Dynapac CA134PD 2009 Parts Catalog – 165 Pages of OEM Specs

Description

If you’ve ever ordered a part for a Dynapac CA134PD and got the wrong gear, seal, or hydraulic line because the aftermarket diagrams were fuzzy or wrong, you already know the problem. This 2009 Parts Catalog is what the dealer uses. The same one that tells you exactly which part number goes with which serial number range. 165 pages of factory drawings, no guessing.

Ordering Spare Parts: The Six Critical Fields

Page 4 of the catalog lays out the six pieces of information you need when ordering. Machine type, roller serial number, quantity, part number, part name, and dimensions (if it’s a cut-to-length item). I have seen guys skip the serial number and get a $600 hydraulic motor that doesn’t fit. This catalog makes it impossible to mess that up if you read the instructions once. The page even includes the suggested format in English, Swedish, German, Italian, Spanish, and French. That’s how thorough the OEM original is.

Engine and Serial Number Cross-Reference

Page 3 shows exactly which diesel engine this CA134PD carries: a John Deere 5030HF285. The catalog was published in 2009 and replaces the prior edition SCA134PD-US3EN1. It also lists the valid serial number range starting from *8137US5400*. If you have a machine outside that range, you need the 2011 update. The catalog’s Dynapac CA134PD Parts Catalog will walk you through the exact group numbers that changed between revisions.

Exploded Diagrams: Why Factory Originals Matter

I’ve used aftermarket “reprints” that looked like someone photocopied a photocopy. You lose the fine line weights and callout numbers. This OEM catalog prints every group page with clear parts indexes. The notes section on page 5 explains how to read the remark codes at the bottom of each parts list. That is the kind of detail that saves you a return shipment and a week of downtime. The Dynapac factory service bulletins are referenced throughout, so you know the part supersessions are current as of 2009.

3 Reasons to Choose This OEM Parts Catalog

First: you get the exact part numbers Dynapac stamped on the crate. Second: every diagram corresponds to a specific group number—no hunting through generic illustrations. Third: the ordering procedure on page 4 is the same one your local dealer follows. If you walk in with the part number from this catalog, they hand you the box. No extra questions. Compare that to a third-party database that might merge two different rollers. The DYNAPAC CA134PD 2011 Parts Catalog is the next revision if you need newer serial number coverage.

Does This Catalog Cover Repairs or Only Parts?

This is a Parts Catalog, not a service manual. It does not give you torque specs, hydraulic pressure settings, or electrical diagnostics. What it does give you is every piece—from the vibratory exciter to the cabin latch—with a part number and a reference to the exploded view. If you’re doing a teardown, you will want the service manual alongside this. The DYNAPAC CA134PD Spare Parts Catalogue SCA134PD-1EN1 is an earlier version; check your serial number before you buy.

FAQ

Can I use this catalog to find hydraulic filter numbers?

Yes, hydraulic filters are listed under the hydraulic system group. Find the group number on the diagram, match it to the parts list, and order the Dynapac OEM number.

Does it include engine internal parts for the John Deere 5030HF285?

No. This catalog covers the Dynapac-specific components: the roller frame, vibratory system, cab, and chassis. The engine is a John Deere unit; you need the separate John Deere parts catalog for pistons, rings, and bearings.

What do the remark codes mean?

Page 5 explains the notes structure. Remarks like “3” or “1” refer to footnotes at the bottom of the page—usually design changes, superseded parts, or special order items.

Is this the same as what the dealer prints?

Yes. It is the exact PDF that Dynapac released to dealers. The file name DYNAPAC_CA134PD_2009_Parts_Catalog_en-26114013605.pdf confirms it’s the official English version.

You need the right part the first time. I have seen too many jobs sit because someone ordered a seal by eye instead of by book. Get the factory information on your workbench. Access the Factory Manual.