Description

TCM FG15C9H, FD15C9H, FG15T9H, FD15T9H, FG18C9H Parts Catalog

If you are maintaining a TCM forklift in your shop or warehouse, the first thing you need is the right part number. Not a guess. Not a cross-reference from a third-party website. A factory-verified number that matches the stamped plate on your machine. That is what this TCM FG15C9H, FD15C9H, FG15T9H, FD15T9H, FG18C9H Parts Catalog delivers — 262 pages of OEM-issued diagrams and part lists for the chassis and drivetrain components of these gas and diesel forklifts.

I have been wrenching for 28 years. I have seen guys order a water pump three times because they went off a blurry online image. A parts catalog like this stops that. You get a figure number, a part number, and a quantity. That is it. No translation errors. No aftermarket re-draws.

Catalog runs from Figure 1 (Engine Mount G-Type) all the way through Figure 98 (Service Tool [EXB][EXC]). The OCR excerpt shows the Japanese and English introduction — the manual is bilingual. That matters when you are reading an older machine’s plate and need to decode abbreviations. RH, LH, AR, ASSY — all defined on page 2. No ambiguity. The contents page (page 3) uses columns a through h to indicate which specific model or variant each figure applies to. For example, Figure 1 (Engine Mount G-Type) has circles in all columns, meaning it covers all variants. Figure 15 (Steering Shaft Cover C-Type) only covers manual transmission models. The introduction explains abbreviations: RH/LH, ASSY, AR, T for thickness, + for not illustrated, # for not sold separately. This level of detail prevents ordering a part that does not fit.

Engine mounting diagrams for gas and diesel models are split into Figures 1 and 2. If you are swapping a mount on a FG15C9H, you pull Figure 1. FD15C9H diesel? Figure 2. The catalog also splits air cleaner, air duct, cooling, fuel system, exhaust, and combination meter by engine type. Makes it hard to grab the wrong bracket or isolator.

Cooling units (Figures 7 and 8) and fuel systems (Figures 9 and 10) get separate coverage. Each figure lists every clamp, hose, gasket, and component. Need a fuel tank? Figure 68 (G-Type) or 69 (D-Type). The catalog includes separate entries for radiator covers, bonnets, floor boards, and seats. It even breaks out decals in two parts — Figure 94 and 95 for Japanese spec, Figures 96-97 for export.

The contents table also shows which sub-models each figure applies to. If a part is marked with a “#”, it is not sold separately. If it has an asterisk, it is a set or kit. All spelled out in the introduction.

Page 1 of the catalog in Japanese, page 2 in English: “Always use TCM’s Genuine Parts. We cannot guarantee any loss or trouble attributable to other parts than ours.” That is not a sales pitch — it is a liability warning. Aftermarket parts catalogs often re-number or combine part listings. This is the factory document used by TCM dealers. If you need a part for your FG18C9H, this is the source.

Original OEM print.

The catalog covers 98 figure numbers across drive unit mounts, clutch packs, torque converter cases, differentials, steering axles, hydraulic lines, tilt cylinders, and more. It includes the [OBT][EXC] and [EXB] variants for Orbitrol steering and export models. See related manuals like TCM FG15C9H FD15C9H Parts Catalog for additional coverage. For specific sections like speed alarm, refer to TCM FG15C9H FD15C9H Series Forklift Parts Catalog – Section: Speed Alarm System. If you need heavy-duty models, check TCM FD60Z8 FD70Z8 FD80Z8 FD100Z8 Parts Catalog – 650 Pages.

For context on forklift engine types, see Internal Combustion Engine. The automotive industry relies on standardized part numbering; Automotive Industry Overview explains why factory catalogs matter.

One more thing: this is a parts catalog, not a service manual. It will not tell you how to replace a clutch pack. It will tell you exactly which gasket and seal kit to order. Pair it with the factory service manual for the torque specs and procedures.

Does this catalog include torque specifications or repair procedures?

No. This is a parts catalog. It lists component part numbers, quantities, and illustrations. For torque values and step-by-step repair, you need the separate TCM service repair manual.

Will this manual work for my FD15C9H with a serial number starting with 5F?

Yes, provided your machine falls within the model range. The catalog covers all serial numbers for those models, but always verify the serial number on the machine nameplate.

How do I decode the abbreviations like “OBT” or “EXC” in the figure titles?

Those denote optional equipment. “OBT” likely refers to Orbitrol steering system. “EXC” is export specification. The catalog lists separate figures for those variants (e.g., Steering Axle [OBT][EXC] Figures 38, 42). Check the contents table to see which figure applies to your machine’s options. The introduction on page 2 gives the full list of abbreviations: ASSY, RH, LH, AR, *, T, +, #. If you see a code like [EXB], that is a further export variant with its own decal section (Figures 96-97).

What is the difference between G-Type and D-Type sections?

G-Type covers gasoline/LPG engine models (FG15C9H, FG18C9H). D-Type covers diesel engine models (FD15C9H, FD15T9H). The chassis and drivetrain sections are split accordingly. Figures 1-14, 55-56, 59-60, 68-69, 76-77, 85-86 all have separate G and D entries.

If you maintain a TCM forklift, this catalog belongs on the workbench next to the service manual. Stop guessing part numbers. Access the Factory Manual and get the correct factory numbers for your FG15C9H, FD15C9H, FG15T9H, FD15T9H, or FG18C9H.