Description

Condor V3287G, V4287G 1997 Parts Catalog – OEM Diagrams & Specs

You’ve got a Condor V3287G, V4287G 1997 Parts Catalog sitting in front of you because the lift is down and the wrong part got ordered. That’s the kind of downtime that burns money. I’ve been turning wrenches for 28 years, and I can tell you: guessing on part numbers for aerial lifts is a fast way to double your parts bill. This is the actual factory-issued illustrated parts manual from TIME CONDOR Corporation – June 1997, 105 pages, manual number 92355. Not a reprint, not a scan of a scan. It’s the original OEM documentation.

Let me show you what’s inside, and why you want this on your bench instead of a third-party parts lookup.

What This Parts Catalog Covers

This isn’t a generic list of part numbers. It’s a full illustrated parts breakdown for both the V3287G and V4287G – two similar but distinct self-propelled elevating work platforms. The manual covers the upper controls, lower controls, hydraulic system, drive train, platform assembly, and all chassis components. Each section has exploded-view diagrams with callouts that match the parts list. You get the OEM part number, description, and quantity per assembly. No guesswork.

Need the charge pressure spec? That’s in the operator’s portion, but the parts catalog cross-references assemblies so you can order exactly what broke. Page 1 gives you the manual identification and model serial number break – essential if you’re working on a late-run machine. Page 2 shows the safety alert symbols used throughout. Ignore those at your own risk – I’ve seen lifts come down hard because someone bypassed a limit switch.

Safety First: The Warning System on Page 2

The manual uses the standard ANSI safety alert system: DANGER, WARNING, CAUTION, and CAUTION without the symbol for property damage. These aren’t suggestions. When you’re under a 40-foot boom, a hydraulic hose failure is not a minor event. The factory manual spells out what each symbol means and where it applies. Page 2 has the full legend. Look at it before you start any disassembly.

3 Model Differences You Need to Check

The V3287G and V4287G share many components, but the platform height, drive motors, and some hydraulic fittings differ. This manual gives separate diagrams for each model. If you order a part for a V4287G and try to fit it to a V3287G, it might bolt up – but the pressure rating could be wrong. The OEM part numbers in this catalog are the only way to be sure. Cross-reference the model and serial number from the data plate before you reach for a wrench.

V3287G vs V4287G: Which Diagram Set Do You Use?

Flip to the model-specific sections. The V3287G sections have a header stating “V3287G” in bold. The V4287G sections are labeled similarly. If you try to use the wrong diagram, you’ll order parts that don’t align. I’ve seen mechanics do that and then blame the manual. It’s not the manual – it’s reading the wrong column. The 1997 edition includes both models because the serial number ranges overlap. Easy fix: verify your machine’s serial number against the chart on page 1.

Get the Right Part Number the First Time

When you’re chasing a leaky O-ring or a cracked hydraulic block, you don’t want to call three dealers and get three different answers. With this catalog, you pull the exploded diagram, note the reference number, look up the part number in the list, and order it. That’s it. No cross-shipping returns. No “this looks like it fits” nonsense. The part numbers call out the exact fastener grade, thread pitch, and material. Torque values are not in a parts catalog – that’s in the service manual – but this catalog tells you which bolts to buy and how many.

Related manuals you should consider: TIME CONDOR V2648 V2653 1997 Parts Catalog covers a different platform line. For loading and unloading procedures, check TIME CONDOR V2648 V2653 1997 Parts Catalog – Section: Loading And Unloading. And if you work on boom lifts with telescoping booms, Condor T80 T86J Illustrated Parts Manual shares the same diagram format.

This manual comes from the factory at TIME CONDOR Corporation in Waco, Texas – same people who built the machine. For broader context on the construction equipment industry, see Automotive Industry Overview. That background helps understand why OEM documentation matters more than a generic parts list. Another resource: Automotive Industry Overview.

FAQ – Two Questions You Might Have

Does this catalog include torque specs for bolts?

No. Torque values are in the service/repair manual, not a parts catalog. This catalog gives you the part number and diagram – you need the corresponding service manual for assembly specifications.

Can I use this for a 1998 model Condor lift?

It depends on the serial number. The 1997 edition covers machines built through mid-1997. If your machine was built late 1997 or 1998, there may be running changes not shown. Compare your serial number to the range printed on page 1. If it falls outside, source a later edition or contact TIME CONDOR with the serial and ask for the correct parts list. Don’t assume.

This isn’t a book to read for fun. It’s a tool. You use it to get the right part, get the machine back up, and get paid (or get back to work). 105 pages of factory diagrams and part numbers – no fluff, no ads, no aftermarket guesses. If you maintain Condor lifts, this belongs on your shelf. Access the Factory Manual from AutoRepairManuals and keep your lift running.