Description

TCM FG10C19, FD10C19, FG10T19, FD10T19, FG15C19 Parts Catalog

If you have ever fought with an aftermarket parts catalog that lists the wrong seal or a bracket that doesn’t match your truck, you know the headache. That wasted hour flipping pages, cross-referencing, then ordering the wrong piece – it adds up. This TCM FG10C19, FD10C19, FG10T19, FD10T19, FG15C19 Parts Catalog is the OEM print from TCM, 272 pages of factory exploded diagrams and part numbers. No third-party renumbering, no generic drawings. You get the exact numbers TCM stamped on the casting.

CHASSIS Section: Where the Real Work Begins

The table of contents splits the truck into clear sections. You will find CHASSIS first, then sub-sections for engine mount, air cleaner, cooling unit, fuel system, exhaust, combination meter, steering shaft cover, electric parts, light unit, license light, drive unit mount, clutch, mission case, torque converter, control valve, and more. Each section is labeled G-TYPE for gas or D-TYPE for diesel. The T-TYPE and C-TYPE designations separate steering shaft covers and drive unit mounts for different chassis variants. That kind of detail means you don’t order a gas engine mount for a diesel truck – something I have seen many garages do with generic catalogs.

Engine Mounts for G-Type and D-Type: Two Different Binders

Engine mount diagrams are separate for gas and diesel. The G-TYPE uses a different rubber isolator and bracket than the D-TYPE. The parts list includes thickness indicators (T) and assembly codes (ASSY). When you look at the illustration, the part number is right there. Compare that to a reprint where the illustration is blurred and the numbers are smeared – this manual is a clean scan from the original TCM binder.

Cooling Unit Differences Between Gas and Diesel

Radiators, shrouds, and fan assemblies differ between the FG10C19 (gas) and FD10C19 (diesel). The cooling unit section shows each variant with separate figure numbers. If you need a fan blade for a FD10T19, you turn to the D-TYPE cooling unit page and read the exploded view. The part numbers are listed with the exact quantity required (AR for as required). No guesswork.

Fuel System: Gas vs. Diesel Routing

Fuel lines, tanks, and filters are laid out in two separate sub-sections. The gas system includes a carburetor or fuel injection components; the diesel system shows the injection pump and lines. Each illustration has a figure number (FIG.) that corresponds to the parts list. I have seen techs try to use a gas fuel line on a diesel truck – the fittings are different. This manual prevents that mistake because the illustrations are side-by-side for each fuel type.

Electric Parts Layout for G-Type and D-Type

Wiring harnesses, switches, and sensors are covered in the ELECTRIC PARTS section. Again, separate for gas and diesel. The combination meter section also splits by engine type. If you are chasing a no-start on a FG15C19, the ignition switch part number is listed with the correct harness connector shape – critical when ordering from a dealer.

MISSION CASE (C-Type) and (T-Type): What to Watch For

Transmission components are separated by chassis type. The C-type mission case includes the torque converter and clutch components. The T-type uses a different pump (Chalink pump) and clutch pack. Each has its own figure numbers and part lists. If you mix up the seal kit between a C-type and T-type transmission, you will be pulling the unit apart again. This manual makes that mistake impossible because the parts are listed in their own sections with clear labels.

OEM Source: Why You Need the Factory Print

This is a genuine TCM CORPORATION parts manual. The introduction states: “This Parts Manual contains the component parts of the TCM FORKLIFT TRUCK.” It includes instructions on how to read the illustrations and abbreviations (ASSY, RH, LH, AR, etc.). The Japanese section (which mirrors the English) confirms the exact same content. No reprint house has touched this. The page count is 272, the file name is TCM_FG10C19-FD10C19-FG10T19-FD10T19-FG15C19_Parts_Catalog_en-44914007735.pdf. That is the digital version of the binder I used in the shop.

Who Needs This Manual? The Home Mechanic and the Pro

If you own a FG10C19, FD10C19, FG10T19, FD10T19, or FG15C19 forklift and plan to do your own maintenance, you need this catalog. Without it, you will be calling the dealer with a vague description and hoping they send the right part. With it, you call with a part number – the conversation ends in two minutes. I have used these manuals for years to rebuild transmissions and replace cooling systems. The only difference between this and the paper copy is the PDF is searchable. You can open it on a tablet in the shop and zoom in on the illustration.

For a broader view of the entire TCM forklift lineup, the TCM FG10C19 FD10C19 FG10T19 FD10T19 FG15C19 Parts Catalog 559 Pages offers more models. If you work on larger machines, the TCM FD60Z8 FD70Z8 FD80Z8 FD100Z8 Parts Catalog – 650 Pages covers heavy-duty units. And for engine-specific parts, the TCM Isuzu-4218A-E Parts Catalog – 478 Pages OEM Factory Manual is a companion. For a background on how these forklifts fit into the Automotive Industry Overview, read up on material handling. The internal combustion engine principles are covered in the Internal Combustion Engine article.

FAQ

Does this parts catalog cover the FD15C19 model?

No. It covers FG10C19, FD10C19, FG10T19, FD10T19, FG15C19. The FD15C19 and larger models are in a different catalog.

How are the parts organized in the manual?

The manual is divided into sections like CHASSIS, ENGINE MOUNT, COOLING UNIT, FUEL SYSTEM, etc. Each section has separate sub-sections for gas (G-TYPE) and diesel (D-TYPE) as well as for C-type and T-type chassis. Every part has an illustration, figure number, and part number. You locate your truck’s model and spec, then find the figure number from the table of contents. It’s systematic. The index at the back helps if you know the part name.

Is this a genuine OEM manual or a reprint?

It is a digital copy of the original TCM factory parts manual. The PDF is scanned from the official binder. No aftermarket edits or renumbering. The cover, the Japanese text, and the English instructions all match the OEM document.

What page has the engine mount parts for the FD10C19?

That depends on the exact sub-section. The engine mount section falls under CHASSIS and is labeled D-TYPE. The figure number will be listed in the table of contents. You will need to locate the correct figure for D-TYPE engine mount – the manual is 272 pages, so use the index.

Stop wasting time with parts that don’t fit. Access the Factory Manual from AutoRepairManuals and get the OEM data on your screen. Your forklift will thank you – and so will your wallet.