Description

Dynapac CA 141 D, CA 141 PD Parts Catalog

If you’ve ever ordered a replacement part for a Dynapac roller only to find the bolt holes don’t line up, you know the pain. That’s why you need the factory parts catalog, not some aftermarket compilation. This is the Dynapac CA 141 D, CA 141 PD Parts Catalog — 150 pages of exploded diagrams, group numbers, and exact part numbers straight from Metso Dynapac. It comes with the ordering checklist from page 4: machine type, serial number, quantity, part number, denomination, dimensions. Miss one of those and you’ll be waiting another week for the right piece.

Ordering Spare Parts: The 6-Step Process

Page 4 spells it out in six languages, but the procedure is the same. You need the roller serial number from the frame plate, the part number from the diagram, and the quantity. The catalog organizes everything by group number — each group covers a system like the engine, vibration, or frame. Without following these six steps, you’re gambling with your time and money. I’ve seen guys write down a part number from a worn-out part and order it, only to get the superseded version. The factory catalog includes the latest revisions.

Dynapac CA 141 D/PD Parts Catalog: What’s Inside

This Dynapac CA 141 D/PD Parts Catalog covers both the CA 141 D and the CA 141 PD vibratory rollers. It includes the John Deere diesel engine variant, with serial number ranges listed on page 3. The publication history shows this is issue SCA141D-1EN3, superseding earlier versions. Every part number is tied to a specific group and diagram. No cross-referencing to third-party databases — this is the original OEM data. If you also work on cold planers, check the Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec for similar detail. For the PL2000LS, the Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer is the matching document.

Why Rely on the Factory Parts Catalog?

Aftermarket parts catalogs often reuse old part numbers or substitute cross-references that don’t match later production changes. I trust the Dynapac factory documentation because it comes direct from the manufacturer — same drawings, same revision control. Page 4 of this catalog includes the ordering form you need to fill out for your dealer. Use it, and you eliminate the guesswork. For background on how construction equipment documentation standards evolved, see this Automotive Industry Overview.

Check Your Serial Number Before Ordering

Page 3 has a table of catalogue issues and valid serial numbers. For CA 141 D/PD rollers with John Deere engines, the serial range runs from *60410141* to *60410500*. If your roller falls outside that range, you need a different catalog issue. Skipping this step is the number one reason for wrong parts. The group index on page 5 shows how the catalog is organized — each group page lists the parts service info and any change notes. Learn to read that, and you’ll never order a bearing that doesn’t fit the drum.

Reading the Catalog: Group Numbers and Page Structure

The catalog groups components by function. On page 5 you’ll see a placeholder for group and page numbers — the actual content uses a three-column layout: group, page, notes. Each group corresponds to a subsystem (e.g., hydraulic system, frame, vibration). When you flip to a group page, you get an exploded view of the assembly with callout numbers. The parts list beside it gives the part number, description, and quantity. No torque specs here — this is strictly a parts manual. But if you need repair procedures, the service manual is what you pair with this catalog.

Does this catalog include torque specifications?

No. This is a parts catalog, not a repair manual. It lists part numbers only.

How do I find the correct part for my roller?

First, locate the roller serial number on the frame plate. Then refer to page 3 of the catalog to confirm your serial number falls within the valid range for this issue. Next, find the system group (e.g., engine, vibration) by looking at the group index on page 5. Each group has exploded diagrams with callout numbers. Note the part number from the diagram, then verify it against the order form requirements on page 4: machine type, serial number, quantity, part number, denomination, and dimensions. Double-check the part number with your dealer if unsure. This procedure eliminates wrong orders.

Stop wasting time on wrong parts. If you maintain a Dynapac CA 141 D or CA 141 PD, you need this factory catalog on your workbench. Access the Factory Manual now.