Description

Barber-Greene BG-265B Parts Catalog

Let me tell you how many times I’ve seen a shop order the wrong part because they guessed the serial number. Plenty. That’s why this Barber-greene BG-265B Parts Catalog exists — 378 pages of factory-listed part numbers, indenture lines, and footnotes that tell you exactly what goes where. If you’re running a BG-265B asphalt paver, you need the actual OEM document, not some aftermarket reprint that leaves out the check marks. I’m Mike Callahan, and I’ve been burned by bad documentation more times than I care to admit. This one is the real deal.

Why the Serial Number Matters More Than You Think

Page 2 lays it out plain: you must give your machine’s serial number when ordering parts. Automotive Industry Overview That plate on the frame isn’t decoration. The catalog’s table of contents has been edited to match the serial number on the front cover — meaning the bills of material with a check mark in front are the only ones that apply to your machine. Order from a bill without that check mark and you’ll get the wrong piece. End of story.

A junior tech once asked me why he had three different filter part numbers for the same paver. I showed him the serial number breaks in this catalog. He shut up fast.

Bill of Materials – Not Just a List of Numbers

Page 3 explains how bills of material work. Each one has a reference number, and all items listed below it are part of that assembly. Before you call the supplier, verify the bill number in the table of contents. If you need a complete hydraulic pump assembly, order the assembly part number — all indented components come with it. Want only one gasket from that assembly? Order that individual part number instead. The manual shows you both paths.

Reading the Notes and Footnotes

Many pages in this 378-page Parts Catalog contain notes that give you critical ordering hints. For example, a footnote might say “Use with serial number prefix 9X1977 only.” Ignore that note and you’re stuck with a part that doesn’t fit. The example on page 3 shows a footnote designation — a small superscript number next to the part number — that directs you to a special instruction at the bottom of the page. Read every note. Every single one.

Indenture and Assembly Structure

Look at any parts list in this catalog. The description of component parts is indented under the assembly they belong to. If the assembly part number has a kit indicator, all indented parts come as a set. But if you order the kit, you get everything — even parts you might already have. That’s why the manual tells you to order individual items when you only need one piece. It’s common sense, but I’ve seen guys order the $800 valve kit instead of a $12 seal because they didn’t read the indenture.

One more thing: the indention format is consistent across all 378 pages. Once you learn it, you can flip to any section and find the exact component without guessing.

How to Order Parts the Right Way

The manual gives you a ten-step ordering checklist on page 2. I’ll save you the page turn: give your order number, machine model, serial number, part numbers, description, quantity, sub-assembly name, shipping method, and both ship-to and bill-to addresses. Barber-Greene BG-245B BG-260B BG-265B BG-270B BG-750 Manual Then state whether shipment is collect. Miss any of those and the dealer calls you back asking for clarification. That wastes time. I’ve seen shops miss the “ship to” address and the part ends up across the country.

Does This Manual Cover Every BG-265B?

Yes and no. The catalog covers the BG-265B model but the table of contents is serial-number-specific. Your machine’s serial number determines which bills of material apply. If you own a 1991 BG-265B, you need the version of this catalog that matches that production run. Barber-Greene SA-41, SA41 X 101, SA41 X 868 1971 Parts Catalog This particular copy is a 378-page original from Barber-greene (a division of Caterpillar Paving Products Inc.) dated November 7, 1991. It covers the BG-265B asphalt paver with the serial number that’s printed on the cover.

Use the table of contents to find the right bill of material for your serial number. If you don’t see a check mark, stop. Barber-greene BG260 Parts Catalog – 253 Pages of Factory Parts Breakdown That bill doesn’t belong to your machine.

What’s the difference between this parts catalog and a service manual?

A parts catalog tells you which part number fits. A service manual tells you how to install it. This is pure parts identification – no repair procedures, just exploded views and part lists.

Can I use this catalog if my BG-265B serial number starts with a different prefix than the cover?

Not reliably. The catalog’s table of contents has been filtered to match the cover serial number. If your machine has a different prefix – for example, 9X1977 instead of something else – you need the catalog that corresponds to your serial number. The bills of material with check marks are the only valid ones for that specific machine. Ordering from a bill without a check mark risks getting parts that won’t fit. That said, many components carry over across serial number breaks. The only way to be sure is to cross-reference the part number with your machine’s serial number using the notes and footnotes provided. If you don’t see your serial number range listed, call the dealer with both the catalog part number and your machine serial number before ordering.

Access the Factory Manual and get the correct part numbers the first time. No more guessing, no more returns, no more wasted hours on the phone with the parts counter.