedures?

No. This is strictly a parts catalog: exploded drawings, part numbers, and ordering info. For service and repair, you need the separate workshop manual.

Will this work for a CA302 with a different engine?

The catalog is built specifically for the CA302D with the Deutz BF4M2012C. If your machine has a different engine (e.g., Cummins), you need a different parts book. Check the serial number range on page 3.

Can I use this to identify parts on a 2005 model?

The first edition of this catalog (SCA302D-2EN1) was issued in 2003 and replaced by later revisions. The EN5 edition you are looking at applies to serial numbers from *68410303*- onward. If your machine is earlier than that serial, you may need the EN4 edition. However, many components are shared across revisions – just double-check the exploded diagram for your specific assembly. If the part number matches the diagram, it will fit.

How do I know if a part is discontinued?

The catalog does not flag discontinued items. You will need to contact your Dynapac dealer with the part number to check availability. The manual is the source for the correct number – the dealer can tell you if it’s still stocked.

If you’re tired of ordering parts blind, stop guessing. This Dynapac CA302D Parts Catalog gives you the factory view of every assembly on the roller. 384 pages of OEM drawings and genuine part numbers. Dynapac CA302D Parts Catalog will save you the headache of returns and downtime. Dynapac CA302D Parts Catalog – 384-Page OEM Spare Parts Guide is the same document. Access the Factory Manual directly from AutoRepairManuals and start ordering parts with confidence – the kind that comes from having the actual factory print in your hand.