Description

Cub Cadet 5264DE Parts Catalog – 77 Pages of Factory Parts Breakdown for the 5264DE Tractor

Been there: you pull a part off your 5264DE, maybe the alternator or a front axle seal, and the old number is smeared or rusted away. You hit three parts houses, get handed something that “looks right,” and then it doesn’t fit. That’s time down, money flushed. This Cub Cadet 5264DE Parts Catalog is the factory document – 77 pages of nothing but OEM part numbers, exploded diagrams, and exact quantities. Not an aftermarket reprint. Not a PDF cobbled from forum screenshots. It’s the same binder the dealership countermen used, with the same distributor contact numbers (606-678-9623 or 606-561-4983) printed right on every page.

Alternator Exploded View – Page 1 and 2

The catalog opens with the alternator assembly. Twenty-seven reference numbers, each keyed to a part number and description: brush end housing (BS-820692), pulley (BS-820711), rectifier (BS-825385), rotor (BS-825390). You get the fastener list – screws, nuts, retaining rings – with quantities and S/P/F codes (service, production, or field). If you need to rebuild the charging system, this is the only source for the correct brush cover, regulator, and adjusting strap. No guessing.

Axle Assembly 4WD – Pages 3 and 4

Four-wheel-drive front axle on a tractor this size takes a beating. Page 3 and 4 lay out the kingpin housings (619-04017A), drop housings (RH and LH), steering arms, gears (13T bevel, 34T bevel, 14T bevel – four of those), seals, and ball joints. Part numbers include the thread direction on the ball joints – RH and LH threads clearly marked. The oil seal sizes are given: 38x55x7 with dirt lip, 35x55x8. You order the exact seal, not a “universal” that weeps after two weeks. If you’ve swapped a kingpin without this sheet, you know the pain.

Parts Catalog vs. Service Manual – What’s Here, What’s Not

This is a parts catalog, so it doesn’t lay out torque sequences or assembly steps. What it does: gives you the factory part number, the quantity per assembly, and the S/P/F code so you know if it’s a service-only item. For torque values on the axle bolts (M10-1.5 x 35 GR8.8, M12-1.75 flange lock nuts), grab the factory service manual. But if you’re ordering parts, this catalog is cleaner than any third-party database. No mismatched supersessions, no “fits multiple models” garbage.

Audience Fit – Who Should Buy This?

Home garage guys who maintain their own 5264DE mowing tractor. Small-engine repair shops that don’t want to eat a wrong part return. Anyone who’s spent a Saturday morning with a micrometer trying to match a bearing to a generic bin at the farm supply. If you can read an exploded diagram, you can order every part on this tractor from page 1 to page 77. The catalog is 77 pages – that’s one part number per page, on average, with detailed callouts.

Source Validity – Only OEM, No Aftermarket

This is a direct scan of the original Cub Cadet publication. The watermark “www.mymowerparts.com” is present, but the content is pure factory. Compare that to a reprint where the resolution is so bad you can’t read the part numbers. Or a knock-off where someone typed the numbers by hand and transposed a digit. I’ve seen both. This catalog is crisp, the numbers are legible, and the diagrams are scaled so you can read the reference arrows. If you want aftermarket speculation, go to a forum. If you want the part that fits, get the factory document.

Is This Manual Compatible with the Cub Cadet 984 or 81 Series?

Different models. This is specific to the 5264DE chassis. For the 984, check Cub Cadet 984 Parts Catalog – 128 Pages of OEM Factory Parts Breakdowns. For the 81 series, see Cub Cadet 81, 21121C290248 Parts Catalog – OEM Factory Breakdown. And if you need the 21121C29025 manual, Cub Cadet 21121C29025 Parts Catalog – 73 Pages of Factory Specs covers that one. Each has its own part numbers – don’t overlap them.

3 Systems Covered in Depth

Alternator charging system – 27 parts with full breakdown. Front axle 4WD assembly – 38 reference numbers including all seals, gears, and steering arms. The catalog also covers engine, drive train, and body panels in the remaining pages. I’m not going to list every table of contents line here, but know that every fastener, every bushing, every washer (.39 x .75 x .062 flat washer on page 4) is accounted for.

Can I order parts directly from this catalog?

Yes. The catalog includes distributor phone numbers (606-678-9623 or 606-561-4983) for discount Cub Cadet parts. You can use the part numbers to order from any Cub Cadet dealer.

Does this catalog include torque specifications?

No. It lists hardware sizes (e.g., M10-1.5 x 35 GR8.8) but not torque values. You need the factory service manual for that. This catalog tells you what to buy, not how tight to turn it.

Will the diagrams work on a phone screen?

Yes, the PDF is scanned at a resolution that lets you zoom in on the reference numbers. I’ve used it on a 6-inch screen in the field – readable.

What if my tractor has a different alternator than shown?

Check the model number on the alternator label. This catalog covers the 5264DE factory configuration. If someone replaced it with a generic, the part numbers won’t match. You’ll need to identify the aftermarket unit separately.

Stop wasting money on parts that don’t fit or waiting for the wrong shipment. This catalog gets you the exact factory part number in minutes, not days. Access the Factory Manual from AutoRepairManuals and keep it on your tablet or printed binder. For more background on why OEM documentation matters, read the Automotive Industry Overview on part standardization – and then get the right part the first time. Automotive Industry Overview provides additional context on factory specification systems.