Description

Condor V1433XL, V1433, V1833XL, V1833 1997 Operators Manual

If you’re running a Condor V1433XL or V1833 self-propelled elevating work platform built in 1997, you’ve likely run into aftermarket docs that leave out half the pre-shift checks. That’s where this factory Condor V1433XL, V1433, V1833XL, V1833 1997 Operators Manual earns its place on the shop table. 215 pages, bound from CONDOR’s own press in Waco, Texas. No reprints, no guesswork.

4 Main Chapters Plus Appendices

This manual breaks down into four numbered sections: Preparation/Inspection/Maintenance, Machine Operation, Moving Job to Job, and Storage. After that you get an illustrated decal appendix and the full ANSI/SIA A92.6-1990 Manual of Responsibilities. Every section was written for the operator who stands on the platform, not the guy behind a desk. Page 5 spells out deck extension limits and the lift-up entry gate procedure — stuff you don’t want to guess at 14 feet up.

Lower and Upper Controls: Factory Sequence

Section II covers both lower and upper control stations in the order Condor expects you to use them. Emergency lowering is detailed on page 1 of that section, with a separate warning about trapped pressure in the hydraulic system. The removable upper control box procedure (page 5) is something aftermarket manuals routinely mash up with the deck extension — Condor keeps them on separate pages for a reason.

How to Use the Emergency Lowering Procedure

If the platform loses power with a man in the basket, you need the exact valve sequence. This manual walks you through it step-by-step, starting at the lower control panel. It also tells you which decal corresponds to which valve. Don’t skip that appendix (page 8) — the decal illustration saves you a trip back to the cab every time you forget which lever is which.

Get the Right Torque Specs: Factory Data Only

Condor bolts on these machines have specific torque values that aftermarket pamphlets either omit or round off. The maintenance portion of the manual lists each fastener group with its pound-foot reading. Wheel lug nuts, tie-rod clamps, hydraulic fitting nuts — all from the 1997 factory release, not a third-party translation. If you’re rebuilding the drive chain or swapping a battery, those numbers live in Section I (page 1).

ANSI/SIA A92.6-1990: The Responsibility Manual Included

Bundled at the back is the full ANSI/SIA A92.6-1990 standard. That’s the document that lays out who does what on an aerial work platform — owner, operator, lessor. It’s not boilerplate; it’s regulatory text that shops get cited for ignoring. Having it bound into the same manual means you can hand it to an inspector without digging through a filing cabinet.

Loading and Transport: Freewheel Operation

Moving these machines between sites requires the freewheel disengagement procedure. Section III details both ramp and forklift methods. The freewheel valve location and the safety lock-out are described on the same page, so you can’t accidentally roll a powered unit off a trailer. Understanding that drivetrain disengagement works like a Manual Transmission clutch release — you pull, then spin. Refer to a separate Manual Transmission manual for deeper gearbox work, but this factory book tells you what you need for the road.

For other Condor machines, check the Condor V1833XL V2033XL V2048XL 2000 Operators Manual or the TIME Condor V14/1833-XL 1998 Operators Manual – Factory Specs. The TIME CONDOR V2033XL V2033 1999 Operators Manual follows the same format.

Wrap-up: If you’re maintaining a fleet of self-propelled lifts from the late ’90s, this is the only document that matches what Condor shipped with the machine. No reprints, no third-party edits. You can access the Factory Manual directly — search for “CONDOR_V1433XL-V1433-V1833XL-V1833_1997_Operators_Manual_en-17531001462” to pull the PDF and start using it on your next PM cycle.

Does this manual include torque specs for hydraulic hoses?

Yes. Section I lists torque values for all hydraulic fittings, wheel lug nuts, and structural bolts. Values are in pound-feet and come from Condor’s 1997 engineering release. No generic numbers.

What about the ANSI standard — is it the full text or just a reference?

Full text. Pages 9–50 or so contain the complete ANSI/SIA A92.6-1990 Manual of Responsibilities. That includes the owner’s duties, training requirements, and inspection intervals. You can hand it to an OSHA inspector without supplemental documents.