Description

Barber-greene SRG2 1994 Parts Catalog – The Only Factory Parts Book You Should Use

If you’ve ever had a machine down because you ordered the wrong piston or hydraulic fitting, you know the pain. That’s why I only trust the factory parts book. This is the real deal: the Barber-greene SRG2 1994 Parts Catalog, 189 pages of everything you need to identify and order the correct components for your Extend-A-Mat screed. Aftermarket reprints? Forget it. Those get scanned from god knows what, and the part numbers are often blurry or flat wrong. This is a clean scan of the original 1994 Caterpillar release.

Barber-greene built these screeds to a specific standard. When you need a new auger bearing, a wear strip, or a hydraulic hose assembly, you don’t guess. You pull out this catalog, find the illustration, and match the part number. That’s how you keep the machine running and avoid ordering the wrong piece three times.

If you also need the service procedures for the screed, check the Barber-Greene SRG2 SRG1 Service Manual – Factory Specs for Screed. For older Barber-Greene models, the Barber-Greene SA-41, SA41 X 101, SA41 X 868 1971 Parts Catalog covers a different era of machines.

The SRG2 Parts Catalog: What You Get in 189 Pages

This isn’t a generic exploded-view book. It’s the factory Bill of Materials with illustrations keyed to each part number. Every page is from the original 1994 print. You get the full breakdown of the Extend-A-Mat screed: main screed assembly, extension arms, vibrator systems, crown adjusters, and all the hydraulic plumbing. The manual covers serial number SRG2X100 and up. That’s important — if your machine is earlier, you need a different edition.

Part numbers, quantities, and descriptions are listed with reference keys. Footnotess identify supersessions or special ordering instructions. I’ve seen guys try to order from aftermarket books and end up with a part that fit a 1980 model. This book kills that risk.

How to Order Parts Correctly (Read Page 3 Before You Call)

Page 3 of the catalog lays out exactly what the parts desk needs: your order number, machine model and serial number, the part numbers, description, quantity, and the sub-assembly name. If you skip any of that, you’ll get delays. The manual even tells you to group parts by machine if you have more than one screed. That’s the kind of detail you only get from an OEM document.

For repairs, refer to the machine number stamped on the identification plate. It’s shown in the manual so you know exactly where to look. Don’t assume your machine’s model year matches the manual year — verify the serial number.

Bill of Materials and Indentures – Don’t Order from the Wrong List

Page 4 has a warning I wish every lowboy operator would read: this manual’s Table of Contents has been edited to agree with the serial number on the front cover. The Bills of Material that have a check mark (✓) in front of them are the ONLY ones that apply to your machine. DO NOT order from a Bill of Material that does NOT have a check mark. I’ve seen shops ignore that and buy a complete screed extension kit that didn’t fit because they used a list for a different serial range.

Assemblies and kits are shown with indented component parts. If you order the assembly part number, you get all the indented parts. If you need just one component, order by its individual part number. The indention system is clear once you’ve seen it a few times.

For another Barber-Greene machine, the Barber-Greene BG260 Parts Manual covers a different paver family.

Why OEM Documentation Beats Aftermarket Reprints

I’ve torqued enough bolts to know that a blurry photocopy of a reprint will cost you money. The original 1994 Barber-greene Parts Catalog uses crisp line drawings and clear part numbers. The footnotes are legible. The binding is digital, but the content is pure factory spec. Aftermarket sellers often compress pages so badly that reference arrows disappear. This file is a direct scan — no recompression tricks. You get the same quality as the paper manual that cost $150 back in the day.

In the Automotive Industry Overview, parts catalogs like this are the backbone of proper maintenance. The same principle applies to construction equipment: if you can’t read the part number, you can’t order the part. Period.

Does This Catalog Cover Your Machine? Checking Serial Numbers

Look at the identification plate on your screed. The manual applies to SRG2X100 and up. If your serial number falls in that range, this is the book. If not, you need a different edition. The manual’s Table of Contents has check marks next to the applicable bills of material — as explained on page 4. Do not order from any bill of material without a check mark. That’s not a suggestion; it’s a directive from the factory.

For context on how industry standards for repair documentation evolved, see Automotive Industry Overview. It gives background on why OEM documents remain the gold standard.

FAQ

Is this a reprint or a digital copy?

This is a high-quality digital scan of the original 1994 factory manual, not a reprint or third-party reproduction.

How do I know if my machine serial number is covered?

The manual covers SRG2X100 and up. Check the identification plate on your screed; the serial number is usually stamped on a metal plate near the right side. The manual’s Table of Contents has check marks next to the bills of material that apply to your serial number range. Do not order from any bill of material without a check mark. This is explained on page 4. If your machine is older or newer, you may need a different edition. Always verify before ordering parts. For example, if your screed is SRG2X099, this manual will not apply. Contact Barber-greene or use our related manuals for older models such as the Barber-Greene SA-41 series.

Stop wasting time with generic parts lists. Access the Factory Manual today and get the exact part numbers Barber-greene intended.