Description

Dynapac SD2530CS 2015 Parts Catalog – Stop Guessing, Start Ordering Right

You’ve got a Dynapac SD2530CS paver down because an auger wing is shot. You pull up some aftermarket parts list and the number doesn’t match your serial break. Now you’re stuck waiting on the wrong part, burning billable hours. I see this at my shop twice a month. The fix is the factory Parts Catalog – 850 pages of actual OEM exploded views, not some scanned reprint from a third party. This is the same document Dynapac dealers use to order parts. Every nut, bolt, and subassembly has a Dynapac part number. No guesswork. No returns for wrong parts.

Covering Isoliert (A) and (B): Left-Hand and Right-Hand Air Guide Differences

One area that trips up techs is the insulated covering on the SD2530CS. The catalog splits it into two sections: Covering Isoliert (A)(To) and (B)(From) based on the paver’s serial number. On page 71 you’ll find the air guide, r.h. (part 4812034771), and on page 79 the air guide, l.h. (4812034770). Support plates, retainers, hood fasteners – every piece is exploded with callouts. If you order the wrong side, you’re eating the cost. This catalog kills that problem.

Main Frame and Side Arm Guiding: Splash Guard and Steering Guide Part Numbers

The main frame section lists the complete frame assembly (Main frame, cpl.) and three critical subassemblies: side arm guiding (4812028721), splash guard (4812028725), and steering guide (4812036083). Each has its own exploded diagram. You can cross-check wear on the steering guide without tearing down the whole frame. I’ve seen techs try to order a generic steering guide and find it doesn’t fit the SD2530CS track width. Factory part numbers eliminate that pain.

3 Wear Part Kits That Save You from Repeated Orders

The catalog dedicates a whole section to wear part and inspection kits for TIER3 engines. You get part numbers for conveyor chain kits, conveyor plate kits, conveyor guide plate kits, conveyor drive kits, reversing roller kits, and the auger wing kit (4812027478). Each kit includes every fastener and component needed. Order once, install, and move on. No piecing together parts from different sources. For the conveyor turn assembly, you also get the tensioner (4812026815) and chain guide (D635060800A).

Dynapac SD2530CS 2015 Parts Catalog: What’s Inside the 850 Pages?

Every mechanical system is covered: main frame, conveyor (double number of bars and standard), hydraulic push roller (with two serial breaks – To and From), hopper (left and right hand with bulk material flap and hopper lock), covering isoliert with all doors, hood center parts, and isolation. The auger section splits into Ø380mm basic width with auger box, supports, and gear. You also get service, repair, and wear part kits up front. Total pages: 850. Published 2015 by Dynapac (China) Compaction & Paving Equipment Co., Ltd.

Order the Correct Part for Your Serial Number Break

The hydraulic push roller section shows two different assemblies based on serial number: To 10002121K0C002520 / 10002119E0C001787 and From those numbers. Each has its own pillow block, control block, and hydraulics. Miss the break and you’ll order a push roller that won’t bolt up. The catalog gives clear callouts on page 39 and page 47. Use your machine’s serial, match the break, and order with confidence.

FAQ – Common Questions About This Dynapac Parts Catalog

Does this manual include repair procedures or torque specs?

No. This is a parts catalog, not a service manual. It contains exploded views, part numbers, quantities, and ordering info. For repair steps and torque values, you need the factory service manual. The catalog is meant to get you the right parts, not to guide the repair.

What serial number range does this catalog cover?

It covers the SD2530CS (IIIA/T3) with engine Cummins QSB6.7-C190, serial numbers from 10002121E0C001895 onward. Two distinct serial breaks exist for the hydraulic push roller and the covering isoliert, both documented inside.

Are aftermarket part numbers listed?

No aftermarket numbers. Only OEM Dynapac part numbers. That’s the whole point. If you need a cross-reference to a generic bearing or seal, you’ll have to source that elsewhere. This catalog gives you the exact Dynapac number to order from a dealer.

Can I print pages from the PDF?

Yes, the PDF is not encrypted. You can print individual pages for the workbench. I recommend printing the exploded view for whatever system you’re working on and keeping the rest on a tablet. Saves you from flipping through 850 pages while covered in grease.

I’ve been turning wrenches for 28 years and I’ve seen more paperwork battles than actual mechanical failures. A missing part number costs you time, and time is money. This catalog is the kind of reference I keep in my shop’s tablet – right next to the coffee cup. Pull up the section you need, find the part, call the dealer, and get the paver back on the job. If you want the same simplicity, Access the Factory Manual from AutoRepairManuals today.

Related manuals you might need: Dynapac PL2000LS Parts Catalog (258 Pages) – OEM Factory Spec, Dynapac PL2000LS Parts Catalog – Factory OEM Specs for Cold Planer, Dynapac PL2000LS Parts Catalog – OEM Spare Parts Listings.

Check out the official manufacturer: Dynapac. For general automotive industry context, see Automotive Industry Overview.