Description

Barber Greene SRGO 1983 Parts Catalog – OEM Factory Parts Breakdown for Extendamat Screed

If you’ve ever waited three weeks for a hydraulic filter that turned out to be the wrong thread pitch, you know why this catalog exists. That’s the kind of headache I see every week – a guy orders a part from memory or a generic cross‑reference, then the machine sits because the port size is off. The Barber Greene SRGO 1983 Parts Catalog stops that before it starts. This is the factory‑issued parts manual for the Extendamat Screed, serial‑number specific, 111 pages of drawings and part numbers that match what Barber‑Greene stamped into the metal. No second‑guessing. No repackaged aftermarket book. Just the original OEM data from 1983, exactly as the engineers laid it out.

Before you reach for a wrench or a phone to order parts, read the front matter. Page 2 lists the eleven pieces of information you must have ready. If you skip the serial number, you’re gambling. Page 3 shows the check‑mark system – only the listings with a check in front of them apply to your machine. Ignore that and you’ll order the wrong bearing bracket. I’ve seen it happen. This manual isn’t a suggestion; it’s the blueprint for keeping an old Extendamat running without chasing bad numbers.

What This Parts Catalog Covers (And What It Doesn’t)

This is a Parts Catalog, not a repair procedure manual. It contains exploded‑view illustrations with reference numbers, part descriptions, quantities, and Barber‑Greene part numbers. The hydraulics section (pages with check marks like A‑876‑000B) lists filters, seals, valves. The screed assembly sections show every bolt, bushing, and wear plate. You won’t find torque specs or step‑by‑step disassembly here – that’s the separate service manual. But when you need to confirm “is that a 16E56 filter or a 16W35” before you call your supplier, this catalog is what you put on the bench next to the phone.

3 Reasons to Use OEM Factory Parts Listings

1. Serial‑number tracking. Barber‑Greene issued this catalog for SRGQOX serial range. The check marks on each page tell you exactly which iterations apply. If your machine falls outside that range, you need a different edition. 2. Indentation shows assemblies. Assemblies and kits are listed with indented component parts underneath. Order the assembly number and you get everything – or order individual part numbers if that’s what the job needs. 3. Footnotes prevent mistakes. Notes on each page flag superseded parts, special ordering instructions, or differences between early and late builds. I’ve seen a footnote save a guy $400 on a wrong hydraulic motor.

How the Check Mark System Saves You Money

Open any page in this catalog and you’ll see a check mark (√) in front of some listings. That check mark means “this part number applies to your serial number.” The manual says it straight: “DO NOT order from a parts listing that DOES NOT have a check mark in front of it.” Follow that rule and you avoid returning the wrong clutch plate or waiting another week for the correct seal. Combine that with the reference key symbols on the illustrations – squares, circles, triangles – and you can point to the exact hole in the casting without guessing.

Ordering Parts the Right Way: The 11-Step Routine

Page 2 of the catalog lists eleven things you must give when you call or email your parts order. Machine model and serial number are non‑negotiable. Part numbers, description, quantity, which sub‑assembly the part goes in (e.g., “part of main transmission”). Shipping method – freight, truck, UPS, parcel post, or air. And whether the shipment is collect unless you specify otherwise. This is not a suggestion; it’s the factory procedure. Follow it and your order gets filled without a callback asking “which model?”.

Who Needs This Manual?

If you own or maintain a Barber‑Greene SRGO paver with an Extendamat Screed, this catalog belongs in your tool box. Home‑garage enthusiasts who restore old asphalt equipment will use it to source bearings, hoses, and sprockets. Small shop owners who take in odd‑ball construction repairs need it to quote jobs accurately. Beginners should treat it as a training aid – see how the factory organizes parts, what a proper illustration looks like, and why every bolt gets a reference number. Professionals will appreciate that it’s the same document the dealer’s parts counter uses, not a re‑typed list from some PDF aggregator.

Source Validity: Factory Print, Not Aftermarket Copy

This is an original digital copy of the 1983 Barber‑Greene publication. No aftermarket redraw, no third‑party transcription. The part numbers, footnotes, and illustrations are exactly as they appeared in the factory binder. I’ve seen aftermarket catalogs transpose digits in critical part numbers – a 16E56 becomes 16E65, and suddenly you’ve got a filter that doesn’t seal. Skip that headache. What you get here is the same data Barber‑Greene sent to their dealers in 1983, serial‑number specific and ready to print or view on your tablet.

If you’re cross‑referencing with other construction equipment manuals, check out Barber Greene BG-240 Parts Catalog – OEM Factory Parts Breakdown for Asphalt Pav and Barber Greene SRNO Screed Parts List 876-2500. For the larger SB‑170 paver platform, see Barber Greene SB-170 Asphalt Paver Parts Manual. And for a broader understanding of how OEM documentation fits into the automotive and heavy equipment industry, read the Automotive Industry Overview and Automotive Industry Overview.

Frequently Asked Questions

Does this manual include torque specifications for assembly?

No. This is a parts catalog – it lists part numbers, quantities, and illustrations. For torque specs you need the factory service repair manual, which is a separate document.

Can I use this catalog if my SRGO has been modified with non‑OEM components?

You can still use it for the original parts. Any aftermarket substitutions will not be listed. The catalog is serial‑number specific to the factory build. If you’ve retrofitted a different screed or hydraulic system, you’ll need to reference both this catalog and the specs from the replacement parts manufacturer.

How do I find the correct part number for a hydraulic filter?

Turn to the hydraulics section (pages with check marks). Look for the filter assembly listing – for example, A‑876‑000B – and then read the indented component list underneath. The filter element part number will be listed with its description. Cross‑check the note on that page for any superseded numbers. If your machine uses B‑876‑000B instead, the same procedure applies.

What if my machine’s serial number doesn’t match the cover?

This catalog was prepared for serial number SRGQOX. If your machine has a different prefix, the check marks on each page may not align. Contact Barber‑Greene or a dealer with your serial number to get the correct edition. Do not order parts from this catalog unless the check marks correspond to your machine.

Stop wasting money on wrong parts and machine downtime. Access the Factory Manual now and put the OEM parts data where it belongs – on your workbench next to the part you’re replacing.