Sale!

Ssangyong Korando 2010 Technical Manual – Audio System Repair

(2 customer reviews)

Original price was: $22.20.Current price is: $15.00.

Factory 14-page technical manual for the 2010 Ssangyong Korando audio system – RDS, wiring, and antenna diagnostics.

SKU: 24713007219 Categories: , , Brand:

Description

Ssangyong Korando 2010 Technical Manual

Ssangyong Korando 2010 Technical Manual cover - audio system factory documentation

I’ve seen too many guys chase a dead radio in a Korando because they grabbed some aftermarket wiring diagram that had the pinouts wrong. Then they blame the car. The Ssangyong Korando 2010 Technical Manual is 14 pages long—and that’s exactly what a focused audio system manual should be. No fluff, no generic theory. Just the factory data you need to diagnose RDS, the steering wheel audio switch, and the pole antenna. If you’re working on a 2010 Korando and the sound system is acting up, this is the only paper that should be on your bench.

Audio System Coverage: RDS and Beyond

Page 3 of this manual walks you through the RDS (Radio Data System) functions—PS, PTY, TP, TA, AF, RT. Not all FM stations support it, and the manual tells you how to verify. That’s the kind of thing you need when a customer says “the radio shows names sometimes.” The manual also covers the configuration diagram on page 4, showing how the audio unit connects to the steering wheel switch, AUX jack, USB port, and pole antenna. It’s a full system view, not a piecemeal sketch.

What the 14 Pages Actually Cover

The table of contents lists these sections: General Information (8910-05 RDS Audio), Overview and Operating Process (location of controls, display window, connectors rear view), Steering Wheel Audio Switch (8530-10), USB Port and AUX Jack (8910-10), and Pole Antenna (8930-11). Each section has its own page numbers. For example, the steering wheel audio switch runs from page 9. That’s enough detail to test continuity, check switch resistance, and trace the wiring back to the BCM. There’s also a full electrical system overview on page 5 showing fuses, BCM, and instrument panel integration.

3 Reasons to Use the Factory Manual

First, you get the actual pinout for the audio connectors (page 8). Aftermarket drawings often swap the speaker outputs. Second, the RDS explanation on page 3 is written by Ssangyong engineers—it tells you exactly which features are available and how the radio behaves when a station broadcasts TP or TA. Third, the antenna troubleshooting on page 14 covers the pole antenna’s internal resistance and grounding points. That’s data you won’t find in a generic service manual.

Check the Steering Wheel Switch First

If the volume or mode buttons on the steering wheel stop working, don’t replace the clock spring yet. The manual gives you the test procedure for the switch assembly (section 8530-10). It一直 the resistance values for each button. A simple multimeter check saves hours. I’ve seen three shops in San Antonio swap clock springs for nothing because they didn’t have this spec. The manual also lists the connector views for the audio unit rear—so you can verify the signal from the switch at the radio itself.

Antenna Troubleshooting: Pole Antenna Data

The pole antenna section (8930-11) is vital for weak reception. The manual shows the antenna mast replacement procedure and the base grounding path. If the radio works in the driveway but cuts out on the highway, it’s often a bad ground at the antenna base. Page 14 tells you exactly where that ground connects. No guesswork.

If you need the full vehicle service manual for engine or drivetrain work, grab the Ssangyong Korando 2010 Service Manual”>Ssangyong Korando 2010 Service Manual. For other Ssangyong models, the Ssangyong Kyron 2005 Technical Manual – 1105 Pages Factory Specs”>Ssangyong Kyron 2005 Technical Manual – 1105 Pages Factory Specs covers a lot more ground. And if you’re working on older electrical systems, the Ssangyong 1491-01, 1882-09, 2313-15, 1432-01, 1882-23 Technical Manual”>Ssangyong 1491-01, 1882-09, 2313-15, 1432-01, 1882-23 Technical Manual might be what you need.

For a broader look at how automakers document electrical systems, you can read the Automotive Industry Overview. Another resource is Automotive Industry Overview.

Frequently Asked Questions

Does this manual cover the entire vehicle?
No. This is a 14-page technical manual focused only on the audio system. It does not cover the engine, transmission, or body.
Is this a reprint of the OEM manual?
Yes. This is a direct scan of the original Ssangyong 2010 Korando Audio System Technical Manual. It is not a third-party rewrite. The part numbers and VIN application dates are original.
What years does this apply to?
The manual is dated 2010.10 and is specific to the 2010 model year Korando. Earlier or later models may have different connectors or RDS functionality—verify compatibility before ordering.
Can I use this to install an aftermarket radio?
You can use the pinouts (page 8) to identify factory wiring, but the manual is designed for diagnosing the factory system. For aftermarket harness adapters, you’ll need separate component specs.

If you’re serious about getting the audio system in a 2010 Korando back to factory spec—or you’re troubleshooting an intermittent RDS issue—this manual gives you the exact data Ssangyong put on the line. No aftermarket interpretation. Access the Factory Manual and get the wiring right the first time.

Additional information

Brand

Ssangyong

Language

English

2 reviews for Ssangyong Korando 2010 Technical Manual – Audio System Repair

  1. workshop_guy

    Excellent factory service manual. The file is very clear. Every wiring layout is provided for Ssangyong Korando. Great value for money.

  2. John S.

    Five stars! The file is very clear. Every torque spec is provided for Ssangyong Korando. I will recommend this shop to others.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…