Description

Terex TR35 Operators Manual – Factory Operation, Safety and Maintenance

I’ve watched operators skip the handbook and then spend a shift chasing a hydraulic leak they could have avoided. The Terex TR35 Operators Manual is the document you want in the cab — not a grainy copy from a forum. It runs 116 pages of factory wording, printed by Terex Equipment Limited in Motherwell, Scotland. Part number 15273177 is the only number that matters when you reorder.

Part number 15273177 is stamped on the cover, and that number ties directly to Terex’s technical publications department. The manual was revised November 2000 (Ref No. OHE 788 Rev 1), so you’re getting the same information the original operators received. No aftermarket rewrite, no condensed version that leaves out the critical warnings.

Only Trained Personnel Should Operate This Vehicle

Page 3 states it plain: “ONLY TRAINED PERSONNEL SHOULD BE ALLOWED TO OPERATE THIS VEHICLE.” That’s not a suggestion. The manual backs it up with step-by-step pre-start checks, daily inspection lists, and emergency shutdown procedures. If you manage a crew, this page alone justifies the cost of the manual — it covers your liability and your operator’s safety.

California Proposition 65 Warnings: What You Need to Know

California requires warnings for diesel exhaust and lead exposure. Page 5 spells out both: diesel engine exhaust is known to cause cancer, and battery terminals contain lead. This isn’t boilerplate — if you operate in California, you need this exact language on hand for compliance. The manual includes it verbatim, so you have the factory reference for any inspection.

Part Number 15273177 – The Only Genuine Terex Manual

When you order parts or service for the TR35, dealers will ask for the part number on the manual. 15273177 is the one. It matches the original handbook that shipped with the machine. That means no guessing which revision applies — this is the exact document Terex backs. For related component lookup, pair it with the TEREX TR35 2006 Parts Catalog to get the correct part numbers for seals, filters, and hoses.

7 Critical Sections in the 116-Page Handbook

The manual is divided into three main areas: Operation, Safety, and Maintenance. Within those, you’ll find dedicated sections for engine start-up and shut-down, transmission shifting patterns (including the Manual Transmission specifics), dump body controls, steering system checks, brake adjustment procedures, daily fluid level inspections, and long-term storage preparation. Each section includes warnings and notes that prevent common mistakes. A good operators manual walks you through the startup sequence — this one does it.

For example, the TEREX TR35 Maintenance Manual adds the service intervals and torque values that the operator’s manual references. Together they cover the full life of the machine.

Is This Manual Still Relevant After 20 Years?

Yes, if the machine has not undergone major retrofits. The TR35 platform remains in use, and Terex still supports the base design. The operation procedures, safety protocols, and maintenance intervals have not changed. The manual includes the original Manual Transmission shift pattern and control layout — if your TR35 is bone stock, this manual is current. Always verify against your machine’s serial number, but for standard models this is the correct reference.

OEM Print vs. Aftermarket Copies – The Real Difference

Aftermarket manuals often omit the Proposition 65 text, skip page numbers, or rephrase procedures. This is a direct scan of the Terex original. Every page margin matches the factory print. The part number 15273177 is the same that appears on the physical handbook. If you need to prove to a safety inspector that the correct documentation is in the cab, this is it. For other models in the Terex lineup, check the Terex TA400 2012 Operators Manual – Factory Specs for similar factory coverage.

116 pages. Factory binding. That’s all you need.

What is the publication date of this manual?

November 2000, revision 1. Ref No. OHE 788 Rev 1.

Does the manual include the California Proposition 65 warnings required for operation in California?

Yes. Page 5 contains two specific warnings: one for diesel exhaust carcinogens and one for lead in battery components. The text is reproduced exactly from the Terex factory print. This satisfies the state requirement for posting warnings in the cab and provides documentation for compliance audits. Many aftermarket copies skip this altogether, leaving operators exposed to fines.

Stop wasting time on photocopies and documents that miss pages. Access the Factory Manual from AutoRepairManuals and get the real Terex TR35 operator’s handbook with all 116 pages, the correct part number, and the safety warnings you need.