Description

Schäffer 5060ZL 2005 Parts Catalog – OEM Factory Spare Parts List

If you’re chasing a part number for a Schäffer 5060ZL and you’re tired of aftermarket catalogs that list dimensions that don’t match the casting on your loader, this is what you need. The Schäffer 5060ZL 2005 Parts Catalog is a 54-page factory document – original OEM print, not a third-party rehash. I’ve seen too many guys order a steering cylinder seal kit based on a generic cross-reference only to find the bore is wrong. Don’t be that guy. This catalog gives you the drawing number and the Schäffer part code. No guesswork.

Hydraulics Coverage: Steering Cylinder, Lift Cylinder, and Tool Cylinder

Chapter 1 covers Lenkzylinder (steering cylinder), Chapter 2 handles Hubzylinder Z-Kinematik (lift cylinder Z-kinematics), and Chapter 4 goes over Werkzeugzylinder Z-Kinematik (tool cylinder Z-kinematics). Each one lists the exact part number for the cylinder assembly, seals, and end fittings. Page 5 of the PDF index shows these grouped together. You can cross-reference the exploded diagram with the casting number on your machine. I’ve used these for a 5060ZL that came in with a leaking hub cylinder – the factory diagram matched the stampings perfectly. Aftermarket lists often skip the Z-kinematic variants; this one doesn’t.

Does This Parts Catalog Cover the Cab Interiors?

Yes. Starting on page 5 under “Kabine Dieteg Typ 5058 ab 09.’01,” you get sections K 2.1 through K 2.8 – including the cab frame (Rahmen 1 and 2), left/right door (Tür links / rechts), seat flap and heater (Sitzklappe / Heizung), switch cover (Abdeckung Schalter), and sound insulation (Schalldämmung). If you’re piecing together a cab interior for a 5060ZL with a Dieteg cab, this catalog saves you from ordering mismatched panels. One of my customers had a broken heater cover – we found the part number in K 2.6 and had it in three days.

3 Critical Systems with Complete Part Breakdowns

The catalog breaks down the entire machine. Notable sections: Chapter 23 Kraftstoffanlage (fuel system), Chapter 24 Auspuffanlage (exhaust), Chapter 25 Luftfilteranlage (air filter), and Chapter 26 Wasser- Ölkühler (water/oil cooler). Each lists every bolt, bracket, and hose. For the chassis, Chapters 27 and 29 cover front/rear axle (Vorder-/ Hinterachse) and tires (Bereifung) with date-specific changes – axle assembly detail is noted “ab 01.07.2001.” Needs a tie rod end? Chapter 30 Feststellbremse / Gelenkwelle (parking brake / driveshaft) has the part numbers for the entire brake linkage.

Get the Right Part Numbers for Your 5060ZL

Stop relying on memory or next-best-guess. Grab this catalog, match the diagram to your machine, and order the factory part. It covers the steering system (Lenkung, Chapter 7), main hydraulic control unit (Steuergerät u. Bedienungshebel, Chapter 9), and even the drive pedals (Fahrpedale, Chapter 15). Every page is scanned from the original 2005 print. The Schäffer D905-E2B-EU-XL1 Parts Catalog – OEM Factory Spare Parts List is a related manual for a larger loader, but for the 5060ZL this is the one. If you also have an older model, check the Schäffer 3026 3033(S) Parts Catalog 2005 – AutoRepairManuals and Schäffer 4042, 4048 2006 Parts Catalog – OEM Factory Spare Parts List for those series.

Lenkung Steering System: Part Number Breakdown

Chapter 7 – Lenkung – gives you the steering column and valve assembly. Includes the steering cylinder from Chapter 1. The diagram shows every O-ring, bushing, and hydraulic line. I’ve had to replace the steering column bearing in a 5060ZL; without this catalog I’d have ordered a generic bearing that didn’t fit. The factory part number was listed right there. One page covers the whole assembly.

This catalog isn’t a service manual – it won’t tell you torque values or repair steps. It’s a parts identification book. For the construction equipment industry context, see the Automotive Industry Overview for background on OEM documentation standards. Also check Automotive Industry Overview for more on why factory prints matter.

A final note: the catalog is in both German and English. Part numbers are the same regardless of language. 54 pages, scanned clean. Use it to order with confidence – or better, to check what you’ve already got in stock before you call the dealer. Access the Factory Manual so the next time a 5060ZL rolls into your bay you’re not guessing.

Does this catalog include torque specifications?

No, this is a parts catalog, not a service manual. Torque specs are not listed.

What years does this cover?

2005 specifically. Later models may differ.

Are part numbers still available from Schäffer?

Some numbers may be superseded. Compare with current dealer stock. The catalog gives you the starting point to order the correct component. Using the factory reference ensures you get the exact seal kit or hydraulic cylinder rather than a universal fit that will leak within 100 hours.

Can I use this for the 5060ZL with cab?

Yes, it includes cab sections for Dieteg Type 5058.