Description

Dynapac CA260-IIPD 2011 Parts Catalog – When You Need the Right Part Number

I’ve spent enough Saturdays watching guys order the wrong hydraulic motor because they guessed at the part number. You don’t guess on a CA260-IIPD. That roller has a Dynapac CA260-IIPD 2011 Parts Catalog for a reason – it gives you the exact Dynapac factory code, the exploded view, and the service kit intervals so you don’t end up with a drum gear that doesn’t match your serial number range. This is the same 232-page binder that dealers use. No aftermarket re-hash. Automotive Industry Overview might tell you about trends; this catalog tells you which o-ring goes on the vibration pump.

Service Kits – 50, 500, and 1000 Hour Intervals Listed

Right in the Table of Contents, you get three service kit part numbers: 4700945847 (50 h), 4700950324 (500 h), and 4700945848 (1000 h). Each kit’s exploded view shows every filter, seal, and belt. If you’re flipping through a third-party site, good luck matching those numbers. This catalog lays them out by interval so you can bulk order without cross-referencing three different spreadsheets.

Engine Section – Cummins QSB 6.7C Breakdown

The Engine chapter splits the Cummins QSB 6.7C into sub-systems: cooling system (radiator), combustion air system, fuel system, exhaust system. Need the fuel injector part number? It’s in the fuel system subsection with the Dynapac number and Cummins base number. The OCR excerpt confirms the roller serial number range – 10000111x0D007690 – so you know exactly which revision of the engine mounts you’re looking at. No guessing if your CA260-IIPD has the updated radiator bracket.

3 Reasons to Order Parts from This Catalog Instead of a Generic List

First, the part number is cross-referenced to the Dynapac drawing. Second, the “Class code” (A, B, C) tells you how fast that part moves – A means high turnover, C means special order. Third, the numerical index at the back lets you find any part number in seconds. A generic parts list won’t tell you that the drum gear 4700380462 fits only rollers after serial 0A005601. This catalog does.

Hydraulic System – Propulsion, Vibration, Steering

The hydraulic section has five sub-systems: front propulsion (motor 4700371509), rear propulsion (pump 4700380830 and motor 4700375999), vibration system (motor 4700380145 and pump 4700383958 with rotary group 4700937167 and valve block 4700937168), steering (valve 4700376000 and cylinder 4700392002), and brake system. If you’re rebuilding the vibration pump, you get the exploded view of the rotary group and the valve block separately. That means you can order just the valve block if the rotary group is still good, saving you the cost of a whole pump assembly.

Does This Manual Cover the Electric System and Cab Options?

Yes – the Electric system chapter lists control panel, working lights (multiple options including ROPS and cab versions), rotating beacon, back-up alarm, compaction meter, engine pre-heater, and direction lights. The Drivers platform section includes cab 4700392479 with door, screens, wiper, and even the rearview mirror. The cab electric subsection shows the wiring harness paths. If you’re retrofitting a beacon or adding a heater, the part numbers for the condensor assembly 4700383413 and heater box 4700379394 are right there.

Source Authenticity – OEM Dynapac, Not a Reprint

This PDF is a direct scan of the official Dynapac spare parts catalogue (SCA260PD-US5EN1), dated 2011-01. The page 2 order form tells you exactly what info to give the dealer: machine type, serial number, quantity, part number, denomination, dimensions if ordering per length. That alone eliminates returns. Compare that to aftermarket “compilations” that mix up metric and imperial threads or leave out the class code. You’re paying for accuracy, not paper.

FAQ

Can I use this catalog to find parts for my CA260-IIPD built before serial 0A005601?

No. The catalog is valid from serial 10000111x0D007690 and covers rollers from 0A005601 onward. Earlier machines have different drum and engine configurations.

What if I need a part number that isn’t in the numerical index?

Check the exploded view pages. Every assembly (e.g., rear axle limited slip 4700383857 or no-spin 4700383856) has its own drawing with callouts. If the part isn’t listed under that assembly, it may be a special-order item not shown – contact Dynapac with your serial number. The catalog gives you the exact structure so you can tell them “I need the planet gear from the limited-slip differential, part number from page 73.”

Look, you’re not buying this catalog to read on the couch. You’re buying it because the weekend is short and the roller is down. Every page is a direct link from the drawing to the part number – no translation errors, no “equivalent” that doesn’t fit. If you want to stop wasting time on returned parts and get the CA260-IIPD running again, Access the Factory Manual now.

• Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec
• Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer
• Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings