Description

Condor 58, 68, 76 1996 Operators Manual

If you’re running a Condor 58, 68, or 76 boom lift without the factory Condor 58, 68, 76 1996 Operators Manual, you’re gambling with safety and compliance. I’ve been turning wrenches for 28 years, and I’ve seen too many guys try to “figure it out” on an elevated platform. That’s how you get hurt. This manual is 342 pages of what Condor factory engineers wrote for operators. Page 1 says: “This manual must be retained on the unit at all times.” That’s not a suggestion—it’s a rule. The inspection checklists, control descriptions, emergency lowering procedure—it’s all in here. You don’t guess when someone’s life is on the line.

You need the inspection checklists, the control descriptions, the emergency lowering procedure. Flip to page 4 and you’ll see the table of contents: Preparation, Inspection, and Maintenance starts on page 3; Machine Operation on page 4; Optional Equipment; Auxiliary Lowering; Moving from Job Site to Job Site; Emergency Stopping; and an appendix with decals. Plus the ANSI/SIA 92.5-1992 Manual of Responsibilities is bound in.

Preparation, Inspection, and Maintenance Procedures

This section covers overall machine condition, lower control station checks, platform and upper control station, hydraulic system, multi-axis slope sensor, and battery. Each item has a specific inspection step. You don’t guess whether the slope sensor is working—you follow the procedure. I’ve seen slope sensor failures cause tip-overs. Don’t skip it.

What Does This Condor 58, 68, 76 1996 Operators Manual Cover?

Every model in the 58, 68, and 76 series. The manual is model-specific. Rated work load is listed in the operation section. Upper and lower controls are explained with diagrams. Travel operation (driving the platform) is covered on page 8. Optional equipment like auxiliary lowering is detailed. If you need the service manual for major repairs, check out the TIME CONDOR V14/1833-XL 1998 Operators Manual for a similar platform.

6 Systems Covered in the Operation Section

Rated work load, upper controls (joysticks, switches), lower controls (override functions), travel controls, optional equipment, and auxiliary lowering. That’s six distinct systems. Each has a dedicated subsection with procedural steps. The manual doesn’t assume you know which lever does what.

Get the Emergency Lowering Procedure Right

If the primary hydraulic system fails while you’re 50 feet in the air, the auxiliary lowering system is your only way down. This manual shows the exact valve sequence. Don’t wait for an emergency to learn it. Also, read the towing and transporting section if you move the machine between job sites. It’s different from a Manual Transmission tow—you have to disable certain hydraulic locks.

Decals and ANSI Standards: Factory Safety Requirements

The appendix includes decals illustration—all the warning labels that must be present and legible. The ANSI/SIA 92.5-1992 manual is included. That document outlines responsibilities for employers and operators. If OSHA comes by, you’ll want this paperwork. For hydraulic system maintenance, refer to the separate parts manual or the Manual Transmission section of the machine’s service manual for gearbox oil specs.

Related manuals you might need:

• TIME CONDOR V2033XL V2033 1999 Operators Manual
• Condor T40, T46J 1998 Operators Manual – Factory Specs & Safety

Frequently Asked Questions

What safety information is included?

Covers emergency stopping, auxiliary lowering, and decal meanings.

Does this manual cover repairs and maintenance?

This operators manual focuses on daily operation, inspection, and emergency procedures. It includes preparation and inspection checklists, hydraulic system checks, battery maintenance, and multi-axis slope sensor testing. For detailed repair procedures, you’ll need the separate Condor maintenance and parts manual. The operators manual is meant to be kept on the unit at all times for quick reference by operators. It does not include step-by-step overhaul instructions. However, it does include the ANSI/SIA 92.5-1992 Manual of Responsibilities which outlines safety responsibilities for employers and operators. This is critical for job site compliance.

Which models are covered?

The manual covers Condor models 58, 68, and 76 boom-supported elevating work platforms manufactured around 1996.

Is this a reprint or a scanned copy?

AutoRepairManuals sells only original factory PDF scans, not aftermarket reproductions. This is the genuine Condor document with all original page numbers and illustrations.

Bottom line: if you operate a Condor 58, 68, or 76, this manual belongs in the platform toolbox. Keep it on the machine so every operator has the factory procedures. Access the Factory Manual from AutoRepairManuals today.